From 6e9e6c36a6a52562edb3e3b93cbad33f9dfe5585 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Thu, 26 Apr 2012 03:54:22 +0000 Subject: powerpc/ppc4xx: Make gdsys 405ep boards reset more generic In order to add boards that have different hardware for fpga reset, any 405ep gdsys board now provides these functions: void gd405ep_init(void); void gd405ep_set_fpga_reset(unsigned state); void gd405ep_setup_hw(void); int gd405ep_get_fpga_done(unsigned fpga); Signed-off-by: Dirk Eibach Cc: Stefan Roese Signed-off-by: Stefan Roese --- board/gdsys/405ep/405ep.c | 42 +++++++++++++++++++----------------------- 1 file changed, 19 insertions(+), 23 deletions(-) (limited to 'board/gdsys/405ep/405ep.c') diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index 8b80533..bea671e 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -28,12 +28,9 @@ #include #include +#include "405ep.h" #include -#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) -#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) -#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) - #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) @@ -55,7 +52,6 @@ void print_fpga_state(unsigned dev) int board_early_init_f(void) { unsigned k; - unsigned ctr; for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) gd->fpga_state[k] = 0; @@ -73,26 +69,29 @@ int board_early_init_f(void) * -> ca. 15 us */ mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ + return 0; +} - /* - * setup io-latches for reset - */ - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); +int board_early_init_r(void) +{ + unsigned k; + unsigned ctr; - /* - * set "startup-finished"-gpios - */ - gpio_write_bit(21, 0); - gpio_write_bit(22, 1); + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->fpga_state[k] = 0; /* - * wait for fpga-done + * reset FPGA */ + gd405ep_init(); + + gd405ep_set_fpga_reset(1); + + gd405ep_setup_hw(); + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { ctr = 0; - while (!(in_le16((void *)LATCH2_BASE) - & CONFIG_SYS_FPGA_DONE(k))) { + while (!gd405ep_get_fpga_done(k)) { udelay(100000); if (ctr++ > 5) { gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED; @@ -101,12 +100,9 @@ int board_early_init_f(void) } } - /* - * setup io-latches for boot (stop reset) - */ udelay(10); - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + + gd405ep_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); -- cgit v1.1 From 0e60aa85c82863f34cb13145caa1d0c5255b977b Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Fri, 27 Apr 2012 10:33:46 +0200 Subject: powerpc/ppc4xx: Remove typedefs for gdsys FPGA Signed-off-by: Dirk Eibach Cc: Stefan Roese Signed-off-by: Stefan Roese --- board/gdsys/405ep/405ep.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'board/gdsys/405ep/405ep.c') diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index bea671e..bc9b7d0 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -105,7 +105,8 @@ int board_early_init_r(void) gd405ep_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); + struct ihs_fpga *fpga = + (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); #ifdef CONFIG_SYS_FPGA_NO_RFL_HI u16 *reflection_target = &fpga->reflection_low; #else -- cgit v1.1