From f110fe940c7bca04cf0104952555fd931b075fac Mon Sep 17 00:00:00 2001 From: Stephen George Date: Wed, 20 Jul 2011 09:47:26 -0500 Subject: powerpc/85xx: Adding configuration for DCSRCR to enable 32M access Configuring DCSRCR to define the DCSR space to be 1G instead of the default 4M. DCSRCR only allows selection of either 4M or 1G. Most DCSR registers are within 4M but the Nexus trace buffer is located at offset 16M within the DCSR. Configuring the LAW to be 32M to allow access to the Nexus trace buffer. No TLB modification is required since accessing the Nexus trace buffer from within u-boot is not required. Signed-off-by: Stephen George Signed-off-by: Kumar Gala --- board/freescale/corenet_ds/law.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'board/freescale') diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c index dd6f6f7..58f23c5 100644 --- a/board/freescale/corenet_ds/law.c +++ b/board/freescale/corenet_ds/law.c @@ -37,7 +37,8 @@ struct law_entry law_table[] = { #endif SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), #ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -- cgit v1.1