From d736ebea1cc335e89643656c3db33f5df55ffb16 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 25 Oct 2011 03:14:00 +0000 Subject: mx51evk: Use GPIO API for configuring the IOMUX GPIO API provides mxc_request_iomux function for setting the IOMUX mode. Use this function instead of directly writing to the IOMUX register. Signed-off-by: Fabio Estevam --- board/freescale/mx51evk/mx51evk.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'board/freescale') diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 2a0dad0..afb1c30 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -254,16 +254,14 @@ static void power_init(void) pmic_reg_write(p, REG_MODE_1, val); udelay(200); - gpio_direction_output(46, 0); - - /* Reset the ethernet controller over GPIO */ - writel(0x1, IOMUXC_BASE_ADDR + 0x0AC); - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | VVIDEOEN | VAUDIOEN | VSDEN; pmic_reg_write(p, REG_MODE_1, val); + mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); + gpio_direction_output(46, 0); + udelay(500); gpio_set_value(46, 1); -- cgit v1.1