From 7e183cad0c5ab6415dca95d6ac290ea918b28c55 Mon Sep 17 00:00:00 2001 From: Liu Yu Date: Fri, 10 Oct 2008 11:40:59 +0800 Subject: Enabled the Freescale SGMII riser card on 8572DS This patch based on Andy's work. Including command 'pixis_set_sgmii' support. Signed-off-by: Liu Yu --- board/freescale/mpc8572ds/mpc8572ds.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'board/freescale') diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 74f1df2..b2402dc 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -33,8 +33,10 @@ #include #include #include +#include #include "../common/pixis.h" +#include "../common/sgmii_riser.h" #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -519,6 +521,52 @@ unsigned long get_board_ddr_clk(ulong dummy) } #endif +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[4]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC4 + SET_STD_TSEC_INFO(tsec_info[num], 4); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + fsl_sgmii_riser_init(tsec_info, num); + + tsec_eth_init(bis, tsec_info, num); + + return 0; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { -- cgit v1.1