From 5b547f3c20cc0d394f0bbab817e2a50d1a18235f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 May 2012 10:25:59 +0000 Subject: mx53loco: Add mc34708 support and set mx53 frequency at 1GHz Add mc34708 support and set mx53 core frequency at its maximum value of 1GHz. Signed-off-by: Fabio Estevam Acked-by: Jason Liu Acked-by: Stefano Babic --- board/freescale/mx53loco/mx53loco.c | 48 +++++++++++++++++++++++++++---------- 1 file changed, 36 insertions(+), 12 deletions(-) (limited to 'board/freescale') diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 7ed5c4e..8f5ded9 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -38,6 +38,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -319,23 +320,46 @@ static void setup_iomux_i2c(void) static int power_init(void) { - unsigned int val, ret; + unsigned int val; + int ret = -1; struct pmic *p; - pmic_dialog_init(); - p = get_pmic(); + if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { + pmic_dialog_init(); + p = get_pmic(); - /* Set VDDA to 1.25V */ - val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; - ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val); + /* Set VDDA to 1.25V */ + val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; + ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val); - ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val); - val |= DA9052_SUPPLY_VBCOREGO; - ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val); + ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val); + val |= DA9052_SUPPLY_VBCOREGO; + ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val); - /* Set Vcc peripheral to 1.35V */ - ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62); - ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62); + /* Set Vcc peripheral to 1.30V */ + ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62); + ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62); + } + + if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) { + pmic_init(); + p = get_pmic(); + + /* Set VDDGP to 1.25V for 1GHz on SW1 */ + pmic_reg_read(p, REG_SW_0, &val); + val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708; + ret = pmic_reg_write(p, REG_SW_0, val); + + /* Set VCC as 1.30V on SW2 */ + pmic_reg_read(p, REG_SW_1, &val); + val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708; + ret |= pmic_reg_write(p, REG_SW_1, val); + + /* Set global reset timer to 4s */ + pmic_reg_read(p, REG_POWER_CTL2, &val); + val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708; + ret |= pmic_reg_write(p, REG_POWER_CTL2, val); + } return ret; } -- cgit v1.1