From 10ddb7764160b44205152cb52f95986736367f01 Mon Sep 17 00:00:00 2001 From: Wayne Zou Date: Mon, 22 Aug 2011 10:45:25 +0800 Subject: ENGR00155138 mx53_smd/mx53_loco: Add i2c retry to fix DA9053 i2c NAK issue when board boots up, during the iMX53 SOC does DA9053 Read/Write operation, it writes slave address and wait for ACK . Instead of ACK PMIC sends NAK. A workaround fix is provided as a part of retries to fix I2C NAK for very first access. Signed-off-by: Wayne Zou --- board/freescale/mx53_loco/mx53_loco.c | 12 ++++++++++-- board/freescale/mx53_smd/mx53_smd.c | 11 ++++++++++- 2 files changed, 20 insertions(+), 3 deletions(-) (limited to 'board/freescale') diff --git a/board/freescale/mx53_loco/mx53_loco.c b/board/freescale/mx53_loco/mx53_loco.c index 5a5e820..c88412e 100644 --- a/board/freescale/mx53_loco/mx53_loco.c +++ b/board/freescale/mx53_loco/mx53_loco.c @@ -704,8 +704,9 @@ int check_recovery_cmd_file(void) int board_late_init(void) { - int value; + uchar value; unsigned char buf[4] = { 0 }; + int retries = 10, ret = -1; if (!i2c_probe(0x8)) { if (i2c_read(0x8, 24, 1, &buf[0], 3)) { @@ -735,7 +736,14 @@ int board_late_init(void) } else if (!i2c_probe(0x48)) { /* increase VDDGP as 1.25V for 1GHZ */ value = 0x5e; - i2c_write(0x48, 0x2e, 1, &value, 1); + do { + if (0 != i2c_write(0x48, 0x2e, 1, &value, 1)) { + printf("da9052_i2c_is_connected - i2c write failed.....\n"); + } else { + printf("da9052_i2c_is_connected - i2c write success....\n"); + ret = 0; + } + } while (ret != 0 && retries--); i2c_read(0x48, 60, 1, &value, 1); value |= 0x1; i2c_write(0x48, 60, 1, &value, 1); diff --git a/board/freescale/mx53_smd/mx53_smd.c b/board/freescale/mx53_smd/mx53_smd.c index b698fd3..b9bd250 100644 --- a/board/freescale/mx53_smd/mx53_smd.c +++ b/board/freescale/mx53_smd/mx53_smd.c @@ -408,10 +408,19 @@ static void setup_i2c(unsigned int module_base) void setup_pmic_voltages(void) { uchar value; + int retries = 10, ret = -1; + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* increase VDDGP as 1.25V for 1GHZ */ value = 0x5e; - i2c_write(0x48, 0x2e, 1, &value, 1); + do { + if (0 != i2c_write(0x48, 0x2e, 1, &value, 1)) { + printf("da9052_i2c_is_connected - i2c write failed.....\n"); + } else { + printf("da9052_i2c_is_connected - i2c write success....\n"); + ret = 0; + } + } while (ret != 0 && retries--); i2c_read(0x48, 60, 1, &value, 1); value |= 0x1; i2c_write(0x48, 60, 1, &value, 1); -- cgit v1.1