From 2c537642e98969e1810c6fdeff3099584f674a66 Mon Sep 17 00:00:00 2001
From: tang yuantian <Yuantian.Tang@freescale.com>
Date: Thu, 18 Dec 2014 09:55:07 +0800
Subject: mpc85xx/t102xqds: convert deep sleep to generic board interface

A new deep sleep interface is introduced to support generic
board structure. Converts it to use new interface.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---
 board/freescale/t102xqds/ddr.c      | 19 +++++++++++++++++++
 board/freescale/t102xqds/t102xqds.c | 23 +++++++++++------------
 2 files changed, 30 insertions(+), 12 deletions(-)

(limited to 'board/freescale/t102xqds')

diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c
index 46fc64e..2d4d10f 100644
--- a/board/freescale/t102xqds/ddr.c
+++ b/board/freescale/t102xqds/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -152,6 +153,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -166,5 +180,10 @@ phys_size_t initdram(int board_type)
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c
index f3141b5..708afca 100644
--- a/board/freescale/t102xqds/t102xqds.c
+++ b/board/freescale/t102xqds/t102xqds.c
@@ -19,10 +19,10 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 #include "../common/qixis.h"
 #include "t102xqds.h"
 #include "t102xqds_qixis.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -395,14 +405,3 @@ void qixis_dump_switch(void)
 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 	}
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
-- 
cgit v1.1