From e222b1f36fedb0363dbc21e0add7dc3848bae553 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Tue, 14 Jan 2014 11:34:26 +0530 Subject: powerpc/mpc85xx:Increase binary size for P, B & T series boards. u-boot binary size for Freescale mpc85xx platforms is 512KB. This has been reached to upper limit for some of the platforms causig linker error. So, Increase the u-boot binary size to 768KB. Signed-off-by: York Sun Signed-off-by: Prabhakar Kushwaha --- board/freescale/p2041rdb/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'board/freescale/p2041rdb/README') diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README index 292d0d3..9b5539f 100644 --- a/board/freescale/p2041rdb/README +++ b/board/freescale/p2041rdb/README @@ -18,8 +18,8 @@ Boot from NOR flash 2. Program image => tftp 1000000 u-boot.bin => protect off all - => erase eff80000 efffffff - => cp.b 1000000 eff80000 80000 + => erase eff40000 efffffff + => cp.b 1000000 eff40000 c0000 3. Program RCW => tftp 1000000 rcw.bin @@ -30,8 +30,8 @@ Boot from NOR flash 4. Program FMAN Firmware ucode => tftp 1000000 ucode.bin => protect off all - => erase ef000000 ef0fffff - => cp.b 1000000 ef000000 2000 + => erase eff00000 eff3ffff + => cp.b 1000000 eff00000 2000 5. Change DIP-switch SW1[1-5] = 10110 @@ -50,11 +50,11 @@ Boot from SDCard 3. Program the PBL image to SDCard => tftp 1000000 pbl_sd.bin => mmcinfo - => mmc write 1000000 8 441 + => mmc write 1000000 8 672 4. Program FMAN Firmware ucode => tftp 1000000 ucode.bin - => mmc write 1000000 46a 10 + => mmc write 1000000 690 10 5. Change DIP-switch SW1[1-5] = 01100 -- cgit v1.1