From a187559e3d586891c917279044c5386d1b2adc6e Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Fri, 5 Feb 2016 19:30:11 -0800 Subject: Use correct spelling of "U-Boot" Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang --- board/freescale/p1010rdb/README.P1010RDB-PA | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'board/freescale/p1010rdb/README.P1010RDB-PA') diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index cde246d..105942f 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM instead of to CAN/UART1. -Build and burn u-boot to NOR flash +Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]: 1 - boot from lower 4 sectors -Build and burn u-boot to NAND flash +Build and burn U-Boot to NAND flash =================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. -Build and burn u-boot to SPI flash +Build and burn U-Boot to SPI flash ================================== 1. Build u-boot-spi.bin image make P1010RDB_SPIFLASH_config; make -- cgit v1.1