From bba1b6cf15d9571e55f34a4af09c2639fd05b6dc Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Sat, 8 Oct 2011 11:00:22 +0200 Subject: MX5: mx53evk: use new pmic driver Switch to new pmic generic driver. Signed-off-by: Stefano Babic CC: Jason Liu Acked-by: Jason Liu --- board/freescale/mx53evk/mx53evk.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'board/freescale/mx53evk/mx53evk.c') diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index fd821c0..eab9c5f 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -124,12 +125,16 @@ static void setup_i2c(unsigned int port_number) void power_init(void) { unsigned int val; + struct pmic *p; + + pmic_init(); + p = get_pmic(); /* Set VDDA to 1.25V */ - val = pmic_reg_read(REG_SW_2); + pmic_reg_read(p, REG_SW_2, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_25; - pmic_reg_write(REG_SW_2, val); + pmic_reg_write(p, REG_SW_2, val); /* * Need increase VCC and VDDA to 1.3V @@ -137,16 +142,16 @@ void power_init(void) */ if (is_soc_rev(CHIP_REV_2_0) == 0) { /* Set VCC to 1.3V for TO2 */ - val = pmic_reg_read(REG_SW_1); + pmic_reg_read(p, REG_SW_1, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_30; - pmic_reg_write(REG_SW_1, val); + pmic_reg_write(p, REG_SW_1, val); /* Set VDDA to 1.3V for TO2 */ - val = pmic_reg_read(REG_SW_2); + pmic_reg_read(p, REG_SW_2, &val); val &= ~SWX_OUT_MASK; val |= SWX_OUT_1_30; - pmic_reg_write(REG_SW_2, val); + pmic_reg_write(p, REG_SW_2, val); } } -- cgit v1.1