From e7ee23ec1788d8cf269a4cf6b9cd3722cbc7d592 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 17 Jul 2009 10:14:45 -0500 Subject: 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match the 86xx user's manual and other Freescale architectures Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'board/freescale/mpc8610hpcd/mpc8610hpcd.c') diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index a85ebea..419b2c1 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -154,7 +154,7 @@ phys_size_t fixed_sdram(void) ddr->timing_cfg_0 = 0x00260802; ddr->timing_cfg_1 = 0x3935d322; ddr->timing_cfg_2 = 0x14904cc8; - ddr->sdram_mode_1 = 0x00480432; + ddr->sdram_mode = 0x00480432; ddr->sdram_mode_2 = 0x00000000; ddr->sdram_interval = 0x06180fff; /* 0x06180100; */ ddr->sdram_data_init = 0xDEADBEEF; @@ -170,7 +170,7 @@ phys_size_t fixed_sdram(void) udelay(500); - ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/ + ddr->sdram_cfg = 0xc3000000; /* 0xe3008000;*/ #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -- cgit v1.1 From 048e7efe91f66094f868281c12e488ce2bae8976 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 22 Jul 2009 10:12:39 -0500 Subject: 85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards The pixis code used in8/out8 all over the place. Replace it with in_8/out_8 macros. Signed-off-by: Kumar Gala --- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'board/freescale/mpc8610hpcd/mpc8610hpcd.c') diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 419b2c1..2ac169b 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -55,16 +55,17 @@ int board_early_init_f(void) int misc_init_r(void) { u8 tmp_val, version; + u8 *pixis_base = (u8 *)PIXIS_BASE; /*Do not use 8259PIC*/ - tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0); - out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80); + tmp_val = in_8(pixis_base + PIXIS_BRDCFG0); + out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x80); /*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/ - version = in8(PIXIS_BASE + PIXIS_PVER); + version = in_8(pixis_base + PIXIS_PVER); if(version >= 0x07) { - tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0); - out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf); + tmp_val = in_8(pixis_base + PIXIS_BRDCFG0); + out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xbf); } /* Using this for DIU init before the driver in linux takes over @@ -96,11 +97,12 @@ int checkboard(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; + u8 *pixis_base = (u8 *)PIXIS_BASE; printf ("Board: MPC8610HPCD, System ID: 0x%02x, " "System Version: 0x%02x, FPGA Version: 0x%02x\n", - in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), - in8(PIXIS_BASE + PIXIS_PVER)); + in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), + in_8(pixis_base + PIXIS_PVER)); mcm->abcr |= 0x00010000; /* 0 */ mcm->hpmr3 = 0x80000008; /* 4c */ @@ -438,10 +440,9 @@ get_board_sys_clk(ulong dummy) { u8 i; ulong val = 0; - ulong a; + u8 *pixis_base = (u8 *)PIXIS_BASE; - a = PIXIS_BASE + PIXIS_SPD; - i = in8(a); + i = in_8(pixis_base + PIXIS_SPD); i &= 0x07; switch (i) { @@ -481,7 +482,9 @@ int board_eth_init(bd_t *bis) void board_reset(void) { - out8(PIXIS_BASE + PIXIS_RST, 0); + u8 *pixis_base = (u8 *)PIXIS_BASE; + + out_8(pixis_base + PIXIS_RST, 0); while (1) ; -- cgit v1.1