From 9d044fcb8c4558d7ec28089375d2de565bfd2619 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Fri, 3 Jun 2016 18:41:34 +0530 Subject: armv8: ls1012a: Add support of ls1012aqds board QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson Signed-off-by: Pratiyush Mohan Srivastava Signed-off-by: Abhimanyu Saini Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- board/freescale/ls1012aqds/README | 59 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 board/freescale/ls1012aqds/README (limited to 'board/freescale/ls1012aqds/README') diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README new file mode 100644 index 0000000..dee4b30 --- /dev/null +++ b/board/freescale/ls1012aqds/README @@ -0,0 +1,59 @@ +Overview +-------- +QorIQ LS1012A Development System (LS1012AQDS) is a high-performance +development platform, with a complete debugging environment. +The LS1012AQDS board supports the QorIQ LS1012A processor and is +optimized to support the high-bandwidth DDR3L memory and +a full complement of high-speed SerDes ports. + +LS1012A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A +SoC overview. + +LS1012AQDS board Overview +----------------------- + - SERDES Connections, 4 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - SATA 3.0 + - DDR Controller + - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s + - QSPI Controller + - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select + signals to QSPI NOR flash memory (2 virtual banks) and the QSPI + emulator + - USB 3.0 + - One USB 3.0 controller with integrated PHY + - One high-speed USB 3.0 port + - USB 2.0 + - One USB 2.0 controller with ULPI interface + - Two enhanced secure digital host controllers: + - SDHC1 controller can be connected to onboard SDHC connector + - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices + - 2 I2C controllers + - One SATA onboard connectors + - UART + - 5 SAI + - One SAI port with audio codec SGTL5000: + • Provides MIC bias + • Provides headphone and line output + - One SAI port terminated at 2x6 header + - Three SAI Tx/Rx ports terminated at 2x3 headers + - ARM JTAG support + +Booting Options +--------------- +a) QSPI Flash Emu Boot +b) QSPI Flash 1 +c) QSPI Flash 2 + +QSPI flash map +-------------- +Images | Size |QSPI Flash Address +------------------------------------------ +RCW + PBI | 1MB | 0x4000_0000 +U-boot | 1MB | 0x4010_0000 +U-boot Env | 1MB | 0x4020_0000 +PPA FIT image | 2MB | 0x4050_0000 +Linux ITB | ~53MB | 0x40A0_0000 -- cgit v1.1