From 7a56f1791d84bb0fbd4e40bb6731915cc5ff6251 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Apr 2013 08:33:26 +0000 Subject: imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz. CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c from the mainline kernel. mx6q_4x_mt41j128.cfg is also used by mx6qsabresd, and it is safe to use it for this board as well. Signed-off-by: Fabio Estevam --- board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'board/freescale/imx/ddr') diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index f4cae5e..996d788 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -172,3 +172,14 @@ DATA 4 0x020e0010 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb -- cgit v1.1