From c4930b1a0ee5a35c49de10e0289f9c8253e78848 Mon Sep 17 00:00:00 2001 From: Shaveta Leekha Date: Wed, 26 Feb 2014 16:07:51 +0530 Subject: B4860qds: Set SerDes2 refclk2 at to 156.25MHz for XFI to work Change setting of SerDes2 refclk2 to have the default value as it is coming on board that is 156.25MHz, for XFI to work. Also change PLL_NUM variable to the one defined in config_mpc85xx.h for B4860 and B4420. Signed-off-by: Shaveta Leekha Reviewed-by: York Sun --- board/freescale/b4860qds/b4860qds.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'board/freescale/b4860qds/b4860qds.c') diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 25b3be8..24a709e 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -29,7 +29,6 @@ #define CLK_MUX_SEL_MASK 0x4 #define ETH_PHY_CLK_OUT 0x4 -#define PLL_NUM 2 DECLARE_GLOBAL_DATA_PTR; @@ -386,7 +385,7 @@ int config_serdes1_refclks(void) /* Steps For SerDes PLLs reset and reconfiguration after * changing SerDes's refclks */ - for (i = 0; i < PLL_NUM; i++) { + for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { debug("For PLL%d reset and reconfiguration after" " changing refclks\n", i+1); clrbits_be32(&srds_regs->bank[i].rstctl, @@ -453,7 +452,7 @@ int config_serdes2_refclks(void) if (!ret) { ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2, SERDES_REFCLK_100, - SERDES_REFCLK_100, 0); + SERDES_REFCLK_156_25, 0); if (ret) { printf("IDT8T49N222A configuration failed.\n"); goto out; @@ -467,7 +466,7 @@ int config_serdes2_refclks(void) /* Steps For SerDes PLLs reset and reconfiguration after * changing SerDes's refclks */ - for (i = 0; i < PLL_NUM; i++) { + for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { clrbits_be32(&srds2_regs->bank[i].rstctl, SRDS_RSTCTL_SDRST_B); udelay(10); -- cgit v1.1