From d1c3b27525b664e8c4db6bb173eed51bfc8220de Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 9 Sep 2009 16:25:29 +0200
Subject: ppc4xx: Big cleanup of PPC4xx defines

This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 board/esd/apc405/apc405.c     | 26 ++++++++---------
 board/esd/ar405/flash.c       |  8 +++---
 board/esd/ash405/ash405.c     |  2 +-
 board/esd/ash405/flash.c      |  8 +++---
 board/esd/canbt/canbt.c       |  8 +++---
 board/esd/canbt/flash.c       | 10 +++----
 board/esd/cms700/cms700.c     |  2 +-
 board/esd/cms700/flash.c      |  8 +++---
 board/esd/cpci2dp/cpci2dp.c   | 12 ++++----
 board/esd/cpci2dp/flash.c     | 10 +++----
 board/esd/cpci405/cpci405.c   | 22 +++++++--------
 board/esd/cpci405/flash.c     | 20 ++++++-------
 board/esd/cpciiser4/flash.c   | 10 +++----
 board/esd/dp405/dp405.c       |  2 +-
 board/esd/dp405/flash.c       |  8 +++---
 board/esd/du405/du405.c       |  8 +++---
 board/esd/du405/flash.c       | 20 ++++++-------
 board/esd/du440/du440.c       | 56 ++++++++++++++++++------------------
 board/esd/hh405/flash.c       |  8 +++---
 board/esd/hh405/hh405.c       |  2 +-
 board/esd/hub405/flash.c      |  8 +++---
 board/esd/hub405/hub405.c     |  2 +-
 board/esd/ocrtc/flash.c       | 20 ++++++-------
 board/esd/ocrtc/ocrtc.c       |  2 +-
 board/esd/pci405/flash.c      |  8 +++---
 board/esd/pci405/pci405.c     | 28 +++++++++---------
 board/esd/plu405/flash.c      |  8 +++---
 board/esd/plu405/plu405.c     |  2 +-
 board/esd/pmc405/pmc405.c     |  6 ++--
 board/esd/pmc405de/pmc405de.c |  2 +-
 board/esd/pmc440/pmc440.c     | 66 +++++++++++++++++++++----------------------
 board/esd/voh405/flash.c      |  8 +++---
 board/esd/voh405/voh405.c     |  2 +-
 board/esd/vom405/flash.c      |  8 +++---
 board/esd/vom405/vom405.c     |  2 +-
 board/esd/wuh405/flash.c      |  8 +++---
 board/esd/wuh405/wuh405.c     |  2 +-
 37 files changed, 216 insertions(+), 216 deletions(-)

(limited to 'board/esd')

diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index 5a02155..46622a2 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -92,7 +92,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
 
 int board_revision(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
@@ -100,8 +100,8 @@ int board_revision(void)
 	 */
 
 	/* Setup GPIO pins (CS2/GPIO11, CS3/GPIO12 and CS4/GPIO13 as GPIO) */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03800000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03800000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x001c0000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x001c0000);
 
@@ -113,7 +113,7 @@ int board_revision(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x001c0000:
@@ -166,7 +166,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * New boards have a single 32MB flash connected to CS0
@@ -174,12 +174,12 @@ int board_early_init_f (void)
 	 */
 	if (board_revision() >= 8) {
 		/* disable CS1 */
-		mtebc(pb1ap, 0);
-		mtebc(pb1cr, 0);
+		mtebc(PB1AP, 0);
+		mtebc(PB1CR, 0);
 
 		/* resize CS0 to 32MB */
-		mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP_HWREV8);
-		mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR_HWREV8);
+		mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP_HWREV8);
+		mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR_HWREV8);
 	}
 
 	return 0;
@@ -209,7 +209,7 @@ int misc_init_r(void)
 	int status;
 	int index;
 	int i;
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	char *str;
 	uchar *logo_addr;
 	ulong logo_size;
@@ -219,8 +219,8 @@ int misc_init_r(void)
 	/*
 	 * Setup GPIO pins (CS6+CS7 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
@@ -265,7 +265,7 @@ int misc_init_r(void)
 	}
 
 	/* restore gpio/cs settings */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	puts("FPGA:  ");
 
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/ar405/flash.c
+++ b/board/esd/ar405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 074fe08..8da08fa 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -77,7 +77,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/ash405/flash.c b/board/esd/ash405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/ash405/flash.c
+++ b/board/esd/ash405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
index 2fe6b7b..418d3e2 100644
--- a/board/esd/canbt/canbt.c
+++ b/board/esd/canbt/canbt.c
@@ -52,16 +52,16 @@ const unsigned char fpgadata[] = {
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	int index, len, i;
 	int status;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff;
-	cntrl0Reg |= 0x0070f000;
-	mtdcr (cntrl0, cntrl0Reg);
+	CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff;
+	CPC0_CR0Reg |= 0x0070f000;
+	mtdcr (CPC0_CR0, CPC0_CR0Reg);
 
 #ifdef FPGA_DEBUG
 	/* set up serial port with default baudrate */
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/canbt/flash.c
+++ b/board/esd/canbt/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 01b1223..7a92401 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -56,7 +56,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/cms700/flash.c
+++ b/board/esd/cms700/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index cd57ed4..00c7024 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -31,13 +31,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg |
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg |
 	      ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED |
 		CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
@@ -72,7 +72,7 @@ int board_early_init_f (void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -81,8 +81,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return (0);
 }
diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/cpci2dp/flash.c
+++ b/board/esd/cpci2dp/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index a677c62..4c9ed2f 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -214,7 +214,7 @@ int ctermm2(void)
 
 int cpci405_host(void)
 {
-	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
 		return -1;		/* yes, board is cpci405 host */
 	else
 		return 0;		/* no, board is cpci405 adapter */
@@ -222,14 +222,14 @@ int cpci405_host(void)
 
 int cpci405_version(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
 	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
 	udelay(1000); /* wait some time before reading input */
@@ -238,7 +238,7 @@ int cpci405_version(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x00180000:
@@ -261,7 +261,7 @@ int cpci405_version(void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -283,8 +283,8 @@ int misc_init_r (void)
 		/*
 		 * Setup GPIO pins (CS6+CS7 as GPIO)
 		 */
-		cntrl0Reg = mfdcr(cntrl0);
-		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+		CPC0_CR0Reg = mfdcr(CPC0_CR0);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 		if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
@@ -330,7 +330,7 @@ int misc_init_r (void)
 		}
 
 		/* restore gpio/cs settings */
-		mtdcr(cntrl0, cntrl0Reg);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 		puts("FPGA:  ");
 
@@ -400,8 +400,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return 0;
 }
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index d535924..4fcf174 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -91,13 +91,13 @@ unsigned long flash_init (void)
 			size_b1 = 1 << 20;
 		}
 		base_b1 = -size_b1;
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (calc_size(size_b1) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b1=%x base_b1=%x pb1cr = %x\n",
+		printf("size_b1=%x base_b1=%x PB1CR = %x\n",
 		       size_b1, base_b1, pbcr); /* test-only */
 #endif
 	}
@@ -108,13 +108,13 @@ unsigned long flash_init (void)
 			size_b0 = 1 << 20;
 		}
 		base_b0 = base_b1 - size_b0;
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (calc_size(size_b0) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b0=%x base_b0=%x pb0cr = %x\n",
+		printf("size_b0=%x base_b0=%x PB0CR = %x\n",
 		       size_b0, base_b0, pbcr); /* test-only */
 #endif
 	}
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/cpciiser4/flash.c
+++ b/board/esd/cpciiser4/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index e52d37b..fc0d091 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -54,7 +54,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO13 (CS4) pin
diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 8e9ac28..28a50c7 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -135,7 +135,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 100 us
 	 */
-	mtebc (epcr, 0xb8400000);
+	mtebc (EBC0_CFG, 0xb8400000);
 
 	return 0;
 }
@@ -143,13 +143,13 @@ int board_early_init_f (void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * Setup UART1 handshaking: use CTS instead of DSR
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return (0);
 }
diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c
index 240aa09..c62c6a9 100644
--- a/board/esd/du405/flash.c
+++ b/board/esd/du405/flash.c
@@ -67,25 +67,25 @@ unsigned long flash_init (void)
 	/* Re-do sizing to get full correct info */
 
 	if (size_b1) {
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		pbcr = (pbcr & 0x0001ffff) | base_b1 |
 				(((size_b1 / 1024 / 1024) - 1) << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*          printf("PB1CR = %x\n", pbcr); */
 	}
 
 	if (size_b0) {
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		pbcr = (pbcr & 0x0001ffff) | base_b0 |
 				(((size_b0 / 1024 / 1024) - 1) << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*            printf("PB0CR = %x\n", pbcr); */
 	}
 
 	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 0ec519b..376de98 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -45,8 +45,8 @@ int board_early_init_f(void)
 	u32 sdr0_pfc1, sdr0_pfc2;
 	u32 reg;
 
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xb8400000);
 
 	/*
 	 * Setup the GPIO pins
@@ -145,8 +145,8 @@ int board_early_init_f(void)
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
 	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);
 
 	/* setup NAND FLASH */
 	mfsdr(SDR0_CUST0, sdr0_cust0);
@@ -176,12 +176,12 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -265,8 +265,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 	/*
 	 * release IO-RST#
@@ -380,35 +380,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
diff --git a/board/esd/hh405/flash.c b/board/esd/hh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/hh405/flash.c
+++ b/board/esd/hh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 5ae4c75..b72b716 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -374,7 +374,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 03e5ad7..acb23da 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -97,7 +97,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
index e763a89..eda7c57 100644
--- a/board/esd/ocrtc/flash.c
+++ b/board/esd/ocrtc/flash.c
@@ -68,9 +68,9 @@ unsigned long flash_init (void)
 	/* Re-do sizing to get full correct info */
 
 	if (size_b1) {
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		switch (size_b1) {
 		case 1 << 20:
@@ -90,14 +90,14 @@ unsigned long flash_init (void)
 			break;
 		}
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*          printf("PB1CR = %x\n", pbcr); */
 	}
 
 	if (size_b0) {
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		switch (size_b1) {
 		case 1 << 20:
@@ -117,8 +117,8 @@ unsigned long flash_init (void)
 			break;
 		}
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*            printf("PB0CR = %x\n", pbcr); */
 	}
 
 	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
index 35bfa95..709bcdd 100644
--- a/board/esd/ocrtc/ocrtc.c
+++ b/board/esd/ocrtc/ocrtc.c
@@ -57,7 +57,7 @@ int board_early_init_f (void)
 	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
 	 * transfers, set device-paced timeout to 256 cycles
 	 */
-	mtebc (epcr, 0x20400000);
+	mtebc (EBC0_CFG, 0x20400000);
 
 	return 0;
 }
diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c
index 9058483..67a7bb5 100644
--- a/board/esd/pci405/flash.c
+++ b/board/esd/pci405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 56184ca..04bc569 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -67,7 +67,7 @@ const unsigned char fpgadata[] =
 
 int board_revision(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
@@ -77,8 +77,8 @@ int board_revision(void)
 	/*
 	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
 	udelay(1000);                   /* wait some time before reading input */
@@ -87,7 +87,7 @@ int board_revision(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x00100200:
@@ -133,7 +133,7 @@ unsigned long fpga_init_state(void)
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
@@ -166,18 +166,18 @@ int board_early_init_f (void)
 	/*
 	 * Setup GPIO pins (IRQ4/GPIO21 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00008000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00008000);
 
 	/*
 	 * Setup GPIO pins (CS6+CS7 as GPIO)
 	 */
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 25 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
@@ -282,11 +282,11 @@ int misc_init_r (void)
 #define PCI0_BRDGOPT1 0x4a
 	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
 
-#define plb0_acr      0x87
+#define PLB0_ACR      0x87
 	/*
 	 * Enable fairness and high bus utilization
 	 */
-	mtdcr(plb0_acr, 0x98000000);
+	mtdcr(PLB0_ACR, 0x98000000);
 
 	free(dst);
 	return (0);
@@ -313,14 +313,14 @@ int checkboard (void)
 	printf(" (Rev 1.%ld", gd->board_type);
 
 	if (gd->board_type >= 2) {
-		unsigned long cntrl0Reg;
+		unsigned long CPC0_CR0Reg;
 		unsigned long value;
 
 		/*
 		 * Setup GPIO pins (Trace/GPIO1 to GPIO)
 		 */
-		cntrl0Reg = mfdcr(cntrl0);
-		mtdcr(cntrl0, cntrl0Reg & ~0x08000000);
+		CPC0_CR0Reg = mfdcr(CPC0_CR0);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg & ~0x08000000);
 		out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
 		out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
 		udelay(1000);                   /* wait some time before reading input */
diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index e41545a..a3c1cec 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -90,7 +90,7 @@ int board_early_init_f(void)
 	 * EBC Configuration Register: set ready timeout to
 	 * 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index 192a642..5ff87e7 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -60,12 +60,12 @@ int board_early_init_f (void)
 	 * EBC Configuration Register:
 	 * set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000);
+	mtebc (EBC0_CFG, 0xa8400000);
 
 	/*
 	 * Setup GPIO pins
 	 */
-	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT |
+	mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT |
 					CONFIG_SYS_FPGA_DONE |
 					CONFIG_SYS_XEREADY |
 					CONFIG_SYS_NONMONARCH |
@@ -73,7 +73,7 @@ int board_early_init_f (void)
 
 	if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
 		/* rev 1.2 boards */
-		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE |
+		mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE |
 						CONFIG_SYS_SELF_RST) << 5));
 	}
 
diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c
index f68e1b5..419311a 100644
--- a/board/esd/pmc405de/pmc405de.c
+++ b/board/esd/pmc405de/pmc405de.c
@@ -127,7 +127,7 @@ int board_early_init_f(void)
 	 * - set ready timeout to 512 ebc-clks -> ca. 15 us
 	 * - EBC lines are always driven
 	 */
-	mtebc(epcr, 0xa8400000);
+	mtebc(EBC0_CFG, 0xa8400000);
 
 	return 0;
 }
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index f22a1c2..119cbf2 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -64,7 +64,7 @@ struct serial_device *default_serial_console(void)
 	 * Use default console on P4 when strapping jumper
 	 * is installed (bootstrap option != 'H').
 	 */
-	mfsdr(SDR_PINSTP, val);
+	mfsdr(SDR0_PINSTP, val);
 	if (((val & 0xf0000000) >> 29) != 7)
 		return &serial1_device;
 
@@ -100,8 +100,8 @@ int board_early_init_f(void)
 	u32 reg;
 
 	/* general EBC configuration (disable EBC timeouts) */
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xf8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xf8400000);
 
 	/*
 	 * Setup the GPIO pins
@@ -134,13 +134,13 @@ int board_early_init_f(void)
 	out_be32((void *)GPIO1_ISR3H, 0x00000000);
 
 	/* patch PLB:PCI divider for 66MHz PCI */
-	mfcpr(clk_spcid, reg);
+	mfcpr(CPR0_SPCID, reg);
 	if (pci_is_66mhz() && (reg != 0x02000000)) {
-		mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
+		mtcpr(CPR0_SPCID, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
 
-		mfcpr(clk_icfg, reg);
+		mfcpr(CPR0_ICFG, reg);
 		reg |= CPR0_ICFG_RLI_MASK;
-		mtcpr(clk_icfg, reg);
+		mtcpr(CPR0_ICFG, reg);
 
 		mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */
 	}
@@ -240,19 +240,19 @@ int misc_init_r(void)
 	gd->bd->bi_flashoffset = 0;
 
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb2cr);
+	mtdcr(EBC0_CFGADDR, PB2CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	pbcr = mfdcr(ebccfgd);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb2cr);
+	mtdcr(EBC0_CFGADDR, PB2CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -424,8 +424,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 #ifdef CONFIG_FPGA
 	pmc440_init_fpga();
@@ -507,35 +507,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 #ifdef CONFIG_PCI_PNP
 	hose->fixup_irq = pmc440_pci_fixup_irq;
diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 9127550..7477f56 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -99,7 +99,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/vom405/flash.c
+++ b/board/esd/vom405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
index a481aca..de9c7b9 100644
--- a/board/esd/vom405/vom405.c
+++ b/board/esd/vom405/vom405.c
@@ -56,7 +56,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
diff --git a/board/esd/wuh405/flash.c b/board/esd/wuh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/wuh405/flash.c
+++ b/board/esd/wuh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c
index e330fff..e86f1d0 100644
--- a/board/esd/wuh405/wuh405.c
+++ b/board/esd/wuh405/wuh405.c
@@ -75,7 +75,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
-- 
cgit v1.1