From 807db88b62ff513e5c6a4001931d14191e710ce0 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 12 Jan 2015 22:47:27 +0100 Subject: ppc4xx: remove VOH405 board Signed-off-by: Matthias Fuchs --- board/esd/voh405/Kconfig | 12 - board/esd/voh405/MAINTAINERS | 6 - board/esd/voh405/Makefile | 10 - board/esd/voh405/flash.c | 85 - board/esd/voh405/fpgadata.c | 4021 --------------------------------- board/esd/voh405/logo_320_240_4bpp.c | 153 -- board/esd/voh405/logo_640_480_24bpp.c | 3443 ---------------------------- board/esd/voh405/voh405.c | 377 ---- 8 files changed, 8107 deletions(-) delete mode 100644 board/esd/voh405/Kconfig delete mode 100644 board/esd/voh405/MAINTAINERS delete mode 100644 board/esd/voh405/Makefile delete mode 100644 board/esd/voh405/flash.c delete mode 100644 board/esd/voh405/fpgadata.c delete mode 100644 board/esd/voh405/logo_320_240_4bpp.c delete mode 100644 board/esd/voh405/logo_640_480_24bpp.c delete mode 100644 board/esd/voh405/voh405.c (limited to 'board/esd') diff --git a/board/esd/voh405/Kconfig b/board/esd/voh405/Kconfig deleted file mode 100644 index d9fe9d2..0000000 --- a/board/esd/voh405/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_VOH405 - -config SYS_BOARD - default "voh405" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "VOH405" - -endif diff --git a/board/esd/voh405/MAINTAINERS b/board/esd/voh405/MAINTAINERS deleted file mode 100644 index 0039f5d..0000000 --- a/board/esd/voh405/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -VOH405 BOARD -M: Matthias Fuchs -S: Maintained -F: board/esd/voh405/ -F: include/configs/VOH405.h -F: configs/VOH405_defconfig diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile deleted file mode 100644 index 3d82399..0000000 --- a/board/esd/voh405/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = voh405.o flash.o \ - ../common/misc.o \ - ../common/esd405ep_nand.o \ diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c deleted file mode 100644 index 23e8164..0000000 --- a/board/esd/voh405/flash.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static void flash_get_offsets (ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - int size_val = 0; - - /* Init: no FLASHes known */ - for (i=0; i -#include -#include -#include -#include - -/* ------------------------------------------------------------------------- */ - -#if 0 -#define FPGA_DEBUG -#endif - -extern void lxt971_no_sleep(void); - -/* fpga configuration data - gzip compressed and generated by bin2c */ -const unsigned char fpgadata[] = -{ -#include "fpgadata.c" -}; - -/* - * include common fpga code (for esd boards) - */ -#include "../common/fpga.c" - - -/* logo bitmap data - gzip compressed and generated by bin2c */ -unsigned char logo_bmp_320[] = -{ -#include "logo_320_240_4bpp.c" -}; - -unsigned char logo_bmp_640[] = -{ -#include "logo_640_480_24bpp.c" -}; - - -/* - * include common lcd code (for esd boards) - */ -#include "../common/lcd.c" - -#include "../common/s1d13704_320_240_4bpp.h" -#include "../common/s1d13806_320_240_4bpp.h" -#include "../common/s1d13806_640_480_16bpp.h" - - -int board_early_init_f (void) -{ - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive - * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive - * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive - * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ - mtdcr(UIC0PR, 0xFFFFFFB5); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us - */ - mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ - - return 0; -} - -int misc_init_r (void) -{ - unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); - unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); - unsigned short *lcd_contrast = - (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4); - unsigned short *lcd_backlight = - (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6); - unsigned char *dst; - ulong len = sizeof(fpgadata); - int status; - int index; - int i; - char *str; - - dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); - if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { - printf ("GUNZIP ERROR - must RESET board to recover\n"); - do_reset (NULL, 0, 0, NULL); - } - - status = fpga_boot(dst, len); - if (status != 0) { - printf("\nFPGA: Booting failed "); - switch (status) { - case ERROR_FPGA_PRG_INIT_LOW: - printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_INIT_HIGH: - printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_DONE: - printf("(Timeout: DONE not high after programming FPGA)\n "); - break; - } - - /* display infos on fpgaimage */ - index = 15; - for (i=0; i<4; i++) { - len = dst[index]; - printf("FPGA: %s\n", &(dst[index+1])); - index += len+3; - } - putc ('\n'); - /* delayed reboot */ - for (i=20; i>0; i--) { - printf("Rebooting in %2d seconds \r",i); - for (index=0;index<1000;index++) - udelay(1000); - } - putc ('\n'); - do_reset(NULL, 0, 0, NULL); - } - - puts("FPGA: "); - - /* display infos on fpgaimage */ - index = 15; - for (i=0; i<4; i++) { - len = dst[index]; - printf("%s ", &(dst[index+1])); - index += len+3; - } - putc ('\n'); - - free(dst); - - /* - * Reset FPGA via FPGA_INIT pin - */ - out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~FPGA_INIT); /* reset low */ - udelay(1000); /* wait 1ms */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | FPGA_INIT); /* reset high */ - udelay(1000); /* wait 1ms */ - - /* - * Reset external DUARTs - */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */ - udelay(10); /* wait 10us */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */ - udelay(1000); /* wait 1ms */ - - /* - * Set NAND-FLASH GPIO signals to default - */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE)); - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE); - - /* - * Setup EEPROM write protection - */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP); - - /* - * Enable interrupts in exar duart mcr[3] - */ - out_8(duart0_mcr, 0x08); - out_8(duart1_mcr, 0x08); - - /* - * Init lcd interface and display logo - */ - str = getenv("bd_type"); - if (strcmp(str, "voh405_bw") == 0) { - lcd_setup(0, 1); - lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM, - regs_13704_320_240_4bpp, - sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]), - logo_bmp_320, sizeof(logo_bmp_320)); - } else if (strcmp(str, "voh405_bwbw") == 0) { - lcd_setup(0, 1); - lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM, - regs_13704_320_240_4bpp, - sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]), - logo_bmp_320, sizeof(logo_bmp_320)); - lcd_setup(1, 1); - lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM, - regs_13806_320_240_4bpp, - sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]), - logo_bmp_320, sizeof(logo_bmp_320)); - } else if (strcmp(str, "voh405_bwc") == 0) { - lcd_setup(0, 1); - lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM, - regs_13704_320_240_4bpp, - sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]), - logo_bmp_320, sizeof(logo_bmp_320)); - lcd_setup(1, 0); - lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM, - regs_13806_640_480_16bpp, - sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]), - logo_bmp_640, sizeof(logo_bmp_640)); - } else { - printf("Unsupported bd_type defined (%s) -> No display configured!\n", str); - return 0; - } - - /* - * Set invert bit in small lcd controller - */ - out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2), - in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01); - - /* - * Set default contrast voltage on epson vga controller - */ - out_be16(lcd_contrast, 0x4646); - - /* - * Enable backlight - */ - out_be16(lcd_backlight, 0xffff); - - /* - * Enable external I2C bus - */ - out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON); - - return (0); -} - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char str[64]; - int i = getenv_f("serial#", str, sizeof(str)); - - puts ("Board: "); - - if (i == -1) { - puts ("### No HW ID - assuming VOH405"); - } else { - puts(str); - } - - if (getenv_f("bd_type", str, sizeof(str)) != -1) { - printf(" (%s)", str); - } else { - puts(" (Missing bd_type!)"); - } - - putc ('\n'); - - return 0; -} - -#ifdef CONFIG_IDE_RESET -#define FPGA_MODE (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL) -void ide_set_reset(int on) -{ - /* - * Assert or deassert CompactFlash Reset Pin - */ - if (on) { /* assert RESET */ - out_be16((void *)FPGA_MODE, - in_be16((void *)FPGA_MODE) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET); - } else { /* release RESET */ - out_be16((void *)FPGA_MODE, - in_be16((void *)FPGA_MODE) | CONFIG_SYS_FPGA_CTRL_CF_RESET); - } -} -#endif /* CONFIG_IDE_RESET */ - -#if defined(CONFIG_RESET_PHY_R) -void reset_phy(void) -{ -#ifdef CONFIG_LXT971_NO_SLEEP - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); -#endif -} -#endif - -#if defined(CONFIG_SYS_EEPROM_WREN) -/* Input: I2C address of EEPROM device to enable. - * -1: deliver current state - * 0: disable write - * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done - * 0/1: current state if was -1. - */ -int eeprom_write_enable (unsigned dev_addr, int state) -{ - if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { - return -1; - } else { - switch (state) { - case 1: - /* Enable write access, clear bit GPIO0. */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); - state = 0; - break; - case 0: - /* Disable write access, set bit GPIO0. */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - state = 0; - break; - default: - /* Read current status back. */ - state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP)); - break; - } - } - return state; -} - -int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int query = argc == 1; - int state = 0; - - if (query) { - /* Query write access state. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); - if (state < 0) { - puts ("Query of write access state failed.\n"); - } else { - printf ("Write access for device 0x%0x is %sabled.\n", - CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); - state = 0; - } - } else { - if ('0' == argv[1][0]) { - /* Disable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); - } else { - /* Enable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); - } - if (state < 0) { - puts ("Setup of write access state failed.\n"); - } - } - - return state; -} - -U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - "" -); -#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ -- cgit v1.1