From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/esd/cpci2dp/cpci2dp.c | 28 ++++++++++++++-------------- board/esd/cpci2dp/flash.c | 2 +- 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'board/esd/cpci2dp') diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index 8bc40d5..dcab906 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -36,12 +36,12 @@ int board_early_init_f (void) * Setup GPIO pins */ cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5)); + mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5)); /* set output pins to high */ - out32(GPIO0_OR, CFG_EEPROM_WP); + out32(GPIO0_OR, CONFIG_SYS_EEPROM_WP); /* setup for output (LED=off) */ - out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED); + out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED); /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -108,7 +108,7 @@ int checkboard (void) return 0; } -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) /* Input: I2C address of EEPROM device to enable. * -1: deliver current state * 0: disable write @@ -118,23 +118,23 @@ int checkboard (void) * 0/1: current state if was -1. */ int eeprom_write_enable (unsigned dev_addr, int state) { - if (CFG_I2C_EEPROM_ADDR != dev_addr) { + if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { return -1; } else { switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP)); break; } } @@ -142,7 +142,7 @@ int eeprom_write_enable (unsigned dev_addr, int state) { } #endif -#if defined(CFG_EEPROM_WREN) +#if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int query = argc == 1; @@ -150,21 +150,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (query) { /* Query write access state. */ - state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1); + state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); if (state < 0) { puts ("Query of write access state failed.\n"); } else { printf ("Write access for device 0x%0x is %sabled.\n", - CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); state = 0; } } else { if ('0' == argv[1][0]) { /* Disable write access. */ - state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0); + state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); } else { /* Enable write access. */ - state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1); + state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); } if (state < 0) { puts ("Setup of write access state failed.\n"); @@ -179,4 +179,4 @@ U_BOOT_CMD( "eepwren - Enable / disable / query EEPROM write access\n", NULL ); -#endif /* #if defined(CFG_EEPROM_WREN) */ +#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c index de847f9..56c822e 100644 --- a/board/esd/cpci2dp/flash.c +++ b/board/esd/cpci2dp/flash.c @@ -47,7 +47,7 @@ unsigned long flash_init (void) unsigned long base_b0; /* Init: no FLASHes known */ - for (i=0; i