From bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 2 Jun 2008 17:37:28 +0200 Subject: ppc4xx: Remove superfluous dram_init() call or replace it by initdram() Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese --- board/esd/ar405/ar405.c | 22 ---------------------- 1 file changed, 22 deletions(-) (limited to 'board/esd/ar405/ar405.c') diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index dfead33..3abcfe6 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -190,28 +190,6 @@ int checkboard (void) return 0; } -/* ------------------------------------------------------------------------- */ - -long int initdram (int board_type) -{ - unsigned long val; - - mtdcr(memcfga, mem_mb0cf); - val = mfdcr(memcfgd); - - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); -} - -/* ------------------------------------------------------------------------- */ - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - #if 1 /* test-only: some internal test routines... */ /* -- cgit v1.1