From 97003756249bd790910417eb66f0039bbf06a02c Mon Sep 17 00:00:00 2001 From: Ben Gardiner Date: Mon, 23 Aug 2010 09:08:15 -0400 Subject: da8xx: fixup ARM relocation support Split the existing dram_init for da8xx when ARM reloc is enabled, like the changes to arch/arm/cpu/arm926ejs/orion5x/dram.c in 0f234d263b17ccf1b8fd776eb8c15b7cdb27a887 by Heiko Schocher . Without these changes gd->ram_size is '0' which leads to incorrect relocation when CONFIG_SYS_ARM_WITHOUT_RELOC is defined and the board does not boot. We use get_ram_size to dynamically calculate the available RAM because it runs on different board version with different ram, as suggested by Heiko in private communication. Tested on a da850evm with 128M of DDR2 installed; with both CONFIG_SYS_ARM_WITHOUT_RELOC defined and undefined. Signed-off-by: Ben Gardiner Reviewed-by: Sudhakar Rajashekhara CC: Sudhakar Rajashekhara CC: Heiko Schocher --- board/davinci/common/misc.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'board/davinci/common/misc.c') diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 25ca326..86a875e 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,6 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; @@ -40,6 +41,22 @@ int dram_init(void) return(0); } +#else +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size( + (volatile void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} +#endif #ifdef CONFIG_DRIVER_TI_EMAC -- cgit v1.1