From 82ceba2ca2487c4967419cf7053e1301709219e5 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 16 Mar 2016 08:48:21 +0100 Subject: x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese Cc: Simon Glass Cc: Bin Meng Reviewed-by: Bin Meng --- board/congatec/Kconfig | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 board/congatec/Kconfig (limited to 'board/congatec/Kconfig') diff --git a/board/congatec/Kconfig b/board/congatec/Kconfig new file mode 100644 index 0000000..1dc306e --- /dev/null +++ b/board/congatec/Kconfig @@ -0,0 +1,29 @@ +# +# Copyright (C) 2015, Bin Meng +# +# SPDX-License-Identifier: GPL-2.0+ +# + +if VENDOR_CONGATEC + +choice + prompt "Mainboard model" + optional + +config TARGET_CONGA_QEVAL20_QA3_E3845 + bool "congatec QEVAL 2.0 & conga-QA3/E3845" + help + This is the congatec Qseven 2.0 evaluation carrier board + (conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM. + It contains an Atom E3845 with Ethernet, micro-SD, USB 2, + USB 3, SATA, serial console and HDMI 1.3 video out. + It requires some binary blobs - see README.x86 for details. + + Note that PCIE_ECAM_BASE is set up by the FSP so the value used + by U-Boot matches that value. + +endchoice + +source "board/congatec/conga-qeval20-qa3-e3845/Kconfig" + +endif -- cgit v1.1