From afd7f3d0de7be71ee90478d4dde00dc1a8f9d204 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 3 Nov 2002 01:41:26 +0000 Subject: Initial revision --- board/bmw/early_init.S | 1172 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1172 insertions(+) create mode 100644 board/bmw/early_init.S (limited to 'board/bmw') diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S new file mode 100644 index 0000000..ec20a67 --- /dev/null +++ b/board/bmw/early_init.S @@ -0,0 +1,1172 @@ +#include +#include +#include +#include +#include + +#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */ + + +/* + * Initialize the MMU using BAT entries and hardwired TLB + * This obviates the need for any code in cpu_init_f which + * configures the BAT registers. +*/ +#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */ + .global iommu_setup + /* Initialize IO/MMU mappings via BAT method Ch. 7, + * PPC Programming Reference + */ +iommu_setup: + +/* initialize the BAT registers (SPRs 528 - 543 */ +#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */ +#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */ +#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */ +#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */ +#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */ +#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */ +#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */ +#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */ +#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */ +#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */ +#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */ +#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */ +#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */ +#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */ +#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */ +#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */ + + +/* PowerPC processors do not necessarily initialize the BAT + registers on power-up or reset. So they are in an unknown + state. Before programming the BATs for the first time, all + BAT registers MUST have their Vs and Vp bits cleared in the + upper BAT half in order to avoid possibly having 2 BATs + valid and mapping the same memory region. + + The reason for this is that, even with address translation + disabled, multiple BAT hits for an address are treated as + programming errors and can cause unpredictable results. + + It is up to the software to make sure it never has 2 IBAT + mappings or 2 DBAT mappings that are valid for the same + addresses. It is not necessary to perform this code + sequence every time the BATs are programmed, only when + there is a possibility that there may be overlapping BAT + entries. + + When programming the BATs in non-reset scenarios, even if + you are sure that your new mapping will not temporarily + create overlapping regions, it is still a wise idea to + invalidate a BAT entry by setting its upper BAT register to + all 0's before programming it. This will avoid having a + BAT marked valid that is in an unknown or transient state +*/ + + addis r5,0,0x0000 + mtibat0u(r5) + mtibat0l(r5) + mtibat1u(r5) + mtibat1l(r5) + mtibat2u(r5) + mtibat2l(r5) + mtibat3u(r5) + mtibat3l(r5) + mtdbat0u(r5) + mtdbat0l(r5) + mtdbat1u(r5) + mtdbat1l(r5) + mtdbat2u(r5) + mtdbat2l(r5) + mtdbat3u(r5) + mtdbat3l(r5) + isync + +/* + * Set up I/D BAT0 + */ + lis r4, CFG_DBAT0L@h + ori r4, r4, CFG_DBAT0L@l + lis r3, CFG_DBAT0U@h + ori r3, r3, CFG_DBAT0U@l + + mtdbat0l(r4) + isync + mtdbat0u(r3) + isync + sync + + lis r4, CFG_IBAT0L@h + ori r4, r4, CFG_IBAT0L@l + lis r3, CFG_IBAT0U@h + ori r3, r3, CFG_IBAT0U@l + + isync + mtibat0l(r4) + isync + mtibat0u(r3) + isync + +/* + * Set up I/D BAT1 + */ + lis r4, CFG_IBAT1L@h + ori r4, r4, CFG_IBAT1L@l + lis r3, CFG_IBAT1U@h + ori r3, r3, CFG_IBAT1U@l + + isync + mtibat1l(r4) + isync + mtibat1u(r3) + isync + mtdbat1l(r4) + isync + mtdbat1u(r3) + isync + sync + +/* + * Set up I/D BAT2 + */ + lis r4, CFG_IBAT2L@h + ori r4, r4, CFG_IBAT2L@l + lis r3, CFG_IBAT2U@h + ori r3, r3, CFG_IBAT2U@l + + isync + mtibat2l(r4) + isync + mtibat2u(r3) + isync + mtdbat2l(r4) + isync + mtdbat2u(r3) + isync + sync + +/* + * Setup I/D BAT3 + */ + lis r4, CFG_IBAT3L@h + ori r4, r4, CFG_IBAT3L@l + lis r3, CFG_IBAT3U@h + ori r3, r3, CFG_IBAT3U@l + + isync + mtibat3l(r4) + isync + mtibat3u(r3) + isync + mtdbat3l(r4) + isync + mtdbat3u(r3) + isync + sync + + +/* + * Invalidate all 64 TLB's + */ + lis r3, 0 + mtctr r3 + lis r5, 4 + +tlblp: + tlbie r3 + sync + addi r3, r3, 0x1000 + cmplw r3, r5 + blt tlblp + + sync + +/* + * Enable Data Translation + */ + lis r4, MEMORY_MGMT_MSR_BITS@h + ori r4, r4, MEMORY_MGMT_MSR_BITS@l + mfmsr r3 + or r3, r4, r3 + mtmsr r3 + isync + sync + + blr + + +#ifdef USE_V2_INIT +/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */ +/* Macro for hiadjust and lo */ +#define HIADJ(arg) arg@ha +#define HI(arg) arg@h +#define LO(arg) arg@l + +#undef LOADPTR +#define LOADPTR(reg,const32) \ + addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32) + +.globl early_init_f + +early_init_f: +/* MPC8245/BMW CPCI System Init + * Jimmy Blair, Broadcom Corp, 2002. + */ + mflr r11 + /* Zero-out registers */ + + addis r0,r0,0 + mtspr SPRG0,r0 + mtspr SPRG1,r0 + mtspr SPRG2,r0 + mtspr SPRG3,r0 + + /* Set MPU/MSR to a known state. Turn on FP */ + + LOADPTR (r3, MSR_FP) + sync + mtmsr r3 + isync + + /* Init the floating point control/status register */ + + mtfsfi 7,0x0 + mtfsfi 6,0x0 + mtfsfi 5,0x0 + mtfsfi 4,0x0 + mtfsfi 3,0x0 + mtfsfi 2,0x0 + mtfsfi 1,0x0 + mtfsfi 0,0x0 + isync + + /* Set MPU/MSR to a known state. Turn off FP */ + +#if 1 /* Turn off floating point (remove to keep FP on) */ + andi. r3, r3, 0 + sync + mtmsr r3 + isync +#endif + + /* Init the Segment registers */ + + andi. r3, r3, 0 + isync + mtsr 0,r3 + isync + mtsr 1,r3 + isync + mtsr 2,r3 + isync + mtsr 3,r3 + isync + mtsr 4,r3 + isync + mtsr 5,r3 + isync + mtsr 6,r3 + isync + mtsr 7,r3 + isync + mtsr 8,r3 + isync + mtsr 9,r3 + isync + mtsr 10,r3 + isync + mtsr 11,r3 + isync + mtsr 12,r3 + isync + mtsr 13,r3 + isync + mtsr 14,r3 + isync + mtsr 15,r3 + isync + + /* Turn off data and instruction cache control bits */ + + mfspr r3, HID0 + isync + rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */ + sync + isync + mtspr HID0, r4 /* HID0 = r4 */ + isync + + /* Get cpu type */ + + mfspr r28, PVR + rlwinm r28, r28, 16, 16, 31 + + /* invalidate the MPU's data/instruction caches */ + + lis r3, 0x0 + cmpli 0, 0, r28, CPU_TYPE_603 + beq cpuIs603 + cmpli 0, 0, r28, CPU_TYPE_603E + beq cpuIs603 + cmpli 0, 0, r28, CPU_TYPE_603P + beq cpuIs603 + cmpli 0, 0, r28, CPU_TYPE_604R + bne cpuNot604R + +cpuIs604R: + lis r3, 0x0 + mtspr HID0, r3 /* disable the caches */ + isync + ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */ + +cpuNot604R: + ori r3, r3, (HID0_ICFI |HID0_DCI) + +cpuIs603: + ori r3, r3, (HID0_ICE | HID0_DCE) + or r4, r4, r3 /* set bits */ + sync + isync + mtspr HID0, r4 /* HID0 = r4 */ + andc r4, r4, r3 /* clear bits */ + isync + cmpli 0, 0, r28, CPU_TYPE_604 + beq cpuIs604 + cmpli 0, 0, r28, CPU_TYPE_604E + beq cpuIs604 + cmpli 0, 0, r28, CPU_TYPE_604R + beq cpuIs604 + mtspr HID0, r4 + isync + +#ifdef USER_I_CACHE_ENABLE + b instCacheOn603 +#else + b cacheEnableDone +#endif + +cpuIs604: + LOADPTR (r5, 0x1000) /* loop count, 0x1000 */ + mtspr CTR, r5 +loopDelay: + nop + bdnz loopDelay + isync + mtspr HID0, r4 + isync + + /* turn the Instruction cache ON for faster FLASH ROM boots */ + +#ifdef USER_I_CACHE_ENABLE + + ori r4, r4, (HID0_ICE | HID0_ICFI) + isync /* Synchronize for ICE enable */ + b writeReg4 +instCacheOn603: + ori r4, r4, (HID0_ICE | HID0_ICFI) + rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */ + + /* + * The setting of the instruction cache enable (ICE) bit must be + * preceded by an isync instruction to prevent the cache from being + * enabled or disabled while an instruction access is in progress. + */ + isync +writeReg4: + mtspr HID0, r4 /* Enable Instr Cache & Inval cache */ + cmpli 0, 0, r28, CPU_TYPE_604 + beq cacheEnableDone + cmpli 0, 0, r28, CPU_TYPE_604E + beq cacheEnableDone + + mtspr HID0, r3 /* using 2 consec instructions */ + /* PPC603 recommendation */ +#endif +cacheEnableDone: + + /* Detect map A or B */ + + addis r5,r0, HI(CHRP_REG_ADDR) + addis r6,r0, HI(CHRP_REG_DATA) + LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */ + LOADPTR (r8, BMC_BASE) + + stwbrx r8,0,(r5) + lwbrx r3,0,(r6) /* Store read value to r3 */ + cmp 0,0,r3,r7 + beq cr0, X4_KAHLUA_START + + /* It's not an 8240, is it an 8245? */ + + LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */ + cmp 0,0,r3,r7 + beq cr0, X4_KAHLUA_START + + /* Save the PCI controller type in r7 */ + mr r7, r3 + + LOADPTR (r5, PREP_REG_ADDR) + LOADPTR (r6, PREP_REG_DATA) + +X4_KAHLUA_START: + /* MPC8245 changes begin here */ + LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */ + stwbrx r3,0,r5 + li r4, 6 /* Command register value */ + sthbrx r4, 0, r6 + + LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */ + stwbrx r3,0,r5 + li r4, -1 /* Write-to-clear all bits */ + li r3, 2 /* PCI_STATUS is at +2 offset */ + sthbrx r4, r3, r6 + + /*-------PROC_INT1_ADR */ + + LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */ + stwbrx r3,0,r5 + LOADPTR (r4, 0xff141b98) + stwbrx r4,0,r6 + + /*-------PROC_INT2_ADR */ + + LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */ + stwbrx r3,0,r5 + lis r4, 0x2000 /* Flush PCI config writes */ + stwbrx r4,0,r6 + + LOADPTR (r9, KAHLUA2_ID) + cmpl 0, 0, r7, r9 + bne L1not8245 + + /* MIOCR1 -- turn on bit for DLL delay */ + + LOADPTR (r3, MIOCR1_ADR_X) + stwbrx r3,0,r5 + li r4, 0x04 + stb r4, MIOCR1_SHIFT(r6) + + /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ + /* SDRAM_CLK_DEL (0x77)*/ + + LOADPTR (r3, MIOCR2_ADR_X) + stwbrx r3,0,r5 + li r4, 0x10 + stb r4, MIOCR2_SHIFT(r6) + + /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */ + + LOADPTR (r3, PMCR2_ADR_X) + stwbrx r3,0,r5 + li r4, 0x20 + stb r4, PMCR2_SHIFT(r6) + + /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */ + + LOADPTR (r3, EUMBBAR) + stwbrx r3,0,r5 + LOADPTR (r4, CFG_EUMB_ADDR) + stwbrx r4,0,r6 + +L1not8245: + + /* Toggle the DLL reset bit in AMBOR */ + + LOADPTR (r3, AMBOR) + stwbrx r3,0,r5 + lbz r4, 0(r6) + + andi. r4, r4, 0xdf + stb r4, 0(r6) /* Clear DLL_RESET */ + sync + + ori r4, r4, 0x20 /* Set DLL_RESET */ + stb r4, 0(r6) + sync + + andi. r4, r4, 0xdf + stb r4, 0(r6) /* Clear DLL_RESET */ + + + /* Enable RCS2, use supplied timings */ + LOADPTR (r3, ERCR1) + stwbrx r3,0,r5 + LOADPTR (r4, 0x80408000) + stwbrx r4,0,r6 + + /* Disable RCS3 parameters */ + LOADPTR (r3, ERCR2) + stwbrx r3,0,r5 + LOADPTR (r4, 0x00000000) + stwbrx r4,0,r6 + + /* RCS3 at 0x70000000, 64KBytes */ + LOADPTR (r3, ERCR2) + stwbrx r3,0,r5 + LOADPTR (r4, 0x00000004) + stwbrx r4,0,r6 + + /*-------MCCR1 */ + +#ifdef INCLUDE_ECC +#define MC_ECC 1 +#else /* INCLUDE_ECC */ +#define MC_ECC 0 +#endif /* INCLUDE_ECC */ + +#define MC1_ROMNAL 8 /* 0-15 */ +#define MC1_ROMFAL 11 /* 0-31 */ +#define MC1_DBUS_SIZE 0 /* 0-3, read only */ +#define MC1_BURST 0 /* 0-1 */ +#define MC1_MEMGO 0 /* 0-1 */ +#define MC1_SREN 1 /* 0-1 */ +#define MC1_RAM_TYPE 0 /* 0-1 */ +#define MC1_PCKEN MC_ECC /* 0-1 */ +#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */ + + LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */ + stwbrx r3,0,r5 + LOADPTR(r4, \ + MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \ + MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \ + MC1_MEMGO << 19 | MC1_SREN << 18 | \ + MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 ) + li r3, MC1_BANKBITS + cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ + bne BankBitsAdd + cmpli 0, 0, r3, 0x5555 + beq K2BankBitsHack /* On 8245, 5555 ==> 0 */ +BankBitsAdd: + ori r4, r3, 0 +K2BankBitsHack: + stwbrx r4, 0, r6 + + /*------- MCCR2 */ + +#define MC2_TS_WAIT_TIMER 0 /* 0-7 */ +#define MC2_ASRISE 8 /* 0-15 */ +#define MC2_ASFALL 4 /* 0-15 */ +#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */ +#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */ +#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */ +#define MC2_ECC_EN 0 /* 0-1 */ +#define MC2_EDO 0 /* 0-1 */ +/* +* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM. +* May need to be decreased for 100 MHz +*/ +#define MC2_REFINT 0x3a5 /* 0-0x3fff */ +#define MC2_RSV_PG 0 /* 0-1 */ +#define MC2_RMW_PAR MC_ECC /* 0-1 */ + + LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */ + stwbrx r3,0,r5 + LOADPTR(r4, \ + MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \ + MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \ + MC2_WRITE_PARITY_CHK_EN << 19 | \ + MC2_INLRD_PARECC_CHK_EN << 18 | \ + MC2_ECC_EN << 17 | MC2_EDO << 16 | \ + MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR) + cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ + bne notK2 + /* clear Kahlua2 reserved bits */ + LOADPTR (r3, 0xfffcffff) + and r4, r4, r3 +notK2: + stwbrx r4,0,r6 + + /*------- MCCR3 */ + +#define MC_BSTOPRE 0x079 /* 0-0x7ff */ + +#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf) +#define MC3_REFREC 8 /* 0-15 */ +#define MC3_RDLAT (4+MC_ECC) /* 0-15 */ +#define MC3_CPX 0 /* 0-1 */ +#define MC3_RAS6P 0 /* 0-15 */ +#define MC3_CAS5 0 /* 0-7 */ +#define MC3_CP4 0 /* 0-7 */ +#define MC3_CAS3 0 /* 0-7 */ +#define MC3_RCD2 0 /* 0-7 */ +#define MC3_RP1 0 /* 0-7 */ + + LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */ + stwbrx r3,0,r5 + LOADPTR(r4, \ + MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \ + MC3_RDLAT << 20 | MC3_CPX << 19 | \ + MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \ + MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1) + cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ + bne notK2b + /* clear Kahlua2 reserved bits */ + LOADPTR (r3, 0xff000000) + and r4, r4, r3 +notK2b: + stwbrx r4,0,r6 + + /*------- MCCR4 */ + +#define MC4_PRETOACT 3 /* 0-15 */ +#define MC4_ACTOPRE 5 /* 0-15 */ +#define MC4_WMODE 0 /* 0-1 */ +#define MC4_INLINE MC_ECC /* 0-1 */ +#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */ +#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3) +#define MC4_REGDIMM 0 /* 0-1 */ +#define MC4_SDMODE_CAS 2 /* 0-7 */ +#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */ +#define MC4_SDMODE_WRAP 0 /* 0-1 */ +#define MC4_SDMODE_BURST 2 /* 0-7 */ +#define MC4_ACTORW 3 /* 0-15 */ +#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf) + + LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */ + stwbrx r3,0,r5 + LOADPTR(r4, \ + MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \ + MC4_WMODE << 23 | MC4_INLINE << 22 | \ + MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \ + MC4_DBUS_RCS1 << 17 | \ + MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \ + MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \ + MC4_ACTORW << 4 | MC4_BSTOPRE_L) + cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */ + bne notK2c + /* Turn on Kahlua2 extended ROM space */ + LOADPTR (r3, 0x00200000) + or r4, r4, r3 +notK2c: + stwbrx r4,0,r6 + +#ifdef INCLUDE_ECC + /*------- MEM_ERREN1 */ + + LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */ + stwbrx r3,0,r5 + lwbrx r4,0,r6 + ori r4,r4,4 /* Set MEM_PERR_EN */ + stwbrx r4,0,r6 +#endif /* INCLUDE_ECC */ + + /*------- MSAR/MEAR */ + + LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0xc0804000) + stwbrx r4,0,r6 + + LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0xc0804000) + stwbrx r4,0,r6 + + LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0x00000000) + stwbrx r4,0,r6 + + LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0x01010101) + stwbrx r4,0,r6 + + LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0xffbf7f3f) + stwbrx r4,0,r6 + + LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0xffbf7f3f) + stwbrx r4,0,r6 + + LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0x00000000) + stwbrx r4,0,r6 + + LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */ + stwbrx r3,0,r5 + LOADPTR (r4, 0x01010101) + stwbrx r4,0,r6 + + /*-------ODCR */ + + LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */ + stwbrx r3,0,r5 + + li r4, 0x7f + stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */ + + /*-------MBEN */ + + LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */ + stwbrx r3,0,r5 + li r4, 0x01 /* Enable bank 0 */ + stb r4, 0(r6) /* MBEN is at +0 offset */ + +#if 0 /* Jimmy: I think page made is broken */ + /*-------PGMAX */ + + LOADPTR (r3, MPM_ADR_X) + stwbrx r3,0,r5 + li r4, 0x32 + stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */ +#endif + + /* Wait before initializing other registers */ + + lis r4,0x0001 + mtctr r4 + +KahluaX4wait200us: + bdnz KahluaX4wait200us + + /* Set MEMGO bit */ + + LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */ + stwbrx r3,0,r5 + lwbrx r4,0,r6 /* old MCCR1 */ + oris r4,r4,0x0008 /* MEMGO=1 */ + stwbrx r4, 0, r6 + + /* Wait again */ + + addis r4,r0,0x0002 + ori r4,r4,0xffff + + mtctr r4 + +KahluaX4wait8ref: + bdnz KahluaX4wait8ref + + sync + eieio + mtlr r11 + blr + +#else /* USE_V2_INIT */ + + + +/* U-Boot works, but memory will not run reliably for all address ranges. + * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not + * initialized correctly. Could work if debugged. + */ +/* PCI Support routines */ + + .globl __pci_config_read_32 +__pci_config_read_32: + lis r4, 0xfec0 + stwbrx r3, r0, r4 + sync + lis r4, 0xfee0 + lwbrx r3, 0, r4 + blr + .globl __pci_config_read_16 +__pci_config_read_16: + lis r4, 0xfec0 + andi. r5, r3, 2 + stwbrx r3, r0, r4 + sync + oris r4, r5, 0xfee0 + lhbrx r3, r0, r4 + blr + .globl __pci_config_read_8 +__pci_config_read_8: + lis r4, 0xfec0 + andi. r5, r3, 3 + stwbrx r3, r0, r4 + sync + oris r4, r5, 0xfee0 + lbz r3, 0(4) + blr + .globl __pci_config_write_32 +__pci_config_write_32: + lis r5, 0xfec0 + stwbrx r3, r0, r5 + sync + lis r5, 0xfee0 + stwbrx r4, r0, r5 + sync + blr + .globl __pci_config_write_16 +__pci_config_write_16: + lis r5, 0xfec0 + andi. r6, r3, 2 + stwbrx r3, r0, 5 + sync + oris r5, r6, 0xfee0 + sthbrx r4, r0, r5 + sync + blr + .globl __pci_config_write_8 +__pci_config_write_8: + lis r5, 0xfec0 + andi. r6, r3, 3 + stwbrx r3, r0, r5 + sync + oris r5, r6, 0xfee0 + stb r4, 0(r5) + sync + blr + .globl in_8 +in_8: + oris r3, r3, 0xfe00 + lbz r3,0(r3) + blr + .globl in_16 +in_16: + oris r3, r3, 0xfe00 + lhbrx r3, 0, r3 + blr + .globl in_16_ne +in_16_ne: + oris r3, r3, 0xfe00 + lhzx r3, 0, r3 + blr + .globl in_32 +in_32: + oris r3, r3, 0xfe00 + lwbrx r3, 0, r3 + blr + .globl out_8 +out_8: + oris r3, r3, 0xfe00 + stb r4, 0(r3) + eieio + blr + .globl out_16 +out_16: + oris r3, r3, 0xfe00 + sthbrx r4, 0, r3 + eieio + blr + .globl out_16_ne +out_16_ne: + oris r3, r3, 0xfe00 + sth r4, 0(r3) + eieio + blr + .globl out_32 +out_32: + oris r3, r3, 0xfe00 + stwbrx r4, 0, r3 + eieio + blr + .globl read_8 +read_8: + lbz r3,0(r3) + blr + .globl read_16 +read_16: + lhbrx r3, 0, r3 + blr + .globl read_32 +read_32: + lwbrx r3, 0, r3 + blr + .globl read_32_ne +read_32_ne: + lwz r3, 0(r3) + blr + .globl write_8 +write_8: + stb r4, 0(r3) + eieio + blr + .globl write_16 +write_16: + sthbrx r4, 0, r3 + eieio + blr + .globl write_32 +write_32: + stwbrx r4, 0, r3 + eieio + blr + .globl write_32_ne +write_32_ne: + stw r4, 0(r3) + eieio + blr + + +.globl early_init_f + +early_init_f: + mflr r11 + lis r10, 0x8000 + + /* PCI Latency Timer */ + li r4, 0x0d + ori r3, r10, PLTR@l + bl __pci_config_write_8 + + /* Cache Line Size */ + li r4, 0x08 + ori r3, r10, PCLSR@l + bl __pci_config_write_8 + + /* PCI Cmd */ + li r4, 6 + ori r3, r10, PCICR@l + bl __pci_config_write_16 + +#if 1 + /* PCI Stat */ + ori r3, r10, PCISR@l + bl __pci_config_read_16 + ori r4, r4, 0xffff + ori r3, r10, PCISR@l + bl __pci_config_write_16 +#endif + + /* PICR1 */ + lis r4, 0xff14 + ori r4, r4, 0x1b98 + ori r3, r10, PICR1@l + bl __pci_config_write_32 + + + /* PICR2 */ + lis r4, 0x0404 + ori r4, r4, 0x0004 + ori r3, r10, PICR2@l + bl __pci_config_write_32 + + /* MIOCR1 */ + li r4, 0x04 + ori r3, r10, MIOCR1@l + bl __pci_config_write_8 + + /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ + /* SDRAM_CLK_DEL (0x77)*/ + li r4, 0x10 + ori r3, r10, MIOCR2@l + bl __pci_config_write_8 + + /* EUMBBAR */ + lis r4, 0xfc00 + ori r3, r10, EUMBBAR@l + bl __pci_config_write_32 + + /* AMBOR */ + + /* Even if Address Map B is not being used (though it should), + * the memory DLL needs to be cleared/set/cleared before using memory. + */ + + ori r3, r10, AMBOR@l + bl __pci_config_read_8 /* get Current bits */ + + andi. r4, r4, 0xffdf + ori r3, r10, AMBOR@l + bl __pci_config_write_16 /* Clear DLL_RESET */ + + ori r4, r4, 0x0020 + ori r3, r10, AMBOR@l + bl __pci_config_write_16 /* Set DLL_RESET */ + + andi. r4, r4, 0xffdf + ori r3, r10, AMBOR@l + bl __pci_config_write_16 /* Clear DLL_RESET */ + + /* ERCR1 */ + lis r4, 0x8040 /* Enable RCS2, use supplied timings */ + ori r4, r4, 0x8000 + ori r3, r10, ERCR1@l + bl __pci_config_write_32 + + /* ERCR2 */ + lis r4, 0x0000 /* Disable RCS3 parms */ + ori r4, r4, 0x0000 + ori r3, r10, ERCR2@l + bl __pci_config_write_32 + + /* ERCR3 */ + lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */ + ori r4, r4, 0x0004 + ori r3, r10, ERCR2@l + bl __pci_config_write_32 + + /* Preserve memgo bit */ + /* MCCR1 */ + +/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */ + lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */ +/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */ +/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */ +/* oris r4, r4, 0x0004 / Self-refresh enable */ + +/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */ +/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */ +/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */ + ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */ + + ori r3, r10, MCCR1@l + bl __pci_config_write_32 + + /* MCCR2 */ + + lis r4,0x0000 +/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */ + oris r4,r4,0x1000 /* ASRISE = 8 clocks */ + oris r4,r4,0x0080 /* ASFALL = 8 clocks */ +/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */ +/* oris r4,r4,0x0008 / Write parity check */ +/* oris r4,r4,0x0004 / SDRAM inline reads */ + + +/* Select a refresh rate; it needs to match the bus speed; if too */ +/* slow, data may be lost; if too fast, performance is lost. We */ +/* use the fastest value so we run at all speeds. */ +/* Refresh = (15600ns/busclk) - (213 (see UM)). */ + +/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */ +/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */ +/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */ +/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */ + ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */ +/* ori r4,r4,0x0002 / Reserve a page */ +/* ori r4,r4,0x0001 / RWM parity */ + + ori r3, r10, MCCR2@l + bl __pci_config_write_32 + + + /* MCCR3 */ + lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */ + oris r4,r4,0x0500 /* REFREC = 8 clocks */ + ori r3, r10, MCCR3@l + bl __pci_config_write_32 + + /* MCCR4 */ /* Turn on registered buffer mode */ + lis r4, 0x2000 /* PRETOACT = 3 clocks */ + oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */ +/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */ +/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */ + oris r4,r4,0x0020 /* EXTROM enabled */ + oris r4,r4,0x0010 /* Registered buffers */ +/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */ + oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */ + +/* ori r4,r4,0x8000 / Registered DIMMs */ + ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */ +/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */ +/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */ + ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */ + ori r4,r4,0x0030 /* ACTORW = 3 clocks */ + ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */ + + ori r3, r10, MCCR4@l + bl __pci_config_write_32 + + /* MSAR1 */ + lis r4, 0xc0804000@h + ori r4, r4, 0xc0804000@l + ori r3, r10, MSAR1@l + bl __pci_config_write_32 + + /* MSAR2 */ + lis r4, 0xc0804000@h + ori r4, r4, 0xc0804000@l + ori r3, r10, MSAR2@l + bl __pci_config_write_32 + + /* MESAR1 */ + lis r4, 0x00000000@h + ori r4, r4, 0x00000000@l + ori r3, r10, EMSAR1@l + bl __pci_config_write_32 + + /* MESAR2 */ + lis r4, 0x01010101@h + ori r4, r4, 0x01010101@l + ori r3, r10, EMSAR2@l + bl __pci_config_write_32 + + /* MEAR1 */ + lis r4, 0xffbf7f3f@h + ori r4, r4, 0xffbf7f3f@l + ori r3, r10, MEAR1@l + bl __pci_config_write_32 + + /* MEAR2 */ + lis r4, 0xffbf7f3f@h + ori r4, r4, 0xffbf7f3f@l + ori r3, r10, MEAR2@l + bl __pci_config_write_32 + + /* MEEAR1 */ + lis r4, 0x00000000@h + ori r4, r4, 0x00000000@l + ori r3, r10, EMEAR1@l + bl __pci_config_write_32 + + /* MEEAR2 */ + lis r4, 0x01010101@h + ori r4, r4, 0x01010101@l + ori r3, r10, EMEAR2@l + bl __pci_config_write_32 + + /* ODCR */ + li r4, 0x7f + ori r3, r10, ODCR@l + bl __pci_config_write_8 + + /* MBER */ + li r4, 0x01 + ori r3, r10, MBER@l + bl __pci_config_write_8 + + /* Page CTR aka PGMAX */ + li r4, 0x32 + ori r3, r10, 0x70 + bl __pci_config_write_8 + +#if 0 + /* CLK Drive */ + ori r4, r10, 0xfc01 /* Top bit will be ignored */ + ori r3, r10, 0x74 + bl __pci_config_write_16 +#endif + + /* delay */ + lis r7, 1 + mtctr r7 +label1: bdnz label1 + + /* Set memgo bit */ + /* MCCR1 */ + ori r3, r10, MCCR1@l + bl __pci_config_read_32 + lis r7, 0x0008 + or r4, r3, r7 + ori r3, r10, MCCR1@l + bl __pci_config_write_32 + + /* delay again */ + lis r7, 1 + mtctr r7 +label2: bdnz label2 +#if 0 +/* DEBUG: Infinite loop, write then read */ +loop: + lis r7, 0xffff + mtctr r7 + li r3, 0x5004 + lis r4, 0xa0a0 + ori r4, r4, 0x5050 + bl write_32_ne + li r3, 0x5004 + bl read_32_ne + bdnz loop +#endif + mtlr r11 + blr +#endif + -- cgit v1.1