From 032c44e0a5085f51084adf717f4286bb5e18cab9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 2 Jun 2010 19:29:23 -0400 Subject: Blackfin: bf518f-ezbrd: convert to portmux framework Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger --- board/bf518f-ezbrd/bf518f-ezbrd.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'board/bf518f-ezbrd/bf518f-ezbrd.c') diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index c2ab598..ff1ac4c 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -146,18 +147,11 @@ int misc_init_r(void) int board_early_init_f(void) { -#if !defined(CONFIG_SYS_NO_FLASH) - /* setup BF518-EZBRD GPIO pin PG11 to AMS2. */ - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG11); - -# if !defined(CONFIG_BFIN_SPI) - /* setup BF518-EZBRD GPIO pin PG15 to AMS3. */ - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_3); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG15); -# endif -#endif - return 0; + /* connect async banks by default */ + const unsigned short pins[] = { + P_AMS2, P_AMS3, 0, + }; + return peripheral_request_list(pins, "async"); } #ifdef CONFIG_BFIN_SDH -- cgit v1.1