From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/atum8548/atum8548.c | 110 +++++++++++++++++++++++----------------------- 1 file changed, 55 insertions(+), 55 deletions(-) (limited to 'board/atum8548/atum8548.c') diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 337cf31..2ef19ce 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -50,9 +50,9 @@ int board_early_init_f (void) int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); - volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %lx\n",(ulong)&gur->porpllsr); @@ -73,15 +73,15 @@ int checkboard (void) ************************************************************************/ long int fixed_sdram (void) { - volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE; - ddr->sdram_interval = CFG_DDR_INTERVAL; + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; @@ -90,13 +90,13 @@ long int fixed_sdram (void) udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ @@ -127,17 +127,17 @@ initdram(int board_type) return dram_size; } -#if defined(CFG_DRAM_TEST) +#if defined(CONFIG_SYS_DRAM_TEST) int testdram(void) { - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; + uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; + uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; uint *p; printf("Testing DRAM from 0x%08x to 0x%08x\n", - CFG_MEMTEST_START, - CFG_MEMTEST_END); + CONFIG_SYS_MEMTEST_START, + CONFIG_SYS_MEMTEST_END); printf("DRAM test phase 1:\n"); for (p = pstart; p < pend; p++) { @@ -185,7 +185,7 @@ int first_free_busno=0; void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; @@ -210,7 +210,7 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); @@ -228,32 +228,32 @@ pci_init_board(void) /* inbound */ pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* outbound memory */ pci_set_region(hose->regions + 1, - CFG_PCIE1_MEM_BASE, - CFG_PCIE1_MEM_PHYS, - CFG_PCIE1_MEM_SIZE, + CONFIG_SYS_PCIE1_MEM_BASE, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(hose->regions + 2, - CFG_PCIE1_IO_BASE, - CFG_PCIE1_IO_PHYS, - CFG_PCIE1_IO_SIZE, + CONFIG_SYS_PCIE1_IO_BASE, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; -#ifdef CFG_PCIE1_MEM_BASE2 +#ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ pci_set_region(hose->regions + 3, - CFG_PCIE1_MEM_BASE2, - CFG_PCIE1_MEM_PHYS2, - CFG_PCIE1_MEM_SIZE2, + CONFIG_SYS_PCIE1_MEM_BASE2, + CONFIG_SYS_PCIE1_MEM_PHYS2, + CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); hose->region_count++; #endif @@ -278,7 +278,7 @@ pci_init_board(void) #ifdef CONFIG_PCI1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; @@ -301,23 +301,23 @@ pci_init_board(void) /* inbound */ pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* outbound memory */ pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; hose->first_busno=first_free_busno; @@ -337,27 +337,27 @@ pci_init_board(void) #ifdef CONFIG_PCI2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci2_hose; if (!(devdisr & MPC85xx_DEVDISR_PCI2)) { pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); pci_set_region(hose->regions + 1, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, + CONFIG_SYS_PCI2_MEM_BASE, + CONFIG_SYS_PCI2_MEM_PHYS, + CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, + CONFIG_SYS_PCI2_IO_BASE, + CONFIG_SYS_PCI2_IO_PHYS, + CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; hose->first_busno=first_free_busno; -- cgit v1.1 From 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Oct 2008 08:28:33 -0500 Subject: 85xx: Convert all fsl_pci_init users to new APIs Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS, MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala Signed-off-by: Andrew Fleming-AFLEMING --- board/atum8548/atum8548.c | 77 +++++++++++++++-------------------------------- 1 file changed, 25 insertions(+), 52 deletions(-) (limited to 'board/atum8548/atum8548.c') diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 2ef19ce..7b7a968 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -182,6 +182,9 @@ static struct pci_controller pcie1_hose; int first_free_busno=0; +extern int fsl_pci_setup_inbound_windows(struct pci_region *r); +extern void fsl_pci_init(struct pci_controller *hose); + void pci_init_board(void) { @@ -211,10 +214,10 @@ pci_init_board(void) #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = io_sel & 6; + struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to slot as %s (base address %x)", @@ -227,36 +230,31 @@ pci_init_board(void) printf ("\n"); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; #ifdef CONFIG_SYS_PCIE1_MEM_BASE2 /* outbound memory */ - pci_set_region(hose->regions + 3, + pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BASE2, CONFIG_SYS_PCIE1_MEM_PHYS2, CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); - hose->region_count++; #endif + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -279,8 +277,8 @@ pci_init_board(void) #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci1_hose; + struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */ @@ -300,26 +298,22 @@ pci_init_board(void) ); /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -340,26 +334,23 @@ pci_init_board(void) volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; extern void fsl_pci_init(struct pci_controller *hose); struct pci_controller *hose = &pci2_hose; + struct pci_region *r = hose->regions; if (!(devdisr & MPC85xx_DEVDISR_PCI2)) { - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + r += fsl_pci_setup_inbound_windows(r); - pci_set_region(hose->regions + 1, + pci_set_region(r++, CONFIG_SYS_PCI2_MEM_BASE, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); - pci_set_region(hose->regions + 2, + pci_set_region(r++, CONFIG_SYS_PCI2_IO_BASE, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); - hose->region_count = 3; + hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); @@ -385,39 +376,21 @@ int last_stage_init(void) } #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, + struct pci_controller *hose); -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ft_cpu_setup(blob, bd); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { #ifdef CONFIG_PCI1 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCI2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci1", &pci2_hose); #endif #ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif - } } #endif -- cgit v1.1 From 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 2 Nov 2008 16:14:22 +0100 Subject: Coding Style cleanup, update CHANGELOG Signed-off-by: Wolfgang Denk --- board/atum8548/atum8548.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/atum8548/atum8548.c') diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 7b7a968..226ef57 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -377,7 +377,7 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); + struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { -- cgit v1.1 From 9b0ad1b1c7a15ff674978705c7c52264978dc5d8 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Tue, 28 Oct 2008 17:53:38 +0800 Subject: 85xx: remove the unused ddr_enable_ecc in the board file The DDR controller of 8548/8544/8568/8572/8536 processors have the ECC data init feature, and the new DDR code is using the feature, and we don't need the way with DMA to init memory any more. Signed-off-by: Dave Liu Acked-by: Andy Fleming --- board/atum8548/atum8548.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'board/atum8548/atum8548.c') diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 226ef57..6ef663e 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -37,10 +37,6 @@ #include #include -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - long int fixed_sdram(void); int board_early_init_f (void) @@ -117,12 +113,6 @@ initdram(int board_type) dram_size = fixed_sdram (); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } -- cgit v1.1