From 61151cccb660cdb06a07fb283de6089913d7bde0 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 19 Apr 2007 10:10:11 +0200 Subject: ATSTK1000: Fix potential flash programming bug The (now obsolete) atngw100 flash programming code was having problems programming the onboard at49bv642 chip. The atstk1000 flash programming code may have the same bug, so import fix for this problem from the AVR32 Linux BSP. Signed-off-by: Haavard Skinnemoen --- board/atmel/atstk1000/flash.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'board/atmel/atstk1000') diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c index 93d790f..4047825 100644 --- a/board/atmel/atstk1000/flash.c +++ b/board/atmel/atstk1000/flash.c @@ -159,7 +159,7 @@ int __flashprog write_buff(flash_info_t *info, uchar *src, { unsigned long flags; uint16_t *base, *p, *s, *end; - uint16_t word, status; + uint16_t word, status, status1; int ret = ERR_OK; if (addr < info->start[0] @@ -194,20 +194,33 @@ int __flashprog write_buff(flash_info_t *info, uchar *src, sync_write_buffer(); /* Wait for completion */ + status1 = readw(p); do { /* TODO: Timeout */ - status = readw(p); - } while ((status != word) && !(status & 0x28)); + status = status1; + status1 = readw(p); + } while (((status ^ status1) & 0x40) /* toggled */ + && !(status1 & 0x28)); /* error bits */ - writew(0xf0, base); - readw(base); - - if (status != word) { - printf("Flash write error at address 0x%p: 0x%02x\n", - p, status); + /* + * We'll need to check once again for toggle bit + * because the toggle bit may stop toggling as I/O5 + * changes to "1" (ref at49bv642.pdf p9) + */ + status1 = readw(p); + status = readw(p); + if ((status ^ status1) & 0x40) { + printf("Flash write error at address 0x%p: " + "0x%02x != 0x%02x\n", + p, status,word); ret = ERR_PROG_ERROR; + writew(0xf0, base); + readw(base); break; } + + writew(0xf0, base); + readw(base); } if (flags) -- cgit v1.1