From 6f0da4972e48f99d37bc522814940a6022cd3084 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 22 Aug 2008 17:39:09 +0900 Subject: sh: Renesas Solutions AP325RXA board support AP325RXA is SH7723's reference board. This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other. In this patch, support SCIF, NOR Flash, and Ethernet. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- board/ap325rxa/cpld-ap325rxa.c | 206 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 board/ap325rxa/cpld-ap325rxa.c (limited to 'board/ap325rxa/cpld-ap325rxa.c') diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c new file mode 100644 index 0000000..16fadcb --- /dev/null +++ b/board/ap325rxa/cpld-ap325rxa.c @@ -0,0 +1,206 @@ +/*************************************************************** + * Project: + * CPLD SlaveSerial Configuration via embedded microprocessor. + * + * Copyright info: + * + * This is free software; you can redistribute it and/or modify + * it as you like. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Description: + * + * This is the main source file that will allow a microprocessor + * to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II, + * and Spartan-II devices via the SlaveSerial Configuration Mode. + * This code is discussed in Xilinx Application Note, XAPP502. + * + * History: + * 3-October-2001 MN/MP - Created + * 20-August-2008 Renesas Solutions - Modified to SH7723 + ****************************************************************/ + +#include + +/* Serial */ +#define SCIF_BASE 0xffe00000 /* SCIF0 */ +#define SCSMR (vu_short *)(SCIF_BASE + 0x00) +#define SCBRR (vu_char *)(SCIF_BASE + 0x04) +#define SCSCR (vu_short *)(SCIF_BASE + 0x08) +#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C) +#define SC_SR (vu_short *)(SCIF_BASE + 0x10) +#define SCFCR (vu_short *)(SCIF_BASE + 0x18) +#define RFCR (vu_long *)0xFE400020 + +#define SCSCR_INIT 0x0038 +#define SCSCR_CLR 0x0000 +#define SCFCR_INIT 0x0006 +#define SCSMR_INIT 0x0080 +#define RFCR_CLR 0xA400 +#define SCI_TD_E 0x0020 +#define SCI_TDRE_CLEAR 0x00df + +#define BPS_SETTING_VALUE 1 /* 12.5MHz */ +#define WAIT_RFCR_COUNTER 500 + +/* CPLD data size */ +#define CPLD_DATA_SIZE 169216 + +/* out */ +#define CPLD_PFC_ADR ((vu_short *)0xA4050112) + +#define CPLD_PROG_ADR ((vu_char *)0xA4050132) +#define CPLD_PROG_DAT 0x80 + +/* in */ +#define CPLD_INIT_ADR ((vu_char *)0xA4050132) +#define CPLD_INIT_DAT 0x40 +#define CPLD_DONE_ADR ((vu_char *)0xA4050132) +#define CPLD_DONE_DAT 0x20 + +#define HIZCRB ((vu_short *)0xA405015A) + +/* data */ +#define CPLD_NOMAL_START 0xA0A80000 +#define CPLD_SAFE_START 0xA0AC0000 +#define MODE_SW (vu_char *)0xA405012A + +static void init_cpld_loader(void) +{ + + *SCSCR = SCSCR_CLR; + *SCFCR = SCFCR_INIT; + *SCSMR = SCSMR_INIT; + + *SCBRR = BPS_SETTING_VALUE; + + *RFCR = RFCR_CLR; /* Refresh counter clear */ + + while (*RFCR < WAIT_RFCR_COUNTER) + ; + + *SCFCR = 0x0; /* RTRG=00, TTRG=00 */ + /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */ + *SCSCR = SCSCR_INIT; +} + +static int check_write_ready(void) +{ + u16 status = *SC_SR; + return status & SCI_TD_E; +} + +static void write_cpld_data(char ch) +{ + while (!check_write_ready()) + ; + + *SC_TDR = ch; + *SC_SR; + *SC_SR = SCI_TDRE_CLEAR; +} + +static int delay(void) +{ + int i; + int c = 0; + for (i = 0; i < 200; i++) { + c = *(volatile int *)0xa0000000; + } + return c; +} + +/*********************************************************************** + * + * Function: slave_serial + * + * Description: Initiates SlaveSerial Configuration. + * Calls ShiftDataOut() to output serial data + * + ***********************************************************************/ +static void slave_serial(void) +{ + int i; + unsigned char *flash; + + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + delay(); + + /* + * Toggle Program Pin by Toggling Program_OE bit + * This is accomplished by writing to the Program Register in the CPLD + * + * NOTE: The Program_OE bit should be driven high to bring the Virtex + * Program Pin low. Likewise, it should be driven low + * to bring the Virtex Program Pin to High-Z + */ + + *CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */ + delay(); + + /* + * Bring Program High-Z + * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z + */ + + /* Program_OE bit Low brings the Virtex Program Pin to High Z: */ + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + + while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0) + delay(); + + /* Begin Slave-Serial Configuration */ + flash = (unsigned char *)CPLD_NOMAL_START; + + for (i = 0; i < CPLD_DATA_SIZE; i++) + write_cpld_data(*flash++); +} + +/*********************************************************************** + * + * Function: check_done_bit + * + * Description: This function takes monitors the CPLD Input Register + * by checking the status of the DONE bit in that Register. + * By doing so, it monitors the Xilinx Virtex device's DONE + * Pin to see if configuration bitstream has been properly + * loaded + * + ***********************************************************************/ +static void check_done_bit(void) +{ + while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT)) + ; +} + +/*********************************************************************** + * + * Function: init_cpld + * + * Description: Begins Slave Serial configuration of Xilinx FPGA + * + ***********************************************************************/ +void init_cpld(void) +{ + /* Init serial device */ + init_cpld_loader(); + + if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */ + return; + + *HIZCRB = 0x0000; + *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */ + + /* write CPLD data from NOR flash to device */ + slave_serial(); + + /* + * Monitor the DONE bit in the CPLD Input Register to see if + * configuration successful + */ + + check_done_bit(); +} -- cgit v1.1