From bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 2 Jun 2008 17:37:28 +0200 Subject: ppc4xx: Remove superfluous dram_init() call or replace it by initdram() Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese --- board/amcc/walnut/walnut.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'board/amcc/walnut') diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index 292e026..641987e 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -86,14 +86,6 @@ int checkboard(void) } /* - * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! - */ -void sdram_init(void) -{ - return; -} - -/* * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of * the necessary info for SDRAM controller configuration */ @@ -101,11 +93,3 @@ long int initdram(int board_type) { return spd_sdram(); } - -int testdram(void) -{ - /* TODO: XXX XXX XXX */ - printf("test: xxx MB - ok\n"); - - return (0); -} -- cgit v1.1 From 9973e3c614721bbf169882ffc3be266a6611cd60 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 9 Jun 2008 16:03:40 -0500 Subject: Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce --- board/amcc/walnut/walnut.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/amcc/walnut') diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index 641987e..28dcb66 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -89,7 +89,7 @@ int checkboard(void) * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of * the necessary info for SDRAM controller configuration */ -long int initdram(int board_type) +phys_size_t initdram(int board_type) { return spd_sdram(); } -- cgit v1.1 From c8a3b109f07f02342d097b30908965f7261d9f15 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 2 Jul 2008 23:49:18 +0200 Subject: Cleanup out-or-tree building for some boards (.depend) Signed-off-by: Wolfgang Denk --- board/amcc/walnut/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/amcc/walnut') diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile index 50fecc6..1939d51 100644 --- a/board/amcc/walnut/Makefile +++ b/board/amcc/walnut/Makefile @@ -38,7 +38,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### -- cgit v1.1