From 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Tue, 8 Jul 2008 22:48:42 -0700 Subject: ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board. Add AMCC Redwood reference board that uses the latest PPC 464 CPU processor combined with a rich mix of peripheral controllers. The board will support PCIe, mutiple Gig ethernet ports, advanced hardware RAID assistance and IEEE 1588. Signed-off-by: Feng Kan Signed-off-by: Stefan Roese --- board/amcc/redwood/redwood.c | 492 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 492 insertions(+) create mode 100644 board/amcc/redwood/redwood.c (limited to 'board/amcc/redwood/redwood.c') diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c new file mode 100644 index 0000000..2c49a23 --- /dev/null +++ b/board/amcc/redwood/redwood.c @@ -0,0 +1,492 @@ +/* + * This is the main board level file for the Redwood AMCC board. + * + * (C) Copyright 2008 + * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include "redwood.h" +#include +#include +#include +#include + +int compare_to_true(char *str); +char *remove_l_w_space(char *in_str); +char *remove_t_w_space(char *in_str); +int get_console_port(void); + +static void early_init_EBC(void); +static int bootdevice_selected(void); +static void early_reinit_EBC(int); +static void early_init_UIC(void); + +/*----------------------------------------------------------------------------+ +| Define Boot devices ++----------------------------------------------------------------------------*/ +#define BOOT_FROM_8BIT_SRAM 0x00 +#define BOOT_FROM_16BIT_SRAM 0x01 +#define BOOT_FROM_32BIT_SRAM 0x02 +#define BOOT_FROM_8BIT_NAND 0x03 +#define BOOT_FROM_16BIT_NOR 0x04 +#define BOOT_DEVICE_UNKNOWN 0xff + +/*----------------------------------------------------------------------------+ +| EBC Devices Characteristics +| Peripheral Bank Access Parameters - EBC_BxAP +| Peripheral Bank Configuration Register - EBC_BxCR ++----------------------------------------------------------------------------*/ + +/* + * 8 bit width SRAM + * BU Value + * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 + * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 + */ +#define EBC_BXAP_8BIT_SRAM EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXAP_16BIT_SRAM EBC_BXAP_8BIT_SRAM +#define EBC_BXAP_32BIT_SRAM EBC_BXAP_8BIT_SRAM + +/* + * NAND flash + * BU Value + * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 + * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 +*/ +#define EBC_BXAP_NAND EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +/* + * NOR flash + * BU Value + * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 + * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 +*/ +#define EBC_BXAP_NOR EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +/* + * FPGA + * BU value : + * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 + * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 + */ +#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(11) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(10) | \ + EBC_BXAP_OEN_ENCODE(1) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(1) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_RW | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_8BIT_SRAM_CS0 EBC_BXCR_BAS_ENCODE(0xFFE00000) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_32BIT_SRAM_CS0 EBC_BXCR_BAS_ENCODE(0xFFC00000) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_32BIT + +#define EBC_BXCR_NAND_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_16BIT_SRAM_CS0 EBC_BXCR_BAS_ENCODE(0xFFE00000) | \ + EBC_BXCR_BS_2MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_NOR_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_NOR_CS1 EBC_BXCR_BAS_ENCODE(0xE0000000) | \ + EBC_BXCR_BS_128MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_NAND_CS1 EBC_BXCR_BAS_ENCODE(0xE0000000) | \ + EBC_BXCR_BS_128MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_NAND_CS2 EBC_BXCR_BAS_ENCODE(0xC0000000) | \ + EBC_BXCR_BS_128MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_SRAM_CS2 EBC_BXCR_BAS_ENCODE(0xC0000000) | \ + EBC_BXCR_BS_4MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_32BIT + +#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_FPGA_CS3 EBC_BXCR_BAS_ENCODE(0xe2000000) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +/***************************************************************************** + * UBOOT initiated board specific function calls + ****************************************************************************/ + +int board_early_init_f(void) +{ + int computed_boot_device = BOOT_DEVICE_UNKNOWN; + + /* + * Initialise EBC + */ + early_init_EBC(); + + /* + * Determine which boot device was selected + */ + computed_boot_device = bootdevice_selected(); + + /* + * Reinit EBC based on selected boot device + */ + early_reinit_EBC(computed_boot_device); + + /* + * Setup for UIC on 460SX redwood board + */ + early_init_UIC(); + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: Redwood - AMCC 460SX Reference Board"); + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + +static void early_init_EBC(void) +{ + /*-------------------------------------------------------------------+ + | Initialize EBC CONFIG - + | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + | default value : + | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + | + +-------------------------------------------------------------------*/ + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | + EBC_CFG_RTC_16PERCLK | + EBC_CFG_ATC_PREVIOUS | + EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | + EBC_CFG_OEO_PREVIOUS | + EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16); + + /*-------------------------------------------------------------------+ + | + | PART 1 : Initialize EBC Bank 3 + | ============================== + | Bank1 is always associated to the EPLD. + | It has to be initialized prior to other banks settings computation + | since some board registers values may be needed to determine the + | boot type + | + +-------------------------------------------------------------------*/ + mtebc(pb1ap, EBC_BXAP_FPGA); + mtebc(pb1cr, EBC_BXCR_FPGA_CS3); + +} + +static int bootdevice_selected(void) +{ + unsigned long sdr0_pinstp; + unsigned long bootstrap_settings; + int computed_boot_device = BOOT_DEVICE_UNKNOWN; + + /*-------------------------------------------------------------------+ + | + | Determine which boot device was selected + | ================================================= + | + | Read Pin Strap Register in PPC460SX + | Result can either be : + | - Boot strap = boot from EBC 8bits => Small Flash + | - Boot strap = boot from PCI + | - Boot strap = IIC + | In case of boot from IIC, read Serial Device Strap Register1 + | + | Result can either be : + | - Boot from EBC - EBC Bus Width = 8bits => Small Flash + | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM + | - Boot from PCI + | + +-------------------------------------------------------------------*/ + /* Read Pin Strap Register in PPC460SX */ + mfsdr(SDR0_PINSTP, sdr0_pinstp); + bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK; + + switch (bootstrap_settings) { + case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0: + /* + * Boot from SRAM, 8bit width + */ + computed_boot_device = BOOT_FROM_8BIT_SRAM; + break; + case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1: + /* + * Boot from SRAM, 32bit width + */ + computed_boot_device = BOOT_FROM_32BIT_SRAM; + break; + case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2: + /* + * Boot from NAND, 8bit width + */ + computed_boot_device = BOOT_FROM_8BIT_NAND; + break; + case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4: + /* + * Boot from SRAM, 16bit width + * Boot setting in IIC EEPROM 0x50 + */ + computed_boot_device = BOOT_FROM_16BIT_SRAM; + break; + case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5: + /* + * Boot from NOR, 16bit width + * Boot setting in IIC EEPROM 0x54 + */ + computed_boot_device = BOOT_FROM_16BIT_NOR; + break; + default: + /* should not be */ + computed_boot_device = BOOT_DEVICE_UNKNOWN; + break; + } + + return computed_boot_device; +} + +static void early_reinit_EBC(int computed_boot_device) +{ + /*-------------------------------------------------------------------+ + | + | Compute EBC settings depending on selected boot device + | ====== ====================================================== + | + | Resulting EBC init will be among following configurations : + | + | - Boot from EBC 8bits => boot from Small Flash selected + | EBC-CS0 = Small Flash + | EBC-CS2 = Large Flash and SRAM + | + | - Boot from EBC 16bits => boot from Large Flash or SRAM + | EBC-CS0 = Large Flash or SRAM + | EBC-CS2 = Small Flash + | + | - Boot from PCI + | EBC-CS0 = not initialized to avoid address contention + | EBC-CS2 = same as boot from Small Flash selected + | + +-------------------------------------------------------------------*/ + unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; + unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0; + unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; + + switch (computed_boot_device) { + /*-------------------------------------------------------------------*/ + case BOOT_FROM_8BIT_SRAM: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM; + ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0; + ebc0_cs1_bxap_value = EBC_BXAP_NOR; + ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; + ebc0_cs2_bxap_value = EBC_BXAP_NAND; + ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_16BIT_SRAM: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM; + ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0; + ebc0_cs1_bxap_value = EBC_BXAP_NOR; + ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; + ebc0_cs2_bxap_value = EBC_BXAP_NAND; + ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_32BIT_SRAM: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM; + ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0; + ebc0_cs1_bxap_value = EBC_BXAP_NOR; + ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; + ebc0_cs2_bxap_value = EBC_BXAP_NAND; + ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_16BIT_NOR: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_NOR; + ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0; + ebc0_cs1_bxap_value = EBC_BXAP_NAND; + ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1; + ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM; + ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_8BIT_NAND: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_NAND; + ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0; + ebc0_cs1_bxap_value = EBC_BXAP_NOR; + ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1; + ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM; + ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2; + break; + + /*-------------------------------------------------------------------*/ + default: + /*-------------------------------------------------------------------*/ + /* BOOT_DEVICE_UNKNOWN */ + break; + } + + mtebc(pb0ap, ebc0_cs0_bxap_value); + mtebc(pb0cr, ebc0_cs0_bxcr_value); + mtebc(pb1ap, ebc0_cs1_bxap_value); + mtebc(pb1cr, ebc0_cs1_bxcr_value); + mtebc(pb2ap, ebc0_cs2_bxap_value); + mtebc(pb2cr, ebc0_cs2_bxcr_value); +} + +static void early_init_UIC(void) +{ + /*--------------------------------------------------------------------+ + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + mtdcr(uic3sr, 0xffffffff); /* Clear all interrupts */ + mtdcr(uic3er, 0x00000000); /* disable all interrupts */ + mtdcr(uic3cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr(uic3pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic3sr, 0xffffffff); /* clear all interrupts */ + + mtdcr(uic2sr, 0xffffffff); /* Clear all interrupts */ + mtdcr(uic2er, 0x00000000); /* disable all interrupts */ + mtdcr(uic2cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr(uic2pr, 0xebebebff); /* Set Interrupt Polarities */ + mtdcr(uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all interrupts */ + + mtdcr(uic1sr, 0xffffffff); /* Clear all interrupts */ + mtdcr(uic1er, 0x00000000); /* disable all interrupts */ + mtdcr(uic1cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr(uic1pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(uic1tr, 0x001fc0ff); /* Set Interrupt Trigger Levels */ + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all interrupts */ + + mtdcr(uic0sr, 0xffffffff); /* Clear all interrupts */ + mtdcr(uic0er, 0x00000000); /* disable all interrupts excepted + * cascade to be checked */ + mtdcr(uic0cr, 0x00104001); /* Set Critical / Non Critical + * interrupts */ + mtdcr(uic0pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(uic0tr, 0x000f003c); /* Set Interrupt Trigger Levels */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic0sr, 0xffffffff); /* clear all interrupts */ + +} -- cgit v1.1