From 90357f14938806010841cad6c7782bf3b91b0c46 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 4 Nov 2011 15:55:21 +0000 Subject: mpc8xx/fec.c: Fix GCC 4.6 build warnings Fix: fec.c: In function 'fec_pin_init': fec.c:381:18: warning: variable 'fecp' set but not used [-Wunused-but-set-variable] fec.c: In function 'fec8xx_miiphy_write': fec.c:1013:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Note: The code was slightly rearranged, but no functional changes attempted, i. e. no conversion to use I/O accessors. Signed-off-by: Wolfgang Denk --- arch/powerpc/cpu/mpc8xx/fec.c | 47 +++++++++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index a2d2bd6..f2a2c3a 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -378,35 +378,39 @@ static void fec_pin_init(int fecidx) { bd_t *bd = gd->bd; volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp; - - /* - * only two FECs please - */ - if ((unsigned int)fecidx >= 2) - hang(); - - if (fecidx == 0) - fecp = &immr->im_cpm.cp_fec1; - else - fecp = &immr->im_cpm.cp_fec2; /* * Set MII speed to 2.5 MHz or slightly below. - * * According to the MPC860T (Rev. D) Fast ethernet controller user - * * manual (6.2.14), - * * the MII management interface clock must be less than or equal - * * to 2.5 MHz. - * * This MDC frequency is equal to system clock / (2 * MII_SPEED). - * * Then MII_SPEED = system_clock / 2 * 2,5 MHz. + * + * According to the MPC860T (Rev. D) Fast ethernet controller user + * manual (6.2.14), + * the MII management interface clock must be less than or equal + * to 2.5 MHz. + * This MDC frequency is equal to system clock / (2 * MII_SPEED). + * Then MII_SPEED = system_clock / 2 * 2,5 MHz. * * All MII configuration is done via FEC1 registers: */ immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; #if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) - /* our PHYs are the limit at 2.5 MHz */ - fecp->fec_mii_speed <<= 1; + { + volatile fec_t *fecp; + + /* + * only two FECs please + */ + if ((unsigned int)fecidx >= 2) + hang(); + + if (fecidx == 0) + fecp = &immr->im_cpm.cp_fec1; + else + fecp = &immr->im_cpm.cp_fec2; + + /* our PHYs are the limit at 2.5 MHz */ + fecp->fec_mii_speed <<= 1; + } #endif #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) @@ -1010,11 +1014,10 @@ int fec8xx_miiphy_read(const char *devname, unsigned char addr, int fec8xx_miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - short rdreg; /* register working value */ #ifdef MII_DEBUG printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); #endif - rdreg = mii_send(mk_mii_write(addr, reg, value)); + (void)mii_send(mk_mii_write(addr, reg, value)); #ifdef MII_DEBUG printf ("0x%04x\n", value); -- cgit v1.1