From 635f330fc7883a4cc703bc5ea2b90fc7d7f69e10 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 29 Apr 2011 23:23:28 -0400 Subject: Blackfin: uart: add multiple serial support This brings CONFIG_SERIAL_MULTI support to the Blackfin on-chip UARTs. Ends up adding only ~512bytes per additional UART. Signed-off-by: Mike Frysinger --- arch/blackfin/cpu/initcode.c | 12 ++- arch/blackfin/cpu/serial.c | 205 ++++++++++++++++++++++++++++++++++--------- arch/blackfin/cpu/serial.h | 44 +++++++--- arch/blackfin/lib/board.c | 4 + 4 files changed, 210 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 750add0..61dc5ab 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -24,6 +24,8 @@ __attribute__((always_inline)) static inline void serial_init(void) { + uint32_t uart_base = UART_DLL; + #ifdef __ADSPBF54x__ # ifdef BFIN_BOOT_UART_USE_RTS # define BFIN_UART_USE_RTS 1 @@ -65,13 +67,13 @@ static inline void serial_init(void) if (BFIN_DEBUG_EARLY_SERIAL) { int ucen = bfin_read16(&pUART->gctl) & UCEN; - serial_early_init(); + serial_early_init(uart_base); /* If the UART is off, that means we need to program * the baud rate ourselves initially. */ if (ucen != UCEN) - serial_early_set_baud(CONFIG_BAUDRATE); + serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } } @@ -79,6 +81,8 @@ __attribute__((always_inline)) static inline void serial_deinit(void) { #ifdef __ADSPBF54x__ + uint32_t uart_base = UART_DLL; + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { /* clear forced RTS rather than relying on auto RTS */ bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); @@ -89,6 +93,8 @@ static inline void serial_deinit(void) __attribute__((always_inline)) static inline void serial_putc(char c) { + uint32_t uart_base = UART_DLL; + if (!BFIN_DEBUG_EARLY_SERIAL) return; @@ -519,7 +525,7 @@ update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) unsigned int quotient; for (quotient = 0; dividend > 0; ++quotient) dividend -= divisor; - serial_early_put_div(quotient - ANOMALY_05000230); + serial_early_put_div(UART_DLL, quotient - ANOMALY_05000230); serial_putc('c'); } diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index b15c945..0252220 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -39,6 +39,8 @@ #include #include +#include +#include #include #include @@ -59,14 +61,14 @@ static size_t cache_count; * tally of all the status bits. */ static uint16_t uart_lsr_save; -static uint16_t uart_lsr_read(void) +static uint16_t uart_lsr_read(uint32_t uart_base) { uint16_t lsr = bfin_read16(&pUART->lsr); uart_lsr_save |= (lsr & (OE|PE|FE|BI)); return lsr | uart_lsr_save; } /* Just do the clear for everyone since it can't hurt. */ -static void uart_lsr_clear(void) +static void uart_lsr_clear(uint32_t uart_base) { uart_lsr_save = 0; bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); @@ -76,46 +78,17 @@ static void uart_lsr_clear(void) * bits get set/cleared, we don't really care since we don't read them * anyways (and thus anomaly 05000099 is irrelevant). */ -static uint16_t uart_lsr_read(void) +static inline uint16_t uart_lsr_read(uint32_t uart_base) { return bfin_read16(&pUART->lsr); } -static void uart_lsr_clear(void) +static void uart_lsr_clear(uint32_t uart_base) { bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); } #endif -/* Symbol for our assembly to call. */ -void serial_set_baud(uint32_t baud) -{ - serial_early_set_baud(baud); -} - -/* Symbol for common u-boot code to call. - * Setup the baudrate (brg: baudrate generator). - */ -void serial_setbrg(void) -{ - serial_set_baud(gd->baudrate); -} - -/* Symbol for our assembly to call. */ -void serial_initialize(void) -{ - serial_early_init(); -} - -/* Symbol for common u-boot code to call. */ -int serial_init(void) -{ - serial_initialize(); - serial_setbrg(); - uart_lsr_clear(); - return 0; -} - -void serial_putc(const char c) +static void uart_putc(uint32_t uart_base, const char c) { /* send a \r for compatibility */ if (c == '\n') @@ -124,7 +97,7 @@ void serial_putc(const char c) WATCHDOG_RESET(); /* wait for the hardware fifo to clear up */ - while (!(uart_lsr_read() & THRE)) + while (!(uart_lsr_read(uart_base) & THRE)) continue; /* queue the character for transmission */ @@ -134,18 +107,18 @@ void serial_putc(const char c) WATCHDOG_RESET(); } -int serial_tstc(void) +static int uart_tstc(uint32_t uart_base) { WATCHDOG_RESET(); - return (uart_lsr_read() & DR) ? 1 : 0; + return (uart_lsr_read(uart_base) & DR) ? 1 : 0; } -int serial_getc(void) +static int uart_getc(uint32_t uart_base) { uint16_t uart_rbr_val; /* wait for data ! */ - while (!serial_tstc()) + while (!uart_tstc(uart_base)) continue; /* grab the new byte */ @@ -153,7 +126,7 @@ int serial_getc(void) #ifdef CONFIG_DEBUG_SERIAL /* grab & clear the LSR */ - uint16_t uart_lsr_val = uart_lsr_read(); + uint16_t uart_lsr_val = uart_lsr_read(uart_base); cached_lsr[cache_count] = uart_lsr_val; cached_rbr[cache_count] = uart_rbr_val; @@ -175,11 +148,159 @@ int serial_getc(void) return -1; } #endif - uart_lsr_clear(); + uart_lsr_clear(uart_base); return uart_rbr_val; } +#ifdef CONFIG_SYS_BFIN_UART + +static void uart_puts(uint32_t uart_base, const char *s) +{ + while (*s) + uart_putc(uart_base, *s++); +} + +#define DECL_BFIN_UART(n) \ +static int uart##n##_init(void) \ +{ \ + const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ + peripheral_request_list(pins, "bfin-uart"); \ + uart_init(MMR_UART(n)); \ + serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + uart_lsr_clear(MMR_UART(n)); \ + return 0; \ +} \ +\ +static int uart##n##_uninit(void) \ +{ \ + return serial_early_uninit(MMR_UART(n)); \ +} \ +\ +static void uart##n##_setbrg(void) \ +{ \ + serial_early_set_baud(MMR_UART(n), gd->baudrate); \ +} \ +\ +static int uart##n##_getc(void) \ +{ \ + return uart_getc(MMR_UART(n)); \ +} \ +\ +static int uart##n##_tstc(void) \ +{ \ + return uart_tstc(MMR_UART(n)); \ +} \ +\ +static void uart##n##_putc(const char c) \ +{ \ + uart_putc(MMR_UART(n), c); \ +} \ +\ +static void uart##n##_puts(const char *s) \ +{ \ + uart_puts(MMR_UART(n), s); \ +} \ +\ +struct serial_device bfin_serial##n##_device = { \ + .name = "bfin_uart"#n, \ + .init = uart##n##_init, \ + .uninit = uart##n##_uninit, \ + .setbrg = uart##n##_setbrg, \ + .getc = uart##n##_getc, \ + .tstc = uart##n##_tstc, \ + .putc = uart##n##_putc, \ + .puts = uart##n##_puts, \ +}; + +#ifdef UART0_DLL +DECL_BFIN_UART(0) +#endif +#ifdef UART1_DLL +DECL_BFIN_UART(1) +#endif +#ifdef UART2_DLL +DECL_BFIN_UART(2) +#endif +#ifdef UART3_DLL +DECL_BFIN_UART(3) +#endif + +__weak struct serial_device *default_serial_console(void) +{ +#if CONFIG_UART_CONSOLE == 0 + return &bfin_serial0_device; +#elif CONFIG_UART_CONSOLE == 1 + return &bfin_serial1_device; +#elif CONFIG_UART_CONSOLE == 2 + return &bfin_serial2_device; +#elif CONFIG_UART_CONSOLE == 3 + return &bfin_serial3_device; +#endif +} + +void serial_register_bfin_uart(void) +{ +#ifdef UART0_DLL + serial_register(&bfin_serial0_device); +#endif +#ifdef UART1_DLL + serial_register(&bfin_serial1_device); +#endif +#ifdef UART2_DLL + serial_register(&bfin_serial2_device); +#endif +#ifdef UART3_DLL + serial_register(&bfin_serial3_device); +#endif +} + +#else + +/* Symbol for our assembly to call. */ +void serial_set_baud(uint32_t baud) +{ + serial_early_set_baud(UART_DLL, baud); +} + +/* Symbol for common u-boot code to call. + * Setup the baudrate (brg: baudrate generator). + */ +void serial_setbrg(void) +{ + serial_set_baud(gd->baudrate); +} + +/* Symbol for our assembly to call. */ +void serial_initialize(void) +{ + serial_early_init(UART_DLL); +} + +/* Symbol for common u-boot code to call. */ +int serial_init(void) +{ + serial_initialize(); + serial_setbrg(); + uart_lsr_clear(UART_DLL); + return 0; +} + +int serial_tstc(void) +{ + return uart_tstc(UART_DLL); +} + +int serial_getc(void) +{ + return uart_getc(UART_DLL); +} + +void serial_putc(const char c) +{ + uart_putc(UART_DLL, c); +} + void serial_puts(const char *s) { while (*s) @@ -187,3 +308,5 @@ void serial_puts(const char *s) } #endif + +#endif diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index 7999a19..aa5c217 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -82,17 +82,19 @@ struct bfin_mmr_serial { #define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx #define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) -#define MMR_UART(mmr) _PASTE_UART(CONFIG_UART_CONSOLE, UART, DLL) -#define P_UART(pin) _PASTE_UART(CONFIG_UART_CONSOLE, P_UART, pin) +#define MMR_UART(n) _PASTE_UART(n, UART, DLL) +#define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin) +#define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin) #ifndef UART_DLL -# define UART_DLL MMR_UART(DLL) +# define UART_DLL MMR_UART(CONFIG_UART_CONSOLE) #else +# define UART0_DLL UART_DLL # if CONFIG_UART_CONSOLE != 0 # error CONFIG_UART_CONSOLE must be 0 on parts with only one UART # endif #endif -#define pUART ((volatile struct bfin_mmr_serial *)UART_DLL) +#define pUART ((volatile struct bfin_mmr_serial *)uart_base) #if BFIN_UART_HW_VER == 2 # define ACCESS_LATCH() @@ -168,11 +170,8 @@ static inline void serial_do_portmux(void) } __attribute__((always_inline)) -static inline void serial_early_init(void) +static inline int uart_init(uint32_t uart_base) { - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ bfin_write16(&pUART->gctl, UCEN); @@ -180,10 +179,30 @@ static inline void serial_early_init(void) bfin_write16(&pUART->lcr, WLS_8); SSYNC(); + + return 0; } __attribute__((always_inline)) -static inline void serial_early_put_div(uint16_t divisor) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UCEN */ + bfin_write16(&pUART->gctl, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint32_t uart_base, uint16_t divisor) { /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); @@ -202,6 +221,8 @@ static inline void serial_early_put_div(uint16_t divisor) __attribute__((always_inline)) static inline uint16_t serial_early_get_div(void) { + uint32_t uart_base = UART_DLL; + /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); @@ -223,13 +244,14 @@ static inline uint16_t serial_early_get_div(void) #endif __attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t baud) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) { /* Translate from baud into divisor in terms of SCLK. The * weird multiplication is to make sure we over sample just * a little rather than under sample the incoming signals. */ - serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); + serial_early_put_div(uart_base, + (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); } #ifndef BFIN_IN_INITCODE diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 362b8c4..e00050c 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -265,6 +266,9 @@ void board_init_f(ulong bootflag) init_baudrate(); serial_early_puts("Serial init\n"); serial_init(); +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif serial_early_puts("Console init flash\n"); console_init_f(); serial_early_puts("End of early debugging\n"); -- cgit v1.1