From 4c425570214cac091d9bdcf840b936062fb8da12 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 27 Feb 2015 02:26:42 +0900 Subject: ARM: UniPhier: move SoC sources to mach-uniphier Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: Masahiro Yamada --- arch/arm/Kconfig | 2 +- arch/arm/Makefile | 1 + arch/arm/cpu/armv7/Makefile | 1 - arch/arm/cpu/armv7/uniphier/Kconfig | 89 -------- arch/arm/cpu/armv7/uniphier/Makefile | 36 ---- arch/arm/cpu/armv7/uniphier/board_common.c | 32 --- arch/arm/cpu/armv7/uniphier/board_early_init_f.c | 22 -- arch/arm/cpu/armv7/uniphier/board_early_init_r.c | 15 -- arch/arm/cpu/armv7/uniphier/board_late_init.c | 53 ----- arch/arm/cpu/armv7/uniphier/cache_uniphier.c | 154 -------------- arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c | 229 --------------------- arch/arm/cpu/armv7/uniphier/cmd_pinmon.c | 33 --- arch/arm/cpu/armv7/uniphier/cpu_info.c | 59 ------ arch/arm/cpu/armv7/uniphier/ddrphy_training.c | 144 ------------- arch/arm/cpu/armv7/uniphier/dram_init.c | 16 -- arch/arm/cpu/armv7/uniphier/init_page_table.S | 26 --- arch/arm/cpu/armv7/uniphier/lowlevel_init.S | 163 --------------- arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 14 -- arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c | 33 --- arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c | 29 --- arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c | 70 ------- .../cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S | 29 --- arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c | 63 ------ arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 27 --- arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c | 189 ----------------- arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 51 ----- arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c | 28 --- arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 171 --------------- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 14 -- arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c | 66 ------ arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 29 --- arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c | 70 ------- .../cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S | 39 ---- arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 52 ----- arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 24 --- arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c | 168 --------------- .../arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c | 18 -- arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 75 ------- arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 28 --- arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 157 -------------- arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 14 -- arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c | 29 --- arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c | 75 ------- .../cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S | 29 --- arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c | 66 ------ arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 27 --- arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c | 201 ------------------ .../arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 58 ------ arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c | 1 - arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c | 151 -------------- arch/arm/cpu/armv7/uniphier/print_misc_info.c | 13 -- arch/arm/cpu/armv7/uniphier/reset.c | 26 --- arch/arm/cpu/armv7/uniphier/smp.S | 54 ----- arch/arm/cpu/armv7/uniphier/spl.c | 59 ------ arch/arm/cpu/armv7/uniphier/support_card.c | 225 -------------------- arch/arm/cpu/armv7/uniphier/timer.c | 39 ---- arch/arm/mach-uniphier/Kconfig | 89 ++++++++ arch/arm/mach-uniphier/Makefile | 36 ++++ arch/arm/mach-uniphier/board_common.c | 32 +++ arch/arm/mach-uniphier/board_early_init_f.c | 22 ++ arch/arm/mach-uniphier/board_early_init_r.c | 15 ++ arch/arm/mach-uniphier/board_late_init.c | 53 +++++ arch/arm/mach-uniphier/cache_uniphier.c | 154 ++++++++++++++ arch/arm/mach-uniphier/cmd_ddrphy.c | 229 +++++++++++++++++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 33 +++ arch/arm/mach-uniphier/cpu_info.c | 59 ++++++ arch/arm/mach-uniphier/ddrphy_training.c | 144 +++++++++++++ arch/arm/mach-uniphier/dram_init.c | 16 ++ arch/arm/mach-uniphier/init_page_table.S | 26 +++ arch/arm/mach-uniphier/lowlevel_init.S | 163 +++++++++++++++ arch/arm/mach-uniphier/ph1-ld4/Makefile | 14 ++ arch/arm/mach-uniphier/ph1-ld4/bcu_init.c | 33 +++ arch/arm/mach-uniphier/ph1-ld4/boot-mode.c | 1 + arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c | 29 +++ arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c | 70 +++++++ arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S | 29 +++ arch/arm/mach-uniphier/ph1-ld4/pinctrl.c | 63 ++++++ arch/arm/mach-uniphier/ph1-ld4/platdevice.c | 27 +++ arch/arm/mach-uniphier/ph1-ld4/pll_init.c | 189 +++++++++++++++++ arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c | 1 + arch/arm/mach-uniphier/ph1-ld4/sbc_init.c | 51 +++++ arch/arm/mach-uniphier/ph1-ld4/sg_init.c | 28 +++ arch/arm/mach-uniphier/ph1-ld4/umc_init.c | 171 +++++++++++++++ arch/arm/mach-uniphier/ph1-pro4/Makefile | 14 ++ arch/arm/mach-uniphier/ph1-pro4/boot-mode.c | 66 ++++++ arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c | 29 +++ arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c | 70 +++++++ arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 39 ++++ arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 52 +++++ arch/arm/mach-uniphier/ph1-pro4/platdevice.c | 24 +++ arch/arm/mach-uniphier/ph1-pro4/pll_init.c | 168 +++++++++++++++ arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c | 18 ++ arch/arm/mach-uniphier/ph1-pro4/sbc_init.c | 75 +++++++ arch/arm/mach-uniphier/ph1-pro4/sg_init.c | 28 +++ arch/arm/mach-uniphier/ph1-pro4/umc_init.c | 157 ++++++++++++++ arch/arm/mach-uniphier/ph1-sld8/Makefile | 14 ++ arch/arm/mach-uniphier/ph1-sld8/bcu_init.c | 1 + arch/arm/mach-uniphier/ph1-sld8/boot-mode.c | 1 + arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c | 29 +++ arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c | 75 +++++++ arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S | 29 +++ arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 66 ++++++ arch/arm/mach-uniphier/ph1-sld8/platdevice.c | 27 +++ arch/arm/mach-uniphier/ph1-sld8/pll_init.c | 201 ++++++++++++++++++ arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c | 1 + arch/arm/mach-uniphier/ph1-sld8/sbc_init.c | 58 ++++++ arch/arm/mach-uniphier/ph1-sld8/sg_init.c | 1 + arch/arm/mach-uniphier/ph1-sld8/umc_init.c | 151 ++++++++++++++ arch/arm/mach-uniphier/print_misc_info.c | 13 ++ arch/arm/mach-uniphier/reset.c | 26 +++ arch/arm/mach-uniphier/smp.S | 54 +++++ arch/arm/mach-uniphier/spl.c | 59 ++++++ arch/arm/mach-uniphier/support_card.c | 225 ++++++++++++++++++++ arch/arm/mach-uniphier/timer.c | 39 ++++ 119 files changed, 3589 insertions(+), 3589 deletions(-) delete mode 100644 arch/arm/cpu/armv7/uniphier/Kconfig delete mode 100644 arch/arm/cpu/armv7/uniphier/Makefile delete mode 100644 arch/arm/cpu/armv7/uniphier/board_common.c delete mode 100644 arch/arm/cpu/armv7/uniphier/board_early_init_f.c delete mode 100644 arch/arm/cpu/armv7/uniphier/board_early_init_r.c delete mode 100644 arch/arm/cpu/armv7/uniphier/board_late_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/cache_uniphier.c delete mode 100644 arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c delete mode 100644 arch/arm/cpu/armv7/uniphier/cmd_pinmon.c delete mode 100644 arch/arm/cpu/armv7/uniphier/cpu_info.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ddrphy_training.c delete mode 100644 arch/arm/cpu/armv7/uniphier/dram_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/init_page_table.S delete mode 100644 arch/arm/cpu/armv7/uniphier/lowlevel_init.S delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/print_misc_info.c delete mode 100644 arch/arm/cpu/armv7/uniphier/reset.c delete mode 100644 arch/arm/cpu/armv7/uniphier/smp.S delete mode 100644 arch/arm/cpu/armv7/uniphier/spl.c delete mode 100644 arch/arm/cpu/armv7/uniphier/support_card.c delete mode 100644 arch/arm/cpu/armv7/uniphier/timer.c create mode 100644 arch/arm/mach-uniphier/Kconfig create mode 100644 arch/arm/mach-uniphier/Makefile create mode 100644 arch/arm/mach-uniphier/board_common.c create mode 100644 arch/arm/mach-uniphier/board_early_init_f.c create mode 100644 arch/arm/mach-uniphier/board_early_init_r.c create mode 100644 arch/arm/mach-uniphier/board_late_init.c create mode 100644 arch/arm/mach-uniphier/cache_uniphier.c create mode 100644 arch/arm/mach-uniphier/cmd_ddrphy.c create mode 100644 arch/arm/mach-uniphier/cmd_pinmon.c create mode 100644 arch/arm/mach-uniphier/cpu_info.c create mode 100644 arch/arm/mach-uniphier/ddrphy_training.c create mode 100644 arch/arm/mach-uniphier/dram_init.c create mode 100644 arch/arm/mach-uniphier/init_page_table.S create mode 100644 arch/arm/mach-uniphier/lowlevel_init.S create mode 100644 arch/arm/mach-uniphier/ph1-ld4/Makefile create mode 100644 arch/arm/mach-uniphier/ph1-ld4/bcu_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/boot-mode.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S create mode 100644 arch/arm/mach-uniphier/ph1-ld4/pinctrl.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/platdevice.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/pll_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/sg_init.c create mode 100644 arch/arm/mach-uniphier/ph1-ld4/umc_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/Makefile create mode 100644 arch/arm/mach-uniphier/ph1-pro4/boot-mode.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S create mode 100644 arch/arm/mach-uniphier/ph1-pro4/pinctrl.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/platdevice.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/pll_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/sg_init.c create mode 100644 arch/arm/mach-uniphier/ph1-pro4/umc_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/Makefile create mode 100644 arch/arm/mach-uniphier/ph1-sld8/bcu_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/boot-mode.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S create mode 100644 arch/arm/mach-uniphier/ph1-sld8/pinctrl.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/platdevice.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/pll_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/sg_init.c create mode 100644 arch/arm/mach-uniphier/ph1-sld8/umc_init.c create mode 100644 arch/arm/mach-uniphier/print_misc_info.c create mode 100644 arch/arm/mach-uniphier/reset.c create mode 100644 arch/arm/mach-uniphier/smp.S create mode 100644 arch/arm/mach-uniphier/spl.c create mode 100644 arch/arm/mach-uniphier/support_card.c create mode 100644 arch/arm/mach-uniphier/timer.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a2f91c..2265afb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -723,7 +723,7 @@ source "arch/arm/cpu/armv7/s5pc1xx/Kconfig" source "arch/arm/mach-tegra/Kconfig" -source "arch/arm/cpu/armv7/uniphier/Kconfig" +source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/mach-versatile/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 878ae26..08946de 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,6 +15,7 @@ machine-$(CONFIG_ARCH_NOMADIK) += nomadik # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X machine-$(CONFIG_ORION5X) += orion5x machine-$(CONFIG_TEGRA) += tegra +machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSATILE) += versatile machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index b228ed6..ad22489 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -56,6 +56,5 @@ obj-$(CONFIG_SOCFPGA) += socfpga/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_U8500) += u8500/ -obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/ obj-$(CONFIG_VF610) += vf610/ obj-$(CONFIG_ZYNQ) += zynq/ diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig deleted file mode 100644 index 8335685..0000000 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -menu "Panasonic UniPhier platform" - depends on ARCH_UNIPHIER - -config SYS_SOC - default "uniphier" - -config SYS_CONFIG_NAME - default "uniphier" - -config UNIPHIER_SMP - bool - -choice - prompt "UniPhier SoC select" - -config MACH_PH1_PRO4 - bool "PH1-Pro4" - select UNIPHIER_SMP - -config MACH_PH1_LD4 - bool "PH1-LD4" - -config MACH_PH1_SLD8 - bool "PH1-sLD8" - -endchoice - -choice - prompt "UniPhier Support Card select" - optional - -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" - help - This option provides support for the expansion board with PFC - original address mapping. - - Say Y to use the on-board UART, Ether, LED devices. - -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" - help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. - - Say Y to use the on-board UART, Ether, LED devices. - -endchoice - -config SYS_MALLOC_F - default y - -config SYS_MALLOC_F_LEN - default 0x400 - -config CMD_PINMON - bool "Enable boot mode pins monitor command" - default y - help - The command "pinmon" shows the state of the boot mode pins. - The boot mode pins are latched when the system reset is deasserted - and determine which device the system should load a boot image from. - -config CMD_DDRPHY_DUMP - bool "Enable dump command of DDR PHY parameters" - help - The command "ddrphy" shows the resulting parameters of DDR PHY - training; it is useful for the evaluation of DDR PHY training. - -choice - prompt "DDR3 Frequency select" - -config DDR_FREQ_1600 - bool "DDR3 1600" - depends on MACH_PH1_PRO4 || MACH_PH1_LD4 - -config DDR_FREQ_1333 - bool "DDR3 1333" - depends on MACH_PH1_LD4 || MACH_PH1_SLD8 - -endchoice - -config DDR_FREQ - int - default 1333 if DDR_FREQ_1333 - default 1600 if DDR_FREQ_1600 - -endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile deleted file mode 100644 index df418dd..0000000 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD - -obj-y += lowlevel_init.o -obj-y += init_page_table.o -obj-y += spl.o -obj-y += ddrphy_training.o - -else - -obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o -obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o -obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o -obj-y += dram_init.o -obj-y += board_common.o -obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o -obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o -obj-y += reset.o -obj-y += cache_uniphier.o -obj-$(CONFIG_UNIPHIER_SMP) += smp.o -obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o -obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o - -endif - -obj-y += timer.o - -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o - -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/cpu/armv7/uniphier/board_common.c b/arch/arm/cpu/armv7/uniphier/board_common.c deleted file mode 100644 index 3fb26c6..0000000 --- a/arch/arm/cpu/armv7/uniphier/board_common.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - led_write(U, B, O, O); - - return 0; -} - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_f.c b/arch/arm/cpu/armv7/uniphier/board_early_init_f.c deleted file mode 100644 index d25bbae..0000000 --- a/arch/arm/cpu/armv7/uniphier/board_early_init_f.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void pin_init(void); - -int board_early_init_f(void) -{ - led_write(U, 0, , ); - - pin_init(); - - led_write(U, 1, , ); - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c deleted file mode 100644 index cb7e04f..0000000 --- a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -int board_early_init_r(void) -{ - uniphier_board_late_init(); - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c deleted file mode 100644 index 0622a1e..0000000 --- a/arch/arm/cpu/armv7/uniphier/board_late_init.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include <../drivers/mtd/nand/denali.h> - -static void nand_denali_wp_disable(void) -{ -#ifdef CONFIG_NAND_DENALI - /* - * Since the boot rom enables the write protection for NAND boot mode, - * it must be disabled somewhere for "nand write", "nand erase", etc. - * The workaround is here to not disturb the Denali NAND controller - * driver just for a really SoC-specific thing. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - - writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT); -#endif -} - -int board_late_init(void) -{ - puts("MODE: "); - - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - printf("eMMC Boot\n"); - setenv("bootmode", "emmcboot"); - break; - case BOOT_DEVICE_NAND: - printf("NAND Boot\n"); - setenv("bootmode", "nandboot"); - nand_denali_wp_disable(); - break; - case BOOT_DEVICE_NOR: - printf("NOR Boot\n"); - setenv("bootmode", "norboot"); - break; - default: - printf("Unsupported Boot Mode\n"); - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/cache_uniphier.c b/arch/arm/cpu/armv7/uniphier/cache_uniphier.c deleted file mode 100644 index e47f977..0000000 --- a/arch/arm/cpu/armv7/uniphier/cache_uniphier.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#ifdef CONFIG_UNIPHIER_L2CACHE_ON -static void uniphier_cache_maint_all(u32 operation) -{ - /* try until the command is successfully set */ - do { - writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM); - } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); - - /* wait until the operation is completed */ - while (readl(SSCOLPQS) != SSCOLPQS_EF) - ; - - /* clear the complete notification flag */ - writel(SSCOLPQS_EF, SSCOLPQS); - - writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ - readl(SSCOPE); /* need a read back to confirm */ -} - -void v7_outer_cache_flush_all(void) -{ - uniphier_cache_maint_all(SSCOQM_CM_WB_INV); -} - -void v7_outer_cache_inval_all(void) -{ - uniphier_cache_maint_all(SSCOQM_CM_INV); -} - -static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation) -{ - /* try until the command is successfully set */ - do { - writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM); - writel(start, SSCOQAD); - writel(size, SSCOQSZ); - - } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); - - /* wait until the operation is completed */ - while (readl(SSCOLPQS) != SSCOLPQS_EF) - ; - - /* clear the complete notification flag */ - writel(SSCOLPQS_EF, SSCOLPQS); -} - -static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) -{ - u32 size; - - /* - * If start address is not aligned to cache-line, - * do cache operation for the first cache-line - */ - start = start & ~(SSC_LINE_SIZE - 1); - - if (start == 0 && end >= (u32)(-SSC_LINE_SIZE)) { - /* this means cache operation for all range */ - uniphier_cache_maint_all(operation); - return; - } - - /* - * If end address is not aligned to cache-line, - * do cache operation for the last cache-line - */ - size = (end - start + SSC_LINE_SIZE - 1) & ~(SSC_LINE_SIZE - 1); - - while (size) { - u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ? - SSC_RANGE_OP_MAX_SIZE : size; - __uniphier_cache_maint_range(start, chunk_size, operation); - - start += chunk_size; - size -= chunk_size; - } - - writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ - readl(SSCOPE); /* need a read back to confirm */ -} - -void v7_outer_cache_flush_range(u32 start, u32 end) -{ - uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV); -} - -void v7_outer_cache_inval_range(u32 start, u32 end) -{ - uniphier_cache_maint_range(start, end, SSCOQM_CM_INV); -} - -void v7_outer_cache_enable(void) -{ - u32 tmp; - tmp = readl(SSCC); - tmp |= SSCC_ON; - writel(tmp, SSCC); -} -#endif - -void v7_outer_cache_disable(void) -{ - u32 tmp; - tmp = readl(SSCC); - tmp &= ~SSCC_ON; - writel(tmp, SSCC); -} - -void wakeup_secondary(void); - -void enable_caches(void) -{ - uint32_t reg; - -#ifdef CONFIG_UNIPHIER_SMP - /* - * The secondary CPU must move to DDR, - * before L2 disable. - * On SPL, the Page Table is located on the L2. - */ - wakeup_secondary(); -#endif - /* - * UniPhier SoCs must use L2 cache for init stack pointer. - * We disable L2 and L1 in this order. - * If CONFIG_SYS_DCACHE_OFF is not defined, - * caches are enabled again with a new page table. - */ - - /* L2 disable */ - v7_outer_cache_disable(); - - /* L1 disable */ - reg = get_cr(); - reg &= ~(CR_C | CR_M); - set_cr(reg); - -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} diff --git a/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c b/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c deleted file mode 100644 index 431d901..0000000 --- a/arch/arm/cpu/armv7/uniphier/cmd_ddrphy.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* Select either decimal or hexadecimal */ -#if 1 -#define PRINTF_FORMAT "%2d" -#else -#define PRINTF_FORMAT "%02x" -#endif -/* field separator */ -#define FS " " - -static u32 read_bdl(struct ddrphy_datx8 __iomem *dx, int index) -{ - return (readl(&dx->bdlr[index / 5]) >> (index % 5 * 6)) & 0x3f; -} - -static void dump_loop(void (*callback)(struct ddrphy_datx8 __iomem *)) -{ - int ch, p, dx; - struct ddrphy __iomem *phy; - - for (ch = 0; ch < NR_DDRCH; ch++) { - for (p = 0; p < NR_DDRPHY_PER_CH; p++) { - phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); - - for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { - printf("CH%dP%dDX%d:", ch, p, dx); - (*callback)(&phy->dx[dx]); - printf("\n"); - } - } - } -} - -static void __wbdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - - for (i = 0; i < 10; i++) - printf(FS PRINTF_FORMAT, read_bdl(dx, i)); - - printf(FS "(+" PRINTF_FORMAT ")", readl(&dx->lcdlr[1]) & 0xff); -} - -void wbdl_dump(void) -{ - printf("\n--- Write Bit Delay Line ---\n"); - printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM DQS (WDQD)\n"); - - dump_loop(&__wbdl_dump); -} - -static void __rbdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - - for (i = 15; i < 24; i++) - printf(FS PRINTF_FORMAT, read_bdl(dx, i)); - - printf(FS "(+" PRINTF_FORMAT ")", (readl(&dx->lcdlr[1]) >> 8) & 0xff); -} - -void rbdl_dump(void) -{ - printf("\n--- Read Bit Delay Line ---\n"); - printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM (RDQSD)\n"); - - dump_loop(&__rbdl_dump); -} - -static void __wld_dump(struct ddrphy_datx8 __iomem *dx) -{ - int rank; - u32 lcdlr0 = readl(&dx->lcdlr[0]); - u32 gtr = readl(&dx->gtr); - - for (rank = 0; rank < 4; rank++) { - u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */ - u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */ - - printf(FS PRINTF_FORMAT "%sT", wld, - wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1"); - } -} - -void wld_dump(void) -{ - printf("\n--- Write Leveling Delay ---\n"); - printf(" Rank0 Rank1 Rank2 Rank3\n"); - - dump_loop(&__wld_dump); -} - -static void __dqsgd_dump(struct ddrphy_datx8 __iomem *dx) -{ - int rank; - u32 lcdlr2 = readl(&dx->lcdlr[2]); - u32 gtr = readl(&dx->gtr); - - for (rank = 0; rank < 4; rank++) { - u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */ - u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */ - - printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl); - } -} - -void dqsgd_dump(void) -{ - printf("\n--- DQS Gating Delay ---\n"); - printf(" Rank0 Rank1 Rank2 Rank3\n"); - - dump_loop(&__dqsgd_dump); -} - -static void __mdl_dump(struct ddrphy_datx8 __iomem *dx) -{ - int i; - u32 mdl = readl(&dx->mdlr); - for (i = 0; i < 3; i++) - printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff); -} - -void mdl_dump(void) -{ - printf("\n--- Master Delay Line ---\n"); - printf(" IPRD TPRD MDLD\n"); - - dump_loop(&__mdl_dump); -} - -#define REG_DUMP(x) \ - { u32 __iomem *p = &phy->x; printf("%3d: %-10s: %p : %08x\n", \ - p - (u32 *)phy, #x, p, readl(p)); } - -void reg_dump(void) -{ - int ch, p; - struct ddrphy __iomem *phy; - - printf("\n--- DDR PHY registers ---\n"); - - for (ch = 0; ch < NR_DDRCH; ch++) { - for (p = 0; p < NR_DDRPHY_PER_CH; p++) { - printf("== Ch%d, PHY%d ==\n", ch, p); - printf(" No: Name : Address : Data\n"); - - phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); - - REG_DUMP(ridr); - REG_DUMP(pir); - REG_DUMP(pgcr[0]); - REG_DUMP(pgcr[1]); - REG_DUMP(pgsr[0]); - REG_DUMP(pgsr[1]); - REG_DUMP(pllcr); - REG_DUMP(ptr[0]); - REG_DUMP(ptr[1]); - REG_DUMP(ptr[2]); - REG_DUMP(ptr[3]); - REG_DUMP(ptr[4]); - REG_DUMP(acmdlr); - REG_DUMP(acbdlr); - REG_DUMP(dxccr); - REG_DUMP(dsgcr); - REG_DUMP(dcr); - REG_DUMP(dtpr[0]); - REG_DUMP(dtpr[1]); - REG_DUMP(dtpr[2]); - REG_DUMP(mr0); - REG_DUMP(mr1); - REG_DUMP(mr2); - REG_DUMP(mr3); - REG_DUMP(dx[0].gcr); - REG_DUMP(dx[0].gtr); - REG_DUMP(dx[1].gcr); - REG_DUMP(dx[1].gtr); - } - } -} - -static int do_ddr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *cmd = argv[1]; - - if (argc == 1) - cmd = "all"; - - if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all")) - wbdl_dump(); - - if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all")) - rbdl_dump(); - - if (!strcmp(cmd, "wld") || !strcmp(cmd, "all")) - wld_dump(); - - if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all")) - dqsgd_dump(); - - if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all")) - mdl_dump(); - - if (!strcmp(cmd, "reg") || !strcmp(cmd, "all")) - reg_dump(); - - return 0; -} - -U_BOOT_CMD( - ddr, 2, 1, do_ddr, - "UniPhier DDR PHY parameters dumper", - "- dump all of the followings\n" - "ddr wbdl - dump Write Bit Delay\n" - "ddr rbdl - dump Read Bit Delay\n" - "ddr wld - dump Write Leveling\n" - "ddr dqsgd - dump DQS Gating Delay\n" - "ddr mdl - dump Master Delay Line\n" - "ddr reg - dump registers\n" -); diff --git a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c deleted file mode 100644 index 3c1b325..0000000 --- a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int mode_sel, i; - - printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); - - mode_sel = get_boot_mode_sel(); - - puts("Boot Mode Pin:\n"); - - for (i = 0; boot_device_table[i].info; i++) - printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, - boot_device_table[i].info); - - return 0; -} - -U_BOOT_CMD( - pinmon, 1, 1, do_pinmon, - "pin monitor", - "" -); diff --git a/arch/arm/cpu/armv7/uniphier/cpu_info.c b/arch/arm/cpu/armv7/uniphier/cpu_info.c deleted file mode 100644 index 86d079a..0000000 --- a/arch/arm/cpu/armv7/uniphier/cpu_info.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2013-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -int print_cpuinfo(void) -{ - u32 revision, type, model, rev, required_model = 1, required_rev = 1; - - revision = readl(SG_REVISION); - type = (revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT; - model = (revision & SG_REVISION_MODEL_MASK) >> SG_REVISION_MODEL_SHIFT; - rev = (revision & SG_REVISION_REV_MASK) >> SG_REVISION_REV_SHIFT; - - puts("CPU: "); - - switch (type) { - case 0x25: - puts("PH1-sLD3 (MN2WS0220)"); - required_model = 2; - break; - case 0x26: - puts("PH1-LD4 (MN2WS0250)"); - required_rev = 2; - break; - case 0x28: - puts("PH1-Pro4 (MN2WS0230)"); - break; - case 0x29: - puts("PH1-sLD8 (MN2WS0270)"); - break; - default: - printf("Unknown Processor ID (0x%x)\n", revision); - return -1; - } - - if (model > 1) - printf(" model %d", model); - - printf(" (rev. %d)\n", rev); - - if (model < required_model) { - printf("Sorry, this model is not supported.\n"); - printf("Required model is %d.", required_model); - return -1; - } else if (rev < required_rev) { - printf("Sorry, this revision is not supported.\n"); - printf("Required revision is %d.", required_rev); - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/ddrphy_training.c b/arch/arm/cpu/armv7/uniphier/ddrphy_training.c deleted file mode 100644 index cc8b8ad..0000000 --- a/arch/arm/cpu/armv7/uniphier/ddrphy_training.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) -{ - int dx; - u32 __iomem tmp, *p; - - for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { - p = &phy->dx[dx].gcr; - - tmp = readl(p); - /* Specify the rank that should be write leveled */ - tmp &= ~DXGCR_WLRKEN_MASK; - tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; - writel(tmp, p); - } - - p = &phy->dtcr; - - tmp = readl(p); - /* Specify the rank used during data bit deskew and eye centering */ - tmp &= ~DTCR_DTRANK_MASK; - tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; - /* Use Multi-Purpose Register for DQS gate training */ - tmp |= DTCR_DTMPR; - /* Specify the rank enabled for data-training */ - tmp &= ~DTCR_RNKEN_MASK; - tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; - writel(tmp, p); -} - -struct ddrphy_init_sequence { - char *description; - u32 init_flag; - u32 done_flag; - u32 err_flag; -}; - -static struct ddrphy_init_sequence init_sequence[] = { - { - "DRAM Initialization", - PIR_DRAMRST | PIR_DRAMINIT, - PGSR0_DIDONE, - PGSR0_DIERR - }, - { - "Write Leveling", - PIR_WL, - PGSR0_WLDONE, - PGSR0_WLERR - }, - { - "Read DQS Gate Training", - PIR_QSGATE, - PGSR0_QSGDONE, - PGSR0_QSGERR - }, - { - "Write Leveling Adjustment", - PIR_WLADJ, - PGSR0_WLADONE, - PGSR0_WLAERR - }, - { - "Read Bit Deskew", - PIR_RDDSKW, - PGSR0_RDDONE, - PGSR0_RDERR - }, - { - "Write Bit Deskew", - PIR_WRDSKW, - PGSR0_WDDONE, - PGSR0_WDERR - }, - { - "Read Eye Training", - PIR_RDEYE, - PGSR0_REDONE, - PGSR0_REERR - }, - { - "Write Eye Training", - PIR_WREYE, - PGSR0_WEDONE, - PGSR0_WEERR - } -}; - -int ddrphy_training(struct ddrphy __iomem *phy) -{ - int i; - u32 pgsr0; - u32 init_flag = PIR_INIT; - u32 done_flag = PGSR0_IDONE; - int timeout = 50000; /* 50 msec is long enough */ -#ifdef DISPLAY_ELAPSED_TIME - ulong start = get_timer(0); -#endif - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - init_flag |= init_sequence[i].init_flag; - done_flag |= init_sequence[i].done_flag; - } - - writel(init_flag, &phy->pir); - - do { - if (--timeout < 0) { -#ifndef CONFIG_SPL_BUILD - printf("%s: error: timeout during DDR training\n", - __func__); -#endif - return -1; - } - udelay(1); - pgsr0 = readl(&phy->pgsr[0]); - } while ((pgsr0 & done_flag) != done_flag); - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - if (pgsr0 & init_sequence[i].err_flag) { -#ifndef CONFIG_SPL_BUILD - printf("%s: error: %s failed\n", __func__, - init_sequence[i].description); -#endif - return -1; - } - } - -#ifdef DISPLAY_ELAPSED_TIME - printf("%s: info: elapsed time %ld msec\n", get_timer(start)); -#endif - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c deleted file mode 100644 index 4b8c938..0000000 --- a/arch/arm/cpu/armv7/uniphier/dram_init.c +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.S b/arch/arm/cpu/armv7/uniphier/init_page_table.S deleted file mode 100644 index 2638bcd..0000000 --- a/arch/arm/cpu/armv7/uniphier/init_page_table.S +++ /dev/null @@ -1,26 +0,0 @@ -#include -#include - -/* page table */ -#define NR_SECTIONS 4096 -#define SECTION_SHIFT 20 -#define DEVICE 0x00002002 /* Non-shareable Device */ -#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */ - -#define TEXT_SECTION ((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT)) -#define STACK_SECTION ((CONFIG_SYS_INIT_SP_ADDR) >> (SECTION_SHIFT)) - - .section ".rodata" - .align 14 -ENTRY(init_page_table) - section = 0 - .rept NR_SECTIONS - .if section == TEXT_SECTION || section == STACK_SECTION - attr = NORMAL - .else - attr = DEVICE - .endif - .word (section << SECTION_SHIFT) | attr - section = section + 1 - .endr -END(init_page_table) diff --git a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S deleted file mode 100644 index c208ab6..0000000 --- a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -ENTRY(lowlevel_init) - mov r8, lr @ persevere link reg across call - - /* - * The UniPhier Boot ROM loads SPL code to the L2 cache. - * But CPUs can only do instruction fetch now because start.S has - * cleared C and M bits. - * First we need to turn on MMU and Dcache again to get back - * data access to L2. - */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache - mcr p15, 0, r0, c1, c0, 0 - -#ifdef CONFIG_DEBUG_LL - bl setup_lowlevel_debug -#endif - - /* - * Now we are using the page table embedded in the Boot ROM. - * It is not handy since it is not a straight mapped table for sLD3. - * What we need to do next is to switch over to the page table in SPL. - */ - ldr r3, =init_page_table @ page table must be 16KB aligned - - /* Disable MMU and Dcache before switching Page Table */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache - mcr p15, 0, r0, c1, c0, 0 - - bl enable_mmu - -#ifdef CONFIG_UNIPHIER_SMP - /* - * ACTLR (Auxiliary Control Register) for Cortex-A9 - * bit[9] Parity on - * bit[8] Alloc in one way - * bit[7] EXCL (Exclusive cache bit) - * bit[6] SMP - * bit[3] Write full line of zeros mode - * bit[2] L1 Prefetch enable - * bit[1] L2 prefetch enable - * bit[0] FW (Cache and TLB maintenance broadcast) - */ - mrc p15, 0, r0, c1, c0, 1 @ ACTLR (Auxiliary Control Register) - orr r0, r0, #0x41 @ enable SMP, FW bit - mcr p15, 0, r0, c1, c0, 1 - - /* branch by CPU ID */ - mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register) - and r0, r0, #0x3 - cmp r0, #0x0 - beq primary_cpu - ldr r1, =ROM_BOOT_ROMRSV2 - mov r0, #0 - str r0, [r1] -0: wfe - ldr r0, [r1] - cmp r0, #0 - beq 0b - bx r0 @ r0: entry point of U-Boot main for the secondary CPU -primary_cpu: - ldr r1, =ROM_BOOT_ROMRSV2 - ldr r0, =_start @ entry for the secondary CPU - str r0, [r1] - ldr r0, [r1] @ make sure str is complete before sev - sev @ kick the sedoncary CPU - mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register - bfc r1, #0, #13 @ clear bit 12-0 - mov r0, #-1 - str r0, [r1, #SCU_INV_ALL] @ SCU Invalidate All Register - mov r0, #1 @ SCU enable - str r0, [r1, #SCU_CTRL] @ SCU Control Register -#endif - - bl setup_init_ram @ RAM area for temporary stack pointer - - mov lr, r8 @ restore link - mov pc, lr @ back to my caller -ENDPROC(lowlevel_init) - -ENTRY(enable_mmu) - mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register) - bic r0, r0, #0x37 - orr r0, r0, #0x20 @ disable TTBR1 - mcr p15, 0, r0, c2, c0, 2 - - orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA - mcr p15, 0, r0, c2, c0, 0 @ TTBR0 - - mov r0, #0 - mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs - - mov r0, #-1 @ manager for all domains (No permission check) - mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register) - - dsb - isb - /* - * MMU on: - * TLBs was already invalidated in "../start.S" - * So, we don't need to invalidate it here. - */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable - mcr p15, 0, r0, c1, c0, 0 - - mov pc, lr -ENDPROC(enable_mmu) - -#include - -#define BOOT_RAM_SIZE (SSC_WAY_SIZE) -#define BOOT_WAY_BITS (0x00000100) /* way 8 */ - -ENTRY(setup_init_ram) - /* - * Touch to zero for the boot way - */ -0: - /* - * set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order - */ - ldr r0, = 0x00408006 @ touch to zero with address range - ldr r1, = SSCOQM - str r0, [r1] - ldr r0, = (CONFIG_SYS_INIT_SP_ADDR - BOOT_RAM_SIZE) @ base address - ldr r1, = SSCOQAD - str r0, [r1] - ldr r0, = BOOT_RAM_SIZE - ldr r1, = SSCOQSZ - str r0, [r1] - ldr r0, = BOOT_WAY_BITS - ldr r1, = SSCOQWN - str r0, [r1] - ldr r1, = SSCOPPQSEF - ldr r0, [r1] - cmp r0, #0 @ check if the command is successfully set - bne 0b @ try again if an error occurres - - ldr r1, = SSCOLPQS -1: - ldr r0, [r1] - cmp r0, #0x4 - bne 1b @ wait until the operation is completed - str r0, [r1] @ clear the complete notification flag - - mov pc, lr -ENDPROC(setup_init_ram) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile deleted file mode 100644 index 72f4663..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c deleted file mode 100644 index 85f37f2..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) - -void bcu_init(void) -{ - int shift; - - writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ - writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ - - /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; - writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c deleted file mode 100644 index d359b56..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c deleted file mode 100644 index 18965a9..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c deleted file mode 100644 index 60fc5ad..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8253c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a82dbc0, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000800, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S deleted file mode 100644 index c0778a0..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#define UART_CLK 36864000 -#include - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c deleted file mode 100644 index a742940..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void pin_init(void) -{ - u32 tmp; - - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ -#endif - - tmp = readl(SG_IECTRL); - tmp |= 0x41; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c deleted file mode 100644 index 9d51299..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#define UART_MASTER_CLK 36864000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, - { - .base = 0x5a820100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c deleted file mode 100644 index b83582f..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT (DPLLCTRL.bit[29:20]) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif - -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~SC_DPLLCTRL_SSC_RATE; -#else - tmp |= SC_DPLLCTRL_SSC_RATE; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c deleted file mode 100644 index 837b2a8..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c deleted file mode 100644 index 4839c94..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - -#if !defined(CONFIG_SPL_BUILD) - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - -#if !defined(CONFIG_SPL_BUILD) - /* enable access to sub memory when boot swap is on */ - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ -#endif - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c deleted file mode 100644 index 2cc5df6..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void sg_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 0x1; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c deleted file mode 100644 index bbc3dcb..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - if (freq == 1333) { - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x000FF0FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - } else if (freq == 1600) { - writel(0x36BB0F17, dramcont + UMC_CMDCTLA); - writel(0x18C6AA24, dramcont + UMC_CMDCTLB); - writel(0x5101387F, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x2F030D3F, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x43030D3F, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - } - - writel(0x00000006, dramcont + UMC_DRMMR1); - - if (freq == 1333) - writel(0x00000290, dramcont + UMC_DRMMR2); - else if (freq == 1600) - writel(0x00000298, dramcont + UMC_DRMMR2); - - writel(0x00000800, dramcont + UMC_DRMMR3); - - if (freq == 1333) { - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - } else if (freq == 1600) { - if (size == 1) - writel(0x002B0617, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x003F0617, dramcont + UMC_SPCCTLA); - - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - } - - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile deleted file mode 100644 index e330fda..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c deleted file mode 100644 index c31b74b..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct boot_device_info boot_device_table[] = { - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } -}; - -int get_boot_mode_sel(void) -{ - return (readl(SG_PINMON0) >> 1) & 0x1f; -} - -u32 spl_boot_device(void) -{ - int boot_mode; - - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - - boot_mode = get_boot_mode_sel(); - - return boot_device_table[boot_mode].type; -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c deleted file mode 100644 index 18965a9..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c deleted file mode 100644 index c5d1f60..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000000, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index a793b7c..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define UART_CLK 73728000 -#include - -ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CLK_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index 4e3d476..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c deleted file mode 100644 index 31ee2a2..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#define UART_MASTER_CLK 73728000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c deleted file mode 100644 index 1db90f8..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT ( DPLLCTRL.bit[29:20] ) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif - - /* - * Set Moduration rate - * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) - */ -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~0x00008000; -#else - tmp |= 0x00008000; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void stop_mpll(void) -{ - u32 tmp; - - tmp = readl(SC_MPLLOSCCTL); - - if (!(tmp & SC_MPLLOSCCTL_MPLLST)) - return; /* already stopped */ - - tmp &= ~SC_MPLLOSCCTL_MPLLEN; - writel(tmp, SC_MPLLOSCCTL); - - while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST) - ; -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - /* Set VPLL27A & VPLL27B */ - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - -#if defined(CONFIG_MACH_PH1_PRO4) - /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) - return; -#endif - - /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { - /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* wait 1 usec */ - udelay(1); - - /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - stop_mpll(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 1 usec in vpll_init() so 1 usec can be saved here. - */ - udelay(499); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c deleted file mode 100644 index 4538d1a..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void enable_dpll_ssc(void) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c deleted file mode 100644 index 3c82a1a..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. - * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x3effffff: memory bank (31MB) - * 0x03f00000-0x3fffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -#if !defined(CONFIG_SPL_BUILD) - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - -#if !defined(CONFIG_SPL_BUILD) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ -#endif - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); - -#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index b7c4b10..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void sg_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c deleted file mode 100644 index 2d1bde6..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000001, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x07ffffff, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - - writel(0x03010100, ssif_base + UMC_HDMCHSEL); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DVCCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_HDMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_HDDRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_GIORST); - writel(0x00000001, ssif_base + UMC_HD2RST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_DVCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_VPERST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - writel(0x66bb0f17, dramcont + UMC_CMDCTLA); - writel(0x18c6aa44, dramcont + UMC_CMDCTLB); - writel(0x5101387f, dramcont + UMC_INITCTLA); - writel(0x43030d3f, dramcont + UMC_INITCTLB); - writel(0x00ff00ff, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000298, dramcont + UMC_DRMMR2); - writel(0x00000000, dramcont + UMC_DRMMR3); - writel(0x003f0617, dramcont + UMC_SPCCTLA); - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); - writel(0x04060802, dramcont + UMC_WDATACTL_D0); - writel(0x04060802, dramcont + UMC_WDATACTL_D1); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x0000000f, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x00000000, dramcont + 0x0060); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00010000, dramcont + UMC_SPCSETD); - writel(0x80000020, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000103, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_1, freq, size_ch0); - - ddrphy_prepare_training(phy0_1, 1); - ddrphy_training(phy0_1); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 0); - ddrphy_training(phy1_0); - - writel(0x00000103, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_1, freq, size_ch1); - - ddrphy_prepare_training(phy1_1, 1); - ddrphy_training(phy1_1); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile deleted file mode 100644 index 72f4663..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c deleted file mode 100644 index 69b172e..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c deleted file mode 100644 index d359b56..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c deleted file mode 100644 index 18965a9..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c deleted file mode 100644 index a5eafef..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, &phy->mr3); -#else - writel(0x00000800, &phy->mr3); -#endif - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S deleted file mode 100644 index a413e5f..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#define UART_CLK 80000000 -#include - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c deleted file mode 100644 index 5e80335..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif - -#ifdef CONFIG_SYS_I2C_UNIPHIER - { - u32 tmp; - tmp = readl(SG_IECTRL); - tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ - writel(tmp, SG_IECTRL); - } -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 4); */ /* RXD1 -> USB2OD */ -#endif -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c deleted file mode 100644 index ea0691d..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#define UART_MASTER_CLK 80000000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, - { - .base = 0x5a820100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c deleted file mode 100644 index 4b82700..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void dpll_init(void) -{ - u32 tmp; - /* - * Set DPLL SSC parameters for DPLLCTRL3 - * [23] DIVN_TEST 0x1 - * [22:16] DIVN 0x50 - * [10] FREFSEL_TEST 0x1 - * [9:8] FREFSEL 0x2 - * [4] ICPD_TEST 0x1 - * [3:0] ICPD 0xb - */ - tmp = readl(SC_DPLLCTRL3); - tmp &= ~0x00ff0717; - tmp |= 0x00d0061b; - writel(tmp, SC_DPLLCTRL3); - - /* - * Set DPLL SSC parameters for DPLLCTRL - * <-1%> <-2%> - * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) - * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x3ff07fff; -#ifdef CONFIG_DPLL_SSC_RATE_1PER - tmp |= 0x084018bf; -#else - tmp |= 0x084031a6; -#endif - writel(tmp, SC_DPLLCTRL); - - /* - * Set DPLL SSC parameters for DPLLCTRL2 - * [31:29] SSC_STEP 0 - * [27] SSC_REG_REF 1 - * [26:20] SSC_M 79 (0x4f) - * [19:0] SSC_K 964689 (0xeb851) - */ - tmp = readl(SC_DPLLCTRL2); - tmp &= ~0xefffffff; - tmp |= 0x0cfeb851; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c deleted file mode 100644 index 9b8c485..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c deleted file mode 100644 index 5efee9c..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - -#if !defined(CONFIG_SPL_BUILD) - /* XECS0 : dummy */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1 : boot memory (always boot swap = on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(33)); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c deleted file mode 100644 index a808289..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c deleted file mode 100644 index 2fbc73a..0000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ -#ifdef CONFIG_DDR_STANDARD - writel(0x55990b11, dramcont + UMC_CMDCTLA); - writel(0x16958944, dramcont + UMC_CMDCTLB); -#else - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); -#endif - - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000290, dramcont + UMC_DRMMR2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, dramcont + UMC_DRMMR3); -#else - writel(0x00000800, dramcont + UMC_DRMMR3); -#endif - - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000004f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000077, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/cpu/armv7/uniphier/print_misc_info.c b/arch/arm/cpu/armv7/uniphier/print_misc_info.c deleted file mode 100644 index 69cfab5..0000000 --- a/arch/arm/cpu/armv7/uniphier/print_misc_info.c +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Copyright (C) 2015 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -int misc_init_f(void) -{ - return check_support_card(); -} diff --git a/arch/arm/cpu/armv7/uniphier/reset.c b/arch/arm/cpu/armv7/uniphier/reset.c deleted file mode 100644 index 50d1fed..0000000 --- a/arch/arm/cpu/armv7/uniphier/reset.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void reset_cpu(unsigned long ignored) -{ - u32 tmp; - - writel(5, SC_IRQTIMSET); /* default value */ - - tmp = readl(SC_SLFRSTSEL); - tmp &= ~0x3; /* mask [1:0] */ - tmp |= 0x0; /* XRST reboot */ - writel(tmp, SC_SLFRSTSEL); - - tmp = readl(SC_SLFRSTCTL); - tmp |= 0x1; - writel(tmp, SC_SLFRSTCTL); -} diff --git a/arch/arm/cpu/armv7/uniphier/smp.S b/arch/arm/cpu/armv7/uniphier/smp.S deleted file mode 100644 index 25ba981..0000000 --- a/arch/arm/cpu/armv7/uniphier/smp.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2013 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/* Entry point of U-Boot main program for the secondary CPU */ -LENTRY(secondary_entry) - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache disable - mcr p15, 0, r0, c1, c0, 0 - mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs - mcr p15, 0, r0, c7, c5, 0 @ invalidate icache - dsb - led_write(C,0,,) - ldr r1, =ROM_BOOT_ROMRSV2 - mov r0, #0 - str r0, [r1] -0: wfe - ldr r4, [r1] @ r4: entry point for secondary CPUs - cmp r4, #0 - beq 0b - led_write(C, P, U, 1) - bx r4 @ secondary CPUs jump to linux -ENDPROC(secondary_entry) - -ENTRY(wakeup_secondary) - ldr r1, =ROM_BOOT_ROMRSV2 -0: ldr r0, [r1] - cmp r0, #0 - bne 0b - - /* set entry address and send event to the secondary CPU */ - ldr r0, =secondary_entry - str r0, [r1] - ldr r0, [r1] @ make sure store is complete - mov r0, #0x100 -0: subs r0, r0, #1 @ I don't know the reason, but without this wait - bne 0b @ fails to wake up the secondary CPU - sev - - /* wait until the secondary CPU reach to secondary_entry */ -0: ldr r0, [r1] - cmp r0, #0 - bne 0b - bx lr -ENDPROC(wakeup_secondary) diff --git a/arch/arm/cpu/armv7/uniphier/spl.c b/arch/arm/cpu/armv7/uniphier/spl.c deleted file mode 100644 index 8a4eafc..0000000 --- a/arch/arm/cpu/armv7/uniphier/spl.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2013-2015 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -void __weak bcu_init(void) -{ -}; -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void clkrst_init(void); -int umc_init(void); -void enable_dpll_ssc(void); - -void spl_board_init(void) -{ - bcu_init(); - - sbc_init(); - - sg_init(); - - uniphier_board_reset(); - - pll_init(); - - uniphier_board_init(); - - led_write(L, 0, , ); - - clkrst_init(); - - led_write(L, 1, , ); - - { - int res; - - res = umc_init(); - if (res < 0) { - while (1) - ; - } - } - led_write(L, 2, , ); - - enable_dpll_ssc(); - - led_write(L, 3, , ); -} diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c deleted file mode 100644 index 443224c..0000000 --- a/arch/arm/cpu/armv7/uniphier/support_card.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - -#define PFC_MICRO_SUPPORT_CARD_RESET \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) -/* - * 0: reset deassert, 1: reset - * - * bit[0]: LAN, I2C, LED - * bit[1]: UART - */ -void support_card_reset_deassert(void) -{ - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); -} - -void support_card_reset(void) -{ - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); - return 0; -} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif - -int check_support_card(void) -{ - printf("SC: Micro Support Card "); - return support_card_show_revision(); -} - -void support_card_init(void) -{ - /* - * After power on, we need to keep the LAN controller in reset state - * for a while. (200 usec) - * Fortunatelly, enough wait time is already inserted in pll_init() - * function. So we do not have to wait here. - */ - support_card_reset_deassert(); -} - -#if defined(CONFIG_SMC911X) -#include - -int board_eth_init(bd_t *bis) -{ - return smc911x_initialize(0, CONFIG_SMC911X_BASE); -} -#endif - -#if !defined(CONFIG_SYS_NO_FLASH) - -#include -#include - -struct memory_bank { - phys_addr_t base; - unsigned long size; -}; - -static int mem_is_flash(const struct memory_bank *mem) -{ - const int loop = 128; - u32 *scratch_addr; - u32 saved_value; - int ret = 1; - int i; - - /* just in case, use the tail of the memory bank */ - scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, - sizeof(u32) * loop, MAP_NOCACHE); - - for (i = 0; i < loop; i++, scratch_addr++) { - saved_value = readl(scratch_addr); - writel(~saved_value, scratch_addr); - if (readl(scratch_addr) != saved_value) { - /* We assume no memory or SRAM here. */ - writel(saved_value, scratch_addr); - ret = 0; - break; - } - } - - unmap_physmem(scratch_addr, MAP_NOCACHE); - - return ret; -} - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x02000000, 0x01f00000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, -}; -#endif - -static const struct memory_bank -*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; - -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]->base; -} - -unsigned long cfi_flash_bank_size(int i) -{ - return flash_banks_list[i]->size; -} - -static void detect_num_flash_banks(void) -{ - const struct memory_bank *memory_bank, *end; - - cfi_flash_num_flash_banks = 0; - - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } - - for (; memory_bank < end; memory_bank++) { - if (cfi_flash_num_flash_banks >= - CONFIG_SYS_MAX_FLASH_BANKS_DETECT) - break; - - if (mem_is_flash(memory_bank)) { - flash_banks_list[cfi_flash_num_flash_banks] = - memory_bank; - - debug("flash bank found: base = 0x%lx, size = 0x%lx\n", - memory_bank->base, memory_bank->size); - cfi_flash_num_flash_banks++; - } - } - - debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); -} -#else /* ONFIG_SYS_NO_FLASH */ -void detect_num_flash_banks(void) -{ -}; -#endif /* ONFIG_SYS_NO_FLASH */ - -void support_card_late_init(void) -{ - detect_num_flash_banks(); -} diff --git a/arch/arm/cpu/armv7/uniphier/timer.c b/arch/arm/cpu/armv7/uniphier/timer.c deleted file mode 100644 index 6edc084..0000000 --- a/arch/arm/cpu/armv7/uniphier/timer.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */ -#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1) - -static void *get_global_timer_base(void) -{ - void *val; - - asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (val) : : "memory"); - - return val + GLOBAL_TIMER_OFFSET; -} - -unsigned long timer_read_counter(void) -{ - /* - * ARM 64bit Global Timer is too much for our purpose. - * We use only lower 32 bit of the timer counter. - */ - return readl(get_global_timer_base() + GTIMER_CNT_L); -} - -int timer_init(void) -{ - /* enable timer */ - writel(PRESCALER << 8 | 1, get_global_timer_base() + GTIMER_CTRL); - - return 0; -} diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig new file mode 100644 index 0000000..8335685 --- /dev/null +++ b/arch/arm/mach-uniphier/Kconfig @@ -0,0 +1,89 @@ +menu "Panasonic UniPhier platform" + depends on ARCH_UNIPHIER + +config SYS_SOC + default "uniphier" + +config SYS_CONFIG_NAME + default "uniphier" + +config UNIPHIER_SMP + bool + +choice + prompt "UniPhier SoC select" + +config MACH_PH1_PRO4 + bool "PH1-Pro4" + select UNIPHIER_SMP + +config MACH_PH1_LD4 + bool "PH1-LD4" + +config MACH_PH1_SLD8 + bool "PH1-sLD8" + +endchoice + +choice + prompt "UniPhier Support Card select" + optional + +config PFC_MICRO_SUPPORT_CARD + bool "Support card with PFC CPLD" + help + This option provides support for the expansion board with PFC + original address mapping. + + Say Y to use the on-board UART, Ether, LED devices. + +config DCC_MICRO_SUPPORT_CARD + bool "Support card with DCC CPLD" + help + This option provides support for the expansion board with DCC- + arranged address mapping that is compatible with legacy UniPhier + reference boards. + + Say Y to use the on-board UART, Ether, LED devices. + +endchoice + +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x400 + +config CMD_PINMON + bool "Enable boot mode pins monitor command" + default y + help + The command "pinmon" shows the state of the boot mode pins. + The boot mode pins are latched when the system reset is deasserted + and determine which device the system should load a boot image from. + +config CMD_DDRPHY_DUMP + bool "Enable dump command of DDR PHY parameters" + help + The command "ddrphy" shows the resulting parameters of DDR PHY + training; it is useful for the evaluation of DDR PHY training. + +choice + prompt "DDR3 Frequency select" + +config DDR_FREQ_1600 + bool "DDR3 1600" + depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + +config DDR_FREQ_1333 + bool "DDR3 1333" + depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + +endchoice + +config DDR_FREQ + int + default 1333 if DDR_FREQ_1333 + default 1600 if DDR_FREQ_1600 + +endmenu diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile new file mode 100644 index 0000000..df418dd --- /dev/null +++ b/arch/arm/mach-uniphier/Makefile @@ -0,0 +1,36 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD + +obj-y += lowlevel_init.o +obj-y += init_page_table.o +obj-y += spl.o +obj-y += ddrphy_training.o + +else + +obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o +obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o +obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o +obj-y += dram_init.o +obj-y += board_common.o +obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o +obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o +obj-y += reset.o +obj-y += cache_uniphier.o +obj-$(CONFIG_UNIPHIER_SMP) += smp.o +obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o +obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o + +endif + +obj-y += timer.o + +obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o + +obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ +obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ +obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c new file mode 100644 index 0000000..3fb26c6 --- /dev/null +++ b/arch/arm/mach-uniphier/board_common.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + led_write(U, B, O, O); + + return 0; +} + +#if CONFIG_NR_DRAM_BANKS >= 2 +void dram_init_banksize(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; + gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; + gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; +} +#endif diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c new file mode 100644 index 0000000..d25bbae --- /dev/null +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012-2015 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +void pin_init(void); + +int board_early_init_f(void) +{ + led_write(U, 0, , ); + + pin_init(); + + led_write(U, 1, , ); + + return 0; +} diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c new file mode 100644 index 0000000..cb7e04f --- /dev/null +++ b/arch/arm/mach-uniphier/board_early_init_r.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +int board_early_init_r(void) +{ + uniphier_board_late_init(); + return 0; +} diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c new file mode 100644 index 0000000..0622a1e --- /dev/null +++ b/arch/arm/mach-uniphier/board_late_init.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include <../drivers/mtd/nand/denali.h> + +static void nand_denali_wp_disable(void) +{ +#ifdef CONFIG_NAND_DENALI + /* + * Since the boot rom enables the write protection for NAND boot mode, + * it must be disabled somewhere for "nand write", "nand erase", etc. + * The workaround is here to not disturb the Denali NAND controller + * driver just for a really SoC-specific thing. + */ + void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + + writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT); +#endif +} + +int board_late_init(void) +{ + puts("MODE: "); + + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: + printf("eMMC Boot\n"); + setenv("bootmode", "emmcboot"); + break; + case BOOT_DEVICE_NAND: + printf("NAND Boot\n"); + setenv("bootmode", "nandboot"); + nand_denali_wp_disable(); + break; + case BOOT_DEVICE_NOR: + printf("NOR Boot\n"); + setenv("bootmode", "norboot"); + break; + default: + printf("Unsupported Boot Mode\n"); + return -1; + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/cache_uniphier.c b/arch/arm/mach-uniphier/cache_uniphier.c new file mode 100644 index 0000000..e47f977 --- /dev/null +++ b/arch/arm/mach-uniphier/cache_uniphier.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#ifdef CONFIG_UNIPHIER_L2CACHE_ON +static void uniphier_cache_maint_all(u32 operation) +{ + /* try until the command is successfully set */ + do { + writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM); + } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); + + /* wait until the operation is completed */ + while (readl(SSCOLPQS) != SSCOLPQS_EF) + ; + + /* clear the complete notification flag */ + writel(SSCOLPQS_EF, SSCOLPQS); + + writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ + readl(SSCOPE); /* need a read back to confirm */ +} + +void v7_outer_cache_flush_all(void) +{ + uniphier_cache_maint_all(SSCOQM_CM_WB_INV); +} + +void v7_outer_cache_inval_all(void) +{ + uniphier_cache_maint_all(SSCOQM_CM_INV); +} + +static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation) +{ + /* try until the command is successfully set */ + do { + writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM); + writel(start, SSCOQAD); + writel(size, SSCOQSZ); + + } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); + + /* wait until the operation is completed */ + while (readl(SSCOLPQS) != SSCOLPQS_EF) + ; + + /* clear the complete notification flag */ + writel(SSCOLPQS_EF, SSCOLPQS); +} + +static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) +{ + u32 size; + + /* + * If start address is not aligned to cache-line, + * do cache operation for the first cache-line + */ + start = start & ~(SSC_LINE_SIZE - 1); + + if (start == 0 && end >= (u32)(-SSC_LINE_SIZE)) { + /* this means cache operation for all range */ + uniphier_cache_maint_all(operation); + return; + } + + /* + * If end address is not aligned to cache-line, + * do cache operation for the last cache-line + */ + size = (end - start + SSC_LINE_SIZE - 1) & ~(SSC_LINE_SIZE - 1); + + while (size) { + u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ? + SSC_RANGE_OP_MAX_SIZE : size; + __uniphier_cache_maint_range(start, chunk_size, operation); + + start += chunk_size; + size -= chunk_size; + } + + writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ + readl(SSCOPE); /* need a read back to confirm */ +} + +void v7_outer_cache_flush_range(u32 start, u32 end) +{ + uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV); +} + +void v7_outer_cache_inval_range(u32 start, u32 end) +{ + uniphier_cache_maint_range(start, end, SSCOQM_CM_INV); +} + +void v7_outer_cache_enable(void) +{ + u32 tmp; + tmp = readl(SSCC); + tmp |= SSCC_ON; + writel(tmp, SSCC); +} +#endif + +void v7_outer_cache_disable(void) +{ + u32 tmp; + tmp = readl(SSCC); + tmp &= ~SSCC_ON; + writel(tmp, SSCC); +} + +void wakeup_secondary(void); + +void enable_caches(void) +{ + uint32_t reg; + +#ifdef CONFIG_UNIPHIER_SMP + /* + * The secondary CPU must move to DDR, + * before L2 disable. + * On SPL, the Page Table is located on the L2. + */ + wakeup_secondary(); +#endif + /* + * UniPhier SoCs must use L2 cache for init stack pointer. + * We disable L2 and L1 in this order. + * If CONFIG_SYS_DCACHE_OFF is not defined, + * caches are enabled again with a new page table. + */ + + /* L2 disable */ + v7_outer_cache_disable(); + + /* L1 disable */ + reg = get_cr(); + reg &= ~(CR_C | CR_M); + set_cr(reg); + +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} diff --git a/arch/arm/mach-uniphier/cmd_ddrphy.c b/arch/arm/mach-uniphier/cmd_ddrphy.c new file mode 100644 index 0000000..431d901 --- /dev/null +++ b/arch/arm/mach-uniphier/cmd_ddrphy.c @@ -0,0 +1,229 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +/* Select either decimal or hexadecimal */ +#if 1 +#define PRINTF_FORMAT "%2d" +#else +#define PRINTF_FORMAT "%02x" +#endif +/* field separator */ +#define FS " " + +static u32 read_bdl(struct ddrphy_datx8 __iomem *dx, int index) +{ + return (readl(&dx->bdlr[index / 5]) >> (index % 5 * 6)) & 0x3f; +} + +static void dump_loop(void (*callback)(struct ddrphy_datx8 __iomem *)) +{ + int ch, p, dx; + struct ddrphy __iomem *phy; + + for (ch = 0; ch < NR_DDRCH; ch++) { + for (p = 0; p < NR_DDRPHY_PER_CH; p++) { + phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); + + for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { + printf("CH%dP%dDX%d:", ch, p, dx); + (*callback)(&phy->dx[dx]); + printf("\n"); + } + } + } +} + +static void __wbdl_dump(struct ddrphy_datx8 __iomem *dx) +{ + int i; + + for (i = 0; i < 10; i++) + printf(FS PRINTF_FORMAT, read_bdl(dx, i)); + + printf(FS "(+" PRINTF_FORMAT ")", readl(&dx->lcdlr[1]) & 0xff); +} + +void wbdl_dump(void) +{ + printf("\n--- Write Bit Delay Line ---\n"); + printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM DQS (WDQD)\n"); + + dump_loop(&__wbdl_dump); +} + +static void __rbdl_dump(struct ddrphy_datx8 __iomem *dx) +{ + int i; + + for (i = 15; i < 24; i++) + printf(FS PRINTF_FORMAT, read_bdl(dx, i)); + + printf(FS "(+" PRINTF_FORMAT ")", (readl(&dx->lcdlr[1]) >> 8) & 0xff); +} + +void rbdl_dump(void) +{ + printf("\n--- Read Bit Delay Line ---\n"); + printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM (RDQSD)\n"); + + dump_loop(&__rbdl_dump); +} + +static void __wld_dump(struct ddrphy_datx8 __iomem *dx) +{ + int rank; + u32 lcdlr0 = readl(&dx->lcdlr[0]); + u32 gtr = readl(&dx->gtr); + + for (rank = 0; rank < 4; rank++) { + u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */ + u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */ + + printf(FS PRINTF_FORMAT "%sT", wld, + wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1"); + } +} + +void wld_dump(void) +{ + printf("\n--- Write Leveling Delay ---\n"); + printf(" Rank0 Rank1 Rank2 Rank3\n"); + + dump_loop(&__wld_dump); +} + +static void __dqsgd_dump(struct ddrphy_datx8 __iomem *dx) +{ + int rank; + u32 lcdlr2 = readl(&dx->lcdlr[2]); + u32 gtr = readl(&dx->gtr); + + for (rank = 0; rank < 4; rank++) { + u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */ + u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */ + + printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl); + } +} + +void dqsgd_dump(void) +{ + printf("\n--- DQS Gating Delay ---\n"); + printf(" Rank0 Rank1 Rank2 Rank3\n"); + + dump_loop(&__dqsgd_dump); +} + +static void __mdl_dump(struct ddrphy_datx8 __iomem *dx) +{ + int i; + u32 mdl = readl(&dx->mdlr); + for (i = 0; i < 3; i++) + printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff); +} + +void mdl_dump(void) +{ + printf("\n--- Master Delay Line ---\n"); + printf(" IPRD TPRD MDLD\n"); + + dump_loop(&__mdl_dump); +} + +#define REG_DUMP(x) \ + { u32 __iomem *p = &phy->x; printf("%3d: %-10s: %p : %08x\n", \ + p - (u32 *)phy, #x, p, readl(p)); } + +void reg_dump(void) +{ + int ch, p; + struct ddrphy __iomem *phy; + + printf("\n--- DDR PHY registers ---\n"); + + for (ch = 0; ch < NR_DDRCH; ch++) { + for (p = 0; p < NR_DDRPHY_PER_CH; p++) { + printf("== Ch%d, PHY%d ==\n", ch, p); + printf(" No: Name : Address : Data\n"); + + phy = (struct ddrphy __iomem *)DDRPHY_BASE(ch, p); + + REG_DUMP(ridr); + REG_DUMP(pir); + REG_DUMP(pgcr[0]); + REG_DUMP(pgcr[1]); + REG_DUMP(pgsr[0]); + REG_DUMP(pgsr[1]); + REG_DUMP(pllcr); + REG_DUMP(ptr[0]); + REG_DUMP(ptr[1]); + REG_DUMP(ptr[2]); + REG_DUMP(ptr[3]); + REG_DUMP(ptr[4]); + REG_DUMP(acmdlr); + REG_DUMP(acbdlr); + REG_DUMP(dxccr); + REG_DUMP(dsgcr); + REG_DUMP(dcr); + REG_DUMP(dtpr[0]); + REG_DUMP(dtpr[1]); + REG_DUMP(dtpr[2]); + REG_DUMP(mr0); + REG_DUMP(mr1); + REG_DUMP(mr2); + REG_DUMP(mr3); + REG_DUMP(dx[0].gcr); + REG_DUMP(dx[0].gtr); + REG_DUMP(dx[1].gcr); + REG_DUMP(dx[1].gtr); + } + } +} + +static int do_ddr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char *cmd = argv[1]; + + if (argc == 1) + cmd = "all"; + + if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all")) + wbdl_dump(); + + if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all")) + rbdl_dump(); + + if (!strcmp(cmd, "wld") || !strcmp(cmd, "all")) + wld_dump(); + + if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all")) + dqsgd_dump(); + + if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all")) + mdl_dump(); + + if (!strcmp(cmd, "reg") || !strcmp(cmd, "all")) + reg_dump(); + + return 0; +} + +U_BOOT_CMD( + ddr, 2, 1, do_ddr, + "UniPhier DDR PHY parameters dumper", + "- dump all of the followings\n" + "ddr wbdl - dump Write Bit Delay\n" + "ddr rbdl - dump Read Bit Delay\n" + "ddr wld - dump Write Leveling\n" + "ddr dqsgd - dump DQS Gating Delay\n" + "ddr mdl - dump Master Delay Line\n" + "ddr reg - dump registers\n" +); diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c new file mode 100644 index 0000000..3c1b325 --- /dev/null +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int mode_sel, i; + + printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; boot_device_table[i].info; i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); + + return 0; +} + +U_BOOT_CMD( + pinmon, 1, 1, do_pinmon, + "pin monitor", + "" +); diff --git a/arch/arm/mach-uniphier/cpu_info.c b/arch/arm/mach-uniphier/cpu_info.c new file mode 100644 index 0000000..86d079a --- /dev/null +++ b/arch/arm/mach-uniphier/cpu_info.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2013-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int print_cpuinfo(void) +{ + u32 revision, type, model, rev, required_model = 1, required_rev = 1; + + revision = readl(SG_REVISION); + type = (revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT; + model = (revision & SG_REVISION_MODEL_MASK) >> SG_REVISION_MODEL_SHIFT; + rev = (revision & SG_REVISION_REV_MASK) >> SG_REVISION_REV_SHIFT; + + puts("CPU: "); + + switch (type) { + case 0x25: + puts("PH1-sLD3 (MN2WS0220)"); + required_model = 2; + break; + case 0x26: + puts("PH1-LD4 (MN2WS0250)"); + required_rev = 2; + break; + case 0x28: + puts("PH1-Pro4 (MN2WS0230)"); + break; + case 0x29: + puts("PH1-sLD8 (MN2WS0270)"); + break; + default: + printf("Unknown Processor ID (0x%x)\n", revision); + return -1; + } + + if (model > 1) + printf(" model %d", model); + + printf(" (rev. %d)\n", rev); + + if (model < required_model) { + printf("Sorry, this model is not supported.\n"); + printf("Required model is %d.", required_model); + return -1; + } else if (rev < required_rev) { + printf("Sorry, this revision is not supported.\n"); + printf("Required revision is %d.", required_rev); + return -1; + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/ddrphy_training.c b/arch/arm/mach-uniphier/ddrphy_training.c new file mode 100644 index 0000000..cc8b8ad --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy_training.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) +{ + int dx; + u32 __iomem tmp, *p; + + for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { + p = &phy->dx[dx].gcr; + + tmp = readl(p); + /* Specify the rank that should be write leveled */ + tmp &= ~DXGCR_WLRKEN_MASK; + tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; + writel(tmp, p); + } + + p = &phy->dtcr; + + tmp = readl(p); + /* Specify the rank used during data bit deskew and eye centering */ + tmp &= ~DTCR_DTRANK_MASK; + tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; + /* Use Multi-Purpose Register for DQS gate training */ + tmp |= DTCR_DTMPR; + /* Specify the rank enabled for data-training */ + tmp &= ~DTCR_RNKEN_MASK; + tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; + writel(tmp, p); +} + +struct ddrphy_init_sequence { + char *description; + u32 init_flag; + u32 done_flag; + u32 err_flag; +}; + +static struct ddrphy_init_sequence init_sequence[] = { + { + "DRAM Initialization", + PIR_DRAMRST | PIR_DRAMINIT, + PGSR0_DIDONE, + PGSR0_DIERR + }, + { + "Write Leveling", + PIR_WL, + PGSR0_WLDONE, + PGSR0_WLERR + }, + { + "Read DQS Gate Training", + PIR_QSGATE, + PGSR0_QSGDONE, + PGSR0_QSGERR + }, + { + "Write Leveling Adjustment", + PIR_WLADJ, + PGSR0_WLADONE, + PGSR0_WLAERR + }, + { + "Read Bit Deskew", + PIR_RDDSKW, + PGSR0_RDDONE, + PGSR0_RDERR + }, + { + "Write Bit Deskew", + PIR_WRDSKW, + PGSR0_WDDONE, + PGSR0_WDERR + }, + { + "Read Eye Training", + PIR_RDEYE, + PGSR0_REDONE, + PGSR0_REERR + }, + { + "Write Eye Training", + PIR_WREYE, + PGSR0_WEDONE, + PGSR0_WEERR + } +}; + +int ddrphy_training(struct ddrphy __iomem *phy) +{ + int i; + u32 pgsr0; + u32 init_flag = PIR_INIT; + u32 done_flag = PGSR0_IDONE; + int timeout = 50000; /* 50 msec is long enough */ +#ifdef DISPLAY_ELAPSED_TIME + ulong start = get_timer(0); +#endif + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + init_flag |= init_sequence[i].init_flag; + done_flag |= init_sequence[i].done_flag; + } + + writel(init_flag, &phy->pir); + + do { + if (--timeout < 0) { +#ifndef CONFIG_SPL_BUILD + printf("%s: error: timeout during DDR training\n", + __func__); +#endif + return -1; + } + udelay(1); + pgsr0 = readl(&phy->pgsr[0]); + } while ((pgsr0 & done_flag) != done_flag); + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + if (pgsr0 & init_sequence[i].err_flag) { +#ifndef CONFIG_SPL_BUILD + printf("%s: error: %s failed\n", __func__, + init_sequence[i].description); +#endif + return -1; + } + } + +#ifdef DISPLAY_ELAPSED_TIME + printf("%s: info: elapsed time %ld msec\n", get_timer(start)); +#endif + + return 0; +} diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c new file mode 100644 index 0000000..4b8c938 --- /dev/null +++ b/arch/arm/mach-uniphier/dram_init.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012-2015 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S new file mode 100644 index 0000000..2638bcd --- /dev/null +++ b/arch/arm/mach-uniphier/init_page_table.S @@ -0,0 +1,26 @@ +#include +#include + +/* page table */ +#define NR_SECTIONS 4096 +#define SECTION_SHIFT 20 +#define DEVICE 0x00002002 /* Non-shareable Device */ +#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */ + +#define TEXT_SECTION ((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT)) +#define STACK_SECTION ((CONFIG_SYS_INIT_SP_ADDR) >> (SECTION_SHIFT)) + + .section ".rodata" + .align 14 +ENTRY(init_page_table) + section = 0 + .rept NR_SECTIONS + .if section == TEXT_SECTION || section == STACK_SECTION + attr = NORMAL + .else + attr = DEVICE + .endif + .word (section << SECTION_SHIFT) | attr + section = section + 1 + .endr +END(init_page_table) diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S new file mode 100644 index 0000000..c208ab6 --- /dev/null +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +ENTRY(lowlevel_init) + mov r8, lr @ persevere link reg across call + + /* + * The UniPhier Boot ROM loads SPL code to the L2 cache. + * But CPUs can only do instruction fetch now because start.S has + * cleared C and M bits. + * First we need to turn on MMU and Dcache again to get back + * data access to L2. + */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache + mcr p15, 0, r0, c1, c0, 0 + +#ifdef CONFIG_DEBUG_LL + bl setup_lowlevel_debug +#endif + + /* + * Now we are using the page table embedded in the Boot ROM. + * It is not handy since it is not a straight mapped table for sLD3. + * What we need to do next is to switch over to the page table in SPL. + */ + ldr r3, =init_page_table @ page table must be 16KB aligned + + /* Disable MMU and Dcache before switching Page Table */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache + mcr p15, 0, r0, c1, c0, 0 + + bl enable_mmu + +#ifdef CONFIG_UNIPHIER_SMP + /* + * ACTLR (Auxiliary Control Register) for Cortex-A9 + * bit[9] Parity on + * bit[8] Alloc in one way + * bit[7] EXCL (Exclusive cache bit) + * bit[6] SMP + * bit[3] Write full line of zeros mode + * bit[2] L1 Prefetch enable + * bit[1] L2 prefetch enable + * bit[0] FW (Cache and TLB maintenance broadcast) + */ + mrc p15, 0, r0, c1, c0, 1 @ ACTLR (Auxiliary Control Register) + orr r0, r0, #0x41 @ enable SMP, FW bit + mcr p15, 0, r0, c1, c0, 1 + + /* branch by CPU ID */ + mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register) + and r0, r0, #0x3 + cmp r0, #0x0 + beq primary_cpu + ldr r1, =ROM_BOOT_ROMRSV2 + mov r0, #0 + str r0, [r1] +0: wfe + ldr r0, [r1] + cmp r0, #0 + beq 0b + bx r0 @ r0: entry point of U-Boot main for the secondary CPU +primary_cpu: + ldr r1, =ROM_BOOT_ROMRSV2 + ldr r0, =_start @ entry for the secondary CPU + str r0, [r1] + ldr r0, [r1] @ make sure str is complete before sev + sev @ kick the sedoncary CPU + mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register + bfc r1, #0, #13 @ clear bit 12-0 + mov r0, #-1 + str r0, [r1, #SCU_INV_ALL] @ SCU Invalidate All Register + mov r0, #1 @ SCU enable + str r0, [r1, #SCU_CTRL] @ SCU Control Register +#endif + + bl setup_init_ram @ RAM area for temporary stack pointer + + mov lr, r8 @ restore link + mov pc, lr @ back to my caller +ENDPROC(lowlevel_init) + +ENTRY(enable_mmu) + mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register) + bic r0, r0, #0x37 + orr r0, r0, #0x20 @ disable TTBR1 + mcr p15, 0, r0, c2, c0, 2 + + orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA + mcr p15, 0, r0, c2, c0, 0 @ TTBR0 + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + + mov r0, #-1 @ manager for all domains (No permission check) + mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register) + + dsb + isb + /* + * MMU on: + * TLBs was already invalidated in "../start.S" + * So, we don't need to invalidate it here. + */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable + mcr p15, 0, r0, c1, c0, 0 + + mov pc, lr +ENDPROC(enable_mmu) + +#include + +#define BOOT_RAM_SIZE (SSC_WAY_SIZE) +#define BOOT_WAY_BITS (0x00000100) /* way 8 */ + +ENTRY(setup_init_ram) + /* + * Touch to zero for the boot way + */ +0: + /* + * set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order + */ + ldr r0, = 0x00408006 @ touch to zero with address range + ldr r1, = SSCOQM + str r0, [r1] + ldr r0, = (CONFIG_SYS_INIT_SP_ADDR - BOOT_RAM_SIZE) @ base address + ldr r1, = SSCOQAD + str r0, [r1] + ldr r0, = BOOT_RAM_SIZE + ldr r1, = SSCOQSZ + str r0, [r1] + ldr r0, = BOOT_WAY_BITS + ldr r1, = SSCOQWN + str r0, [r1] + ldr r1, = SSCOPPQSEF + ldr r0, [r1] + cmp r0, #0 @ check if the command is successfully set + bne 0b @ try again if an error occurres + + ldr r1, = SSCOLPQS +1: + ldr r0, [r1] + cmp r0, #0x4 + bne 1b @ wait until the operation is completed + str r0, [r1] @ clear the complete notification flag + + mov pc, lr +ENDPROC(setup_init_ram) diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile new file mode 100644 index 0000000..72f4663 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -0,0 +1,14 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c new file mode 100644 index 0000000..85f37f2 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +void bcu_init(void) +{ + int shift; + + writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ + + /* Specify DDR channel */ + shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c new file mode 100644 index 0000000..d359b56 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c @@ -0,0 +1 @@ +#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c new file mode 100644 index 0000000..60fc5ad --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8253c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a82dbc0, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000800, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S new file mode 100644 index 0000000..c0778a0 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S @@ -0,0 +1,29 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#define UART_CLK 36864000 +#include + +ENTRY(setup_lowlevel_debug) + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 85, 1, r0, r1 + set_pinsel 88, 1, r0, r1 + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c new file mode 100644 index 0000000..a742940 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void pin_init(void) +{ + u32 tmp; + + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ + sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ + + sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ + sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ + + sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ + sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ + + sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ + sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ +#endif + + tmp = readl(SG_IECTRL); + tmp |= 0x41; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/platdevice.c b/arch/arm/mach-uniphier/ph1-ld4/platdevice.c new file mode 100644 index 0000000..9d51299 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/platdevice.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 36864000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/ph1-ld4/pll_init.c new file mode 100644 index 0000000..b83582f --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/pll_init.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#undef DPLL_SSC_RATE_1PER + +static void dpll_init(void) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT (DPLLCTRL.bit[29:20]) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x000f0000; +#if CONFIG_DDR_FREQ == 1600 + tmp |= 0x000c0000; +#elif CONFIG_DDR_FREQ == 1333 + tmp |= 0x000d0000; +#else +# error "Unknown frequency" +#endif + +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~SC_DPLLCTRL_SSC_RATE; +#else + tmp |= SC_DPLLCTRL_SSC_RATE; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c new file mode 100644 index 0000000..837b2a8 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c @@ -0,0 +1 @@ +#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c new file mode 100644 index 0000000..4839c94 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void sbc_init(void) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); + + /* XECS1: sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + +#if !defined(CONFIG_SPL_BUILD) + /* XECS0: boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS3: peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); + writel(0x0400bc01, SBBASE1); + writel(0x0800bf01, SBBASE3); + +#if !defined(CONFIG_SPL_BUILD) + /* enable access to sub memory when boot swap is on */ + sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ +#endif + sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c new file mode 100644 index 0000000..2cc5df6 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void sg_init(void) +{ + u32 tmp; + + /* Set DDR size */ + tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); + tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE + tmp |= SG_MEMCONF_SPARSEMEM; +#endif + writel(tmp, SG_MEMCONF); + + /* Input ports must be enabled before deasserting reset of cores */ + tmp = readl(SG_IECTRL); + tmp |= 0x1; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/ph1-ld4/umc_init.c new file mode 100644 index 0000000..bbc3dcb --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-ld4/umc_init.c @@ -0,0 +1,171 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + if (freq == 1333) { + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x000FF0FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + } else if (freq == 1600) { + writel(0x36BB0F17, dramcont + UMC_CMDCTLA); + writel(0x18C6AA24, dramcont + UMC_CMDCTLB); + writel(0x5101387F, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x2F030D3F, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x43030D3F, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + } + + writel(0x00000006, dramcont + UMC_DRMMR1); + + if (freq == 1333) + writel(0x00000290, dramcont + UMC_DRMMR2); + else if (freq == 1600) + writel(0x00000298, dramcont + UMC_DRMMR2); + + writel(0x00000800, dramcont + UMC_DRMMR3); + + if (freq == 1333) { + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + } else if (freq == 1600) { + if (size == 1) + writel(0x002B0617, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x003F0617, dramcont + UMC_SPCCTLA); + + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + } + + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ + (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ + CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 +/* OK */ +#else +#error Unsupported DDR configuration. +#endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile new file mode 100644 index 0000000..e330fda --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -0,0 +1,14 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c new file mode 100644 index 0000000..c31b74b --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + { /* sentinel */ } +}; + +int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 spl_boot_device(void) +{ + int boot_mode; + + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c new file mode 100644 index 0000000..c5d1f60 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000000, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S new file mode 100644 index 0000000..a793b7c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -0,0 +1,39 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define UART_CLK 73728000 +#include + +ENTRY(setup_lowlevel_debug) + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CLK_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 127, 0, r0, r1 + set_pinsel 128, 0, r0, r1 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c new file mode 100644 index 0000000..4e3d476 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ + sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ + sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ + sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ + sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ + sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ + sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ + sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/platdevice.c b/arch/arm/mach-uniphier/ph1-pro4/platdevice.c new file mode 100644 index 0000000..31ee2a2 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/platdevice.c @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 73728000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, +}; diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c new file mode 100644 index 0000000..1db90f8 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#undef DPLL_SSC_RATE_1PER + +static void dpll_init(void) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT ( DPLLCTRL.bit[29:20] ) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~(0x000f0000); +#if CONFIG_DDR_FREQ == 1600 + tmp |= 0x000c0000; +#elif CONFIG_DDR_FREQ == 1333 + tmp |= 0x000d0000; +#else +# error "Unsupported frequency" +#endif + + /* + * Set Moduration rate + * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) + */ +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~0x00008000; +#else + tmp |= 0x00008000; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); +} + +static void stop_mpll(void) +{ + u32 tmp; + + tmp = readl(SC_MPLLOSCCTL); + + if (!(tmp & SC_MPLLOSCCTL_MPLLST)) + return; /* already stopped */ + + tmp &= ~SC_MPLLOSCCTL_MPLLEN; + writel(tmp, SC_MPLLOSCCTL); + + while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST) + ; +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + +#if defined(CONFIG_MACH_PH1_PRO4) + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; +#endif + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + stop_mpll(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 1 usec in vpll_init() so 1 usec can be saved here. + */ + udelay(499); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c new file mode 100644 index 0000000..4538d1a --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void enable_dpll_ssc(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c new file mode 100644 index 0000000..3c82a1a --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void sbc_init(void) +{ +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * + * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank + * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x3effffff: memory bank (31MB) + * 0x03f00000-0x3fffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } +#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +#if !defined(CONFIG_SPL_BUILD) + /* XECS0: boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS1: sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + + /* XECS3: peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); + + writel(0x0000bc01, SBBASE0); /* boot memory */ + writel(0x0400bc01, SBBASE1); /* sub memory */ + writel(0x0800bf01, SBBASE3); /* peripherals */ + +#if !defined(CONFIG_SPL_BUILD) + sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ +#endif + sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ + writel(0x00000001, SG_LOADPINCTRL); + +#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */ +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c new file mode 100644 index 0000000..b7c4b10 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void sg_init(void) +{ + u32 tmp; + + /* Set DDR size */ + tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); + tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE + tmp |= SG_MEMCONF_SPARSEMEM; +#endif + writel(tmp, SG_MEMCONF); + + /* Input ports must be enabled before deasserting reset of cores */ + tmp = readl(SG_IECTRL); + tmp |= 1 << 6; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c new file mode 100644 index 0000000..2d1bde6 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000001, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x07ffffff, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + + writel(0x03010100, ssif_base + UMC_HDMCHSEL); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DVCCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_HDMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_HDDRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_GIORST); + writel(0x00000001, ssif_base + UMC_HD2RST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_DVCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_VPERST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + writel(0x66bb0f17, dramcont + UMC_CMDCTLA); + writel(0x18c6aa44, dramcont + UMC_CMDCTLB); + writel(0x5101387f, dramcont + UMC_INITCTLA); + writel(0x43030d3f, dramcont + UMC_INITCTLB); + writel(0x00ff00ff, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000298, dramcont + UMC_DRMMR2); + writel(0x00000000, dramcont + UMC_DRMMR3); + writel(0x003f0617, dramcont + UMC_SPCCTLA); + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); + writel(0x04060802, dramcont + UMC_WDATACTL_D0); + writel(0x04060802, dramcont + UMC_WDATACTL_D1); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x0000000f, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x00000000, dramcont + 0x0060); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00010000, dramcont + UMC_SPCSETD); + writel(0x80000020, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000103, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_1, freq, size_ch0); + + ddrphy_prepare_training(phy0_1, 1); + ddrphy_training(phy0_1); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 0); + ddrphy_training(phy1_0); + + writel(0x00000103, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_1, freq, size_ch1); + + ddrphy_prepare_training(phy1_1, 1); + ddrphy_training(phy1_1); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ + (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ + ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ + (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) +/* OK */ +#else + #error Unsupported DDR configuration. +#endif diff --git a/arch/arm/mach-uniphier/ph1-sld8/Makefile b/arch/arm/mach-uniphier/ph1-sld8/Makefile new file mode 100644 index 0000000..72f4663 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/Makefile @@ -0,0 +1,14 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \ + pll_spectrum.o umc_init.o ddrphy_init.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c new file mode 100644 index 0000000..69b172e --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c @@ -0,0 +1 @@ +#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c new file mode 100644 index 0000000..d359b56 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c @@ -0,0 +1 @@ +#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c new file mode 100644 index 0000000..a5eafef --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, &phy->mr3); +#else + writel(0x00000800, &phy->mr3); +#endif + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S new file mode 100644 index 0000000..a413e5f --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S @@ -0,0 +1,29 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#define UART_CLK 80000000 +#include + +ENTRY(setup_lowlevel_debug) + init_debug_uart r0, r1, r2 + + /* UART Port 0 */ + set_pinsel 70, 3, r0, r1 + set_pinsel 71, 3, r0, r1 + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c new file mode 100644 index 0000000..5e80335 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ + sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ + + sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ + sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ + + sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ + sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ + + sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ + sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ +#endif + +#ifdef CONFIG_SYS_I2C_UNIPHIER + { + u32 tmp; + tmp = readl(SG_IECTRL); + tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ + writel(tmp, SG_IECTRL); + } +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 4); */ /* RXD1 -> USB2OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/ph1-sld8/platdevice.c b/arch/arm/mach-uniphier/ph1-sld8/platdevice.c new file mode 100644 index 0000000..ea0691d --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/platdevice.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#define UART_MASTER_CLK 80000000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c b/arch/arm/mach-uniphier/ph1-sld8/pll_init.c new file mode 100644 index 0000000..4b82700 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/pll_init.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static void dpll_init(void) +{ + u32 tmp; + /* + * Set DPLL SSC parameters for DPLLCTRL3 + * [23] DIVN_TEST 0x1 + * [22:16] DIVN 0x50 + * [10] FREFSEL_TEST 0x1 + * [9:8] FREFSEL 0x2 + * [4] ICPD_TEST 0x1 + * [3:0] ICPD 0xb + */ + tmp = readl(SC_DPLLCTRL3); + tmp &= ~0x00ff0717; + tmp |= 0x00d0061b; + writel(tmp, SC_DPLLCTRL3); + + /* + * Set DPLL SSC parameters for DPLLCTRL + * <-1%> <-2%> + * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) + * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x3ff07fff; +#ifdef CONFIG_DPLL_SSC_RATE_1PER + tmp |= 0x084018bf; +#else + tmp |= 0x084031a6; +#endif + writel(tmp, SC_DPLLCTRL); + + /* + * Set DPLL SSC parameters for DPLLCTRL2 + * [31:29] SSC_STEP 0 + * [27] SSC_REG_REF 1 + * [26:20] SSC_M 79 (0x4f) + * [19:0] SSC_K 964689 (0xeb851) + */ + tmp = readl(SC_DPLLCTRL2); + tmp &= ~0xefffffff; + tmp |= 0x0cfeb851; + writel(tmp, SC_DPLLCTRL2); +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); +} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c new file mode 100644 index 0000000..9b8c485 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c @@ -0,0 +1 @@ +#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c new file mode 100644 index 0000000..5efee9c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void sbc_init(void) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); + +#if !defined(CONFIG_SPL_BUILD) + /* XECS0 : dummy */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS1 : boot memory (always boot swap = on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + + /* XECS4 : sub memory */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); + + /* XECS5 : peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); /* boot memory */ + writel(0x0900bfff, SBBASE1); /* dummy */ + writel(0x0400bc01, SBBASE4); /* sub memory */ + writel(0x0800bf01, SBBASE5); /* peripherals */ + + sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ + sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ + + /* dummy read to assure write process */ + readl(SG_PINCTRL(33)); +} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c new file mode 100644 index 0000000..a808289 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c @@ -0,0 +1 @@ +#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c b/arch/arm/mach-uniphier/ph1-sld8/umc_init.c new file mode 100644 index 0000000..2fbc73a --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld8/umc_init.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ +#ifdef CONFIG_DDR_STANDARD + writel(0x55990b11, dramcont + UMC_CMDCTLA); + writel(0x16958944, dramcont + UMC_CMDCTLB); +#else + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); +#endif + + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000290, dramcont + UMC_DRMMR2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, dramcont + UMC_DRMMR3); +#else + writel(0x00000800, dramcont + UMC_DRMMR3); +#endif + + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000004f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000077, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ + (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ + CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 +/* OK */ +#else +#error Unsupported DDR configuration. +#endif diff --git a/arch/arm/mach-uniphier/print_misc_info.c b/arch/arm/mach-uniphier/print_misc_info.c new file mode 100644 index 0000000..69cfab5 --- /dev/null +++ b/arch/arm/mach-uniphier/print_misc_info.c @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2015 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +int misc_init_f(void) +{ + return check_support_card(); +} diff --git a/arch/arm/mach-uniphier/reset.c b/arch/arm/mach-uniphier/reset.c new file mode 100644 index 0000000..50d1fed --- /dev/null +++ b/arch/arm/mach-uniphier/reset.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void reset_cpu(unsigned long ignored) +{ + u32 tmp; + + writel(5, SC_IRQTIMSET); /* default value */ + + tmp = readl(SC_SLFRSTSEL); + tmp &= ~0x3; /* mask [1:0] */ + tmp |= 0x0; /* XRST reboot */ + writel(tmp, SC_SLFRSTSEL); + + tmp = readl(SC_SLFRSTCTL); + tmp |= 0x1; + writel(tmp, SC_SLFRSTCTL); +} diff --git a/arch/arm/mach-uniphier/smp.S b/arch/arm/mach-uniphier/smp.S new file mode 100644 index 0000000..25ba981 --- /dev/null +++ b/arch/arm/mach-uniphier/smp.S @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* Entry point of U-Boot main program for the secondary CPU */ +LENTRY(secondary_entry) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache disable + mcr p15, 0, r0, c1, c0, 0 + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + dsb + led_write(C,0,,) + ldr r1, =ROM_BOOT_ROMRSV2 + mov r0, #0 + str r0, [r1] +0: wfe + ldr r4, [r1] @ r4: entry point for secondary CPUs + cmp r4, #0 + beq 0b + led_write(C, P, U, 1) + bx r4 @ secondary CPUs jump to linux +ENDPROC(secondary_entry) + +ENTRY(wakeup_secondary) + ldr r1, =ROM_BOOT_ROMRSV2 +0: ldr r0, [r1] + cmp r0, #0 + bne 0b + + /* set entry address and send event to the secondary CPU */ + ldr r0, =secondary_entry + str r0, [r1] + ldr r0, [r1] @ make sure store is complete + mov r0, #0x100 +0: subs r0, r0, #1 @ I don't know the reason, but without this wait + bne 0b @ fails to wake up the secondary CPU + sev + + /* wait until the secondary CPU reach to secondary_entry */ +0: ldr r0, [r1] + cmp r0, #0 + bne 0b + bx lr +ENDPROC(wakeup_secondary) diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c new file mode 100644 index 0000000..8a4eafc --- /dev/null +++ b/arch/arm/mach-uniphier/spl.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2013-2015 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +void __weak bcu_init(void) +{ +}; +void sbc_init(void); +void sg_init(void); +void pll_init(void); +void pin_init(void); +void clkrst_init(void); +int umc_init(void); +void enable_dpll_ssc(void); + +void spl_board_init(void) +{ + bcu_init(); + + sbc_init(); + + sg_init(); + + uniphier_board_reset(); + + pll_init(); + + uniphier_board_init(); + + led_write(L, 0, , ); + + clkrst_init(); + + led_write(L, 1, , ); + + { + int res; + + res = umc_init(); + if (res < 0) { + while (1) + ; + } + } + led_write(L, 2, , ); + + enable_dpll_ssc(); + + led_write(L, 3, , ); +} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c new file mode 100644 index 0000000..443224c --- /dev/null +++ b/arch/arm/mach-uniphier/support_card.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + +#define PFC_MICRO_SUPPORT_CARD_RESET \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) +#define PFC_MICRO_SUPPORT_CARD_REVISION \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) +/* + * 0: reset deassert, 1: reset + * + * bit[0]: LAN, I2C, LED + * bit[1]: UART + */ +void support_card_reset_deassert(void) +{ + writel(0, PFC_MICRO_SUPPORT_CARD_RESET); +} + +void support_card_reset(void) +{ + writel(3, PFC_MICRO_SUPPORT_CARD_RESET); +} + +static int support_card_show_revision(void) +{ + u32 revision; + + revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); + printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + return 0; +} +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) + +#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) +#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) +#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) +#define DCC_MICRO_SUPPORT_CARD_REVISION \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) + +void support_card_reset_deassert(void) +{ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ +} + +void support_card_reset(void) +{ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ +} + +static int support_card_show_revision(void) +{ + u32 revision; + + revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); + + if (revision >= 0x67) { + printf("(DCC CPLD version 3.%d.%d)\n", + revision >> 4, revision & 0xf); + return 0; + } else { + printf("(DCC CPLD unknown version)\n"); + return -1; + } +} +#endif + +int check_support_card(void) +{ + printf("SC: Micro Support Card "); + return support_card_show_revision(); +} + +void support_card_init(void) +{ + /* + * After power on, we need to keep the LAN controller in reset state + * for a while. (200 usec) + * Fortunatelly, enough wait time is already inserted in pll_init() + * function. So we do not have to wait here. + */ + support_card_reset_deassert(); +} + +#if defined(CONFIG_SMC911X) +#include + +int board_eth_init(bd_t *bis) +{ + return smc911x_initialize(0, CONFIG_SMC911X_BASE); +} +#endif + +#if !defined(CONFIG_SYS_NO_FLASH) + +#include +#include + +struct memory_bank { + phys_addr_t base; + unsigned long size; +}; + +static int mem_is_flash(const struct memory_bank *mem) +{ + const int loop = 128; + u32 *scratch_addr; + u32 saved_value; + int ret = 1; + int i; + + /* just in case, use the tail of the memory bank */ + scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, + sizeof(u32) * loop, MAP_NOCACHE); + + for (i = 0; i < loop; i++, scratch_addr++) { + saved_value = readl(scratch_addr); + writel(~saved_value, scratch_addr); + if (readl(scratch_addr) != saved_value) { + /* We assume no memory or SRAM here. */ + writel(saved_value, scratch_addr); + ret = 0; + break; + } + } + + unmap_physmem(scratch_addr, MAP_NOCACHE); + + return ret; +} + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + /* {address, size} */ +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x02000000, 0x01f00000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x01f00000}, +}; +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x04000000, 0x02000000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x02000000}, + {0x04000000, 0x02000000}, +}; +#endif + +static const struct memory_bank +*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; + +phys_addr_t cfi_flash_bank_addr(int i) +{ + return flash_banks_list[i]->base; +} + +unsigned long cfi_flash_bank_size(int i) +{ + return flash_banks_list[i]->size; +} + +static void detect_num_flash_banks(void) +{ + const struct memory_bank *memory_bank, *end; + + cfi_flash_num_flash_banks = 0; + + if (boot_is_swapped()) { + memory_bank = memory_banks_boot_swap_on; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); + } else { + memory_bank = memory_banks_boot_swap_off; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); + } + + for (; memory_bank < end; memory_bank++) { + if (cfi_flash_num_flash_banks >= + CONFIG_SYS_MAX_FLASH_BANKS_DETECT) + break; + + if (mem_is_flash(memory_bank)) { + flash_banks_list[cfi_flash_num_flash_banks] = + memory_bank; + + debug("flash bank found: base = 0x%lx, size = 0x%lx\n", + memory_bank->base, memory_bank->size); + cfi_flash_num_flash_banks++; + } + } + + debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); +} +#else /* ONFIG_SYS_NO_FLASH */ +void detect_num_flash_banks(void) +{ +}; +#endif /* ONFIG_SYS_NO_FLASH */ + +void support_card_late_init(void) +{ + detect_num_flash_banks(); +} diff --git a/arch/arm/mach-uniphier/timer.c b/arch/arm/mach-uniphier/timer.c new file mode 100644 index 0000000..6edc084 --- /dev/null +++ b/arch/arm/mach-uniphier/timer.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */ +#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1) + +static void *get_global_timer_base(void) +{ + void *val; + + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (val) : : "memory"); + + return val + GLOBAL_TIMER_OFFSET; +} + +unsigned long timer_read_counter(void) +{ + /* + * ARM 64bit Global Timer is too much for our purpose. + * We use only lower 32 bit of the timer counter. + */ + return readl(get_global_timer_base() + GTIMER_CNT_L); +} + +int timer_init(void) +{ + /* enable timer */ + writel(PRESCALER << 8 | 1, get_global_timer_base() + GTIMER_CTRL); + + return 0; +} -- cgit v1.1