From 40f6fffee5917930597bfcc07de1cd879d4994f6 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 22 Nov 2011 15:22:39 +0100 Subject: MX: serial_mxc: cleanup removing nasty #ifdef The serial driver for iMX SOCs is continuosly changed if a new SOC or not yet used port is used. CONFIG_SYS__ defines were used only to find the base address for the selected UART. Instead of that, move the base address to the board configuration file and drop all #ifdef from driver. Signed-off-by: Stefano Babic CC: Marek Vasut CC: Wolfgang Denk CC: Fabio Estevam CC: Helmut Raiger CC: John Rigby CC: Matthias Weisser CC: Jason Liu Acked-by: Jason Liu --- arch/arm/cpu/arm1136/mx31/devices.c | 4 ---- arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +++++----- arch/arm/include/asm/arch-mx27/imx-regs.h | 8 ++++---- arch/arm/include/asm/arch-mx31/imx-regs.h | 6 ++++++ arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +++--- arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +++--- 6 files changed, 21 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c index b42dac3..2ebee2e 100644 --- a/arch/arm/cpu/arm1136/mx31/devices.c +++ b/arch/arm/cpu/arm1136/mx31/devices.c @@ -27,7 +27,6 @@ #include #include -#ifdef CONFIG_SYS_MX31_UART1 void mx31_uart1_hw_init(void) { /* setup pins for UART1 */ @@ -36,9 +35,7 @@ void mx31_uart1_hw_init(void) mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); } -#endif -#ifdef CONFIG_SYS_MX31_UART2 void mx31_uart2_hw_init(void) { /* setup pins for UART2 */ @@ -47,7 +44,6 @@ void mx31_uart2_hw_init(void) mx31_gpio_mux(MUX_RTS2__UART2_RTS_B); mx31_gpio_mux(MUX_CTS2__UART2_CTS_B); } -#endif #ifdef CONFIG_MXC_SPI /* diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index eece138..7f9449b 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -180,8 +180,8 @@ struct aips_regs { #define IMX_I2C3_BASE (0x43F84000) #define IMX_CAN1_BASE (0x43F88000) #define IMX_CAN2_BASE (0x43F8C000) -#define IMX_UART1_BASE (0x43F90000) -#define IMX_UART2_BASE (0x43F94000) +#define UART1_BASE (0x43F90000) +#define UART2_BASE (0x43F94000) #define IMX_I2C2_BASE (0x43F98000) #define IMX_OWIRE_BASE (0x43F9C000) #define IMX_CSPI1_BASE (0x43FA4000) @@ -197,15 +197,15 @@ struct aips_regs { /* SPBA */ #define IMX_SPBA_BASE (0x50000000) #define IMX_CSPI3_BASE (0x50004000) -#define IMX_UART4_BASE (0x50008000) -#define IMX_UART3_BASE (0x5000C000) +#define UART4_BASE (0x50008000) +#define UART3_BASE (0x5000C000) #define IMX_CSPI2_BASE (0x50010000) #define IMX_SSI2_BASE (0x50014000) #define IMX_ESAI_BASE (0x50018000) #define IMX_ATA_DMA_BASE (0x50020000) #define IMX_SIM1_BASE (0x50024000) #define IMX_SIM2_BASE (0x50028000) -#define IMX_UART5_BASE (0x5002C000) +#define UART5_BASE (0x5002C000) #define IMX_TSC_BASE (0x50030000) #define IMX_SSI1_BASE (0x50034000) #define IMX_FEC_BASE (0x50038000) diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index 83ab216..ced5b2a 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -224,10 +224,10 @@ struct fuse_bank0_regs { #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE) -#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE) -#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE) +#define UART1_BASE (0x0a000 + IMX_IO_BASE) +#define UART2_BASE (0x0b000 + IMX_IO_BASE) +#define UART3_BASE (0x0c000 + IMX_IO_BASE) +#define UART4_BASE (0x0d000 + IMX_IO_BASE) #define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE) #define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE) #define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE) diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 0147920..6a517dd 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -600,6 +600,12 @@ struct esdc_regs { #define WEIM_ESDCFG1 0xB800100C #define WEIM_ESDMISC 0xB8001010 +#define UART1_BASE 0x43F90000 +#define UART2_BASE 0x43F94000 +#define UART3_BASE 0x5000C000 +#define UART4_BASE 0x43FB0000 +#define UART5_BASE 0x43FB4000 + #define ESDCTL_SDE (1 << 31) #define ESDCTL_CMD_RW (0 << 28) #define ESDCTL_CMD_PRECHARGE (1 << 28) diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 25c324e..df74508 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -42,8 +42,8 @@ #define I2C_BASE_ADDR 0x43F80000 #define I2C3_BASE_ADDR 0x43F84000 #define ATA_BASE_ADDR 0x43F8C000 -#define UART1_BASE_ADDR 0x43F90000 -#define UART2_BASE_ADDR 0x43F94000 +#define UART1_BASE 0x43F90000 +#define UART2_BASE 0x43F94000 #define I2C2_BASE_ADDR 0x43F98000 #define CSPI1_BASE_ADDR 0x43FA4000 #define IOMUXC_BASE_ADDR 0x43FAC000 @@ -52,7 +52,7 @@ * SPBA */ #define SPBA_BASE_ADDR 0x50000000 -#define UART3_BASE_ADDR 0x5000C000 +#define UART3_BASE 0x5000C000 #define CSPI2_BASE_ADDR 0x50010000 #define ATA_DMA_BASE_ADDR 0x50020000 #define FEC_BASE_ADDR 0x50038000 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index d069209..0ee88d2 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -54,7 +54,7 @@ */ #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000) #define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) #define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) #define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) @@ -83,8 +83,8 @@ #define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) #define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) #define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000) +#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000) +#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000) #define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000) #define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) #define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) -- cgit v1.1