From 3fa75c875c960b0b978c63d6ae27fad8d8a0e692 Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Mon, 25 Mar 2013 07:39:33 +0000 Subject: T4/usb: move usb 2.0 utmi dual phy init code to cpu_init.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is what we have done for the UTMI PHY on P3041/P5020. Then the PHY initialization can be reused in kernel without “usb start” command. Signed-off-by: Roy Zang Signed-off-by: Andy Fleming --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 53713e3..48e6a05 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -637,6 +637,28 @@ skip_l2: } #endif +#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) + ccsr_usb_phy_t *usb_phy = + (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; + setbits_be32(&usb_phy->pllprg[1], + CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_MFI | + CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN); + setbits_be32(&usb_phy->port1.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port1.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port1.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); + setbits_be32(&usb_phy->port2.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port2.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port2.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); +#endif + #ifdef CONFIG_FMAN_ENET fman_enet_init(); #endif -- cgit v1.1