From 1aac47bd1bf8f1f4a5f12bf7c8e06a18e5b649b4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 7 Dec 2014 21:09:31 +0100 Subject: sun6i: clock_set_pll5: Calculate k and m rather then hardcoding them Our old hardcoded k and m values are based on PLL5 being configured in steps of 48 MHz, which is correct for sun6i where the DRAM PLL runs at twice the DRAM CLK, which is usually configured in 24 MHz step. But on the A23 (sun8i) the PLL5 runs at half the DRAM CLK, so we require 12 MHz steps. This commit adjusts clock_set_pll5 to automatically select the best k and m depending on the requested clk rate. Suggested-by: Siarhei Siamashka Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 193e314..ad50dd9 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -148,13 +148,18 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - const int k = 2; - const int m = 1; + const int max_n = 32; + int k = 1, m = 2; if (sigma_delta_enable) writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg); /* PLL5 rate = 24000000 * n * k / m */ + if (clk > 24000000 * k * max_n / m) { + m = 1; + if (clk > 24000000 * k * max_n / m) + k = 2; + } writel(CCM_PLL5_CTRL_EN | (sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) | CCM_PLL5_CTRL_UPD | -- cgit v1.1