From f7a01e4848a97935985f58e5cd1b133dad298323 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 8 Jun 2016 05:07:35 -0700 Subject: x86: baytrail: Configure card detect pin of the SD controller As of today, the latest version FSP (gold4) for BayTrail misses the PAD configuration of the SD controller's Card Detect signal. The default PAD value for the CD pin sets the pin to work in GPIO mode, which causes card detect status cannot be reflected by the Present State register in the SD controller (bit 16 & bit 18 are always zero). Add a configuration for this pin in the pinctrl node. Note I've checked the PAD configuration for all the pins in all the 3 controllers (eMMC/SDIO/SD). Only this SDMMC3_CD_B pin does not get initialized to correct mode by FSP. With fsp,emmc-boot-mode set to 2 (eMMC 4.1), eMMC pins are initialized to func 1, but if we set fsp,emmc-boot-mode to 1 (auto), those pins are initialized to func 3 which is correct according to datasheet. Signed-off-by: Bin Meng Reviewed-by: Stefan Roese Reviewed-by: Simon Glass --- arch/x86/dts/bayleybay.dts | 15 +++++++++++++++ arch/x86/dts/conga-qeval20-qa3-e3845.dts | 15 +++++++++++++++ arch/x86/dts/minnowmax.dts | 15 +++++++++++++++ 3 files changed, 45 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts index 1c2f671..c8907ce 100644 --- a/arch/x86/dts/bayleybay.dts +++ b/arch/x86/dts/bayleybay.dts @@ -68,6 +68,21 @@ pch_pinctrl { compatible = "intel,x86-pinctrl"; reg = <0 0>; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; }; pci { diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts index 1e14c8b..fba089d 100644 --- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts +++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts @@ -31,6 +31,21 @@ pch_pinctrl { compatible = "intel,x86-pinctrl"; reg = <0 0>; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; }; chosen { diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index ba96e36..1a8a8cc 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -73,6 +73,21 @@ output-value = <1>; direction = ; }; + + /* + * As of today, the latest version FSP (gold4) for BayTrail + * misses the PAD configuration of the SD controller's Card + * Detect signal. The default PAD value for the CD pin sets + * the pin to work in GPIO mode, which causes card detect + * status cannot be reflected by the Present State register + * in the SD controller (bit 16 & bit 18 are always zero). + * + * Configure this pin to function 1 (SD controller). + */ + sdmmc3_cd@0 { + pad-offset = <0x3a0>; + mode-func = <1>; + }; }; chosen { -- cgit v1.1