From d928664f4101e24128c879956d1aa7c76509ea6a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 15 Jan 2015 17:13:24 +0900 Subject: powerpc: 74xx_7xx: remove 74xx_7xx cpu support All the 74xx_7xx boards are still non-generic boards: P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2 Acked-by: Marek Vasut Acked-by: Stefan Roese Acked-by: York Sun Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk Cc: Nye Liu Cc: Roy Zang --- arch/powerpc/cpu/74xx_7xx/Kconfig | 32 -- arch/powerpc/cpu/74xx_7xx/Makefile | 13 - arch/powerpc/cpu/74xx_7xx/cache.S | 404 ---------------- arch/powerpc/cpu/74xx_7xx/config.mk | 8 - arch/powerpc/cpu/74xx_7xx/cpu.c | 300 ------------ arch/powerpc/cpu/74xx_7xx/cpu_init.c | 47 -- arch/powerpc/cpu/74xx_7xx/interrupts.c | 88 ---- arch/powerpc/cpu/74xx_7xx/io.S | 112 ----- arch/powerpc/cpu/74xx_7xx/kgdb.S | 61 --- arch/powerpc/cpu/74xx_7xx/speed.c | 165 ------- arch/powerpc/cpu/74xx_7xx/start.S | 829 --------------------------------- arch/powerpc/cpu/74xx_7xx/traps.c | 218 --------- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 78 ---- 13 files changed, 2355 deletions(-) delete mode 100644 arch/powerpc/cpu/74xx_7xx/Kconfig delete mode 100644 arch/powerpc/cpu/74xx_7xx/Makefile delete mode 100644 arch/powerpc/cpu/74xx_7xx/cache.S delete mode 100644 arch/powerpc/cpu/74xx_7xx/config.mk delete mode 100644 arch/powerpc/cpu/74xx_7xx/cpu.c delete mode 100644 arch/powerpc/cpu/74xx_7xx/cpu_init.c delete mode 100644 arch/powerpc/cpu/74xx_7xx/interrupts.c delete mode 100644 arch/powerpc/cpu/74xx_7xx/io.S delete mode 100644 arch/powerpc/cpu/74xx_7xx/kgdb.S delete mode 100644 arch/powerpc/cpu/74xx_7xx/speed.c delete mode 100644 arch/powerpc/cpu/74xx_7xx/start.S delete mode 100644 arch/powerpc/cpu/74xx_7xx/traps.c delete mode 100644 arch/powerpc/cpu/74xx_7xx/u-boot.lds (limited to 'arch/powerpc/cpu') diff --git a/arch/powerpc/cpu/74xx_7xx/Kconfig b/arch/powerpc/cpu/74xx_7xx/Kconfig deleted file mode 100644 index b2f1a59..0000000 --- a/arch/powerpc/cpu/74xx_7xx/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -menu "74xx_7xx CPU" - depends on 74xx_7xx - -config SYS_CPU - default "74xx_7xx" - -choice - prompt "Target select" - -config TARGET_P3G4 - bool "Support P3G4" - -config TARGET_ZUMA - bool "Support ZUMA" - -config TARGET_PPMC7XX - bool "Support ppmc7xx" - -config TARGET_ELPPC - bool "Support ELPPC" - -config TARGET_MPC7448HPC2 - bool "Support mpc7448hpc2" - -endchoice - -source "board/eltec/elppc/Kconfig" -source "board/evb64260/Kconfig" -source "board/freescale/mpc7448hpc2/Kconfig" -source "board/ppmc7xx/Kconfig" - -endmenu diff --git a/arch/powerpc/cpu/74xx_7xx/Makefile b/arch/powerpc/cpu/74xx_7xx/Makefile deleted file mode 100644 index f31fe75..0000000 --- a/arch/powerpc/cpu/74xx_7xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2001 -# Josh Huber , Mission Critical Linux, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -extra-y = start.o -obj-y = cache.o kgdb.o io.o -obj-y += traps.o cpu.o cpu_init.o speed.o interrupts.o diff --git a/arch/powerpc/cpu/74xx_7xx/cache.S b/arch/powerpc/cpu/74xx_7xx/cache.S deleted file mode 100644 index 66c7298..0000000 --- a/arch/powerpc/cpu/74xx_7xx/cache.S +++ /dev/null @@ -1,404 +0,0 @@ -#include -#include <74xx_7xx.h> -#include - -#include -#include - -#include -#include - -#ifndef CACHE_LINE_SIZE -# define CACHE_LINE_SIZE L1_CACHE_BYTES -#endif - -#if CACHE_LINE_SIZE == 128 -#define LG_CACHE_LINE_SIZE 7 -#elif CACHE_LINE_SIZE == 32 -#define LG_CACHE_LINE_SIZE 5 -#elif CACHE_LINE_SIZE == 16 -#define LG_CACHE_LINE_SIZE 4 -#elif CACHE_LINE_SIZE == 8 -#define LG_CACHE_LINE_SIZE 3 -#else -# error "Invalid cache line size!" -#endif - -/* - * Invalidate L1 instruction cache. - */ -_GLOBAL(invalidate_l1_instruction_cache) - mfspr r3,PVR - rlwinm r3,r3,16,16,31 - cmpi 0,r3,1 - beqlr /* for 601, do nothing */ - /* 603/604 processor - use invalidate-all bit in HID0 */ - mfspr r3,HID0 - ori r3,r3,HID0_ICFI - mtspr HID0,r3 - isync - blr - -/* - * Invalidate L1 data cache. - */ -_GLOBAL(invalidate_l1_data_cache) - mfspr r3,HID0 - ori r3,r3,HID0_DCFI - mtspr HID0,r3 - isync - blr - -/* - * Flush data cache. - */ -_GLOBAL(flush_dcache) - lis r3,0 - lis r5,CACHE_LINE_SIZE -flush: - cmp 0,1,r3,r5 - bge done - lwz r5,0(r3) - lis r5,CACHE_LINE_SIZE - addi r3,r3,0x4 - b flush -done: - blr -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * This is a no-op on the 601. - * - * flush_icache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(flush_icache_range) - mfspr r5,PVR - rlwinm r5,r5,16,16,31 - cmpi 0,r5,1 - beqlr /* for 601, do nothing */ - li r5,CACHE_LINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,LG_CACHE_LINE_SIZE - beqlr - mtctr r4 - mr r6,r3 -1: dcbst 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync /* wait for dcbst's to get to ram */ - mtctr r4 -2: icbi 0,r6 - addi r6,r6,CACHE_LINE_SIZE - bdnz 2b - sync /* additional sync needed on g4 */ - isync - blr -/* - * Write any modified data cache blocks out to memory. - * Does not invalidate the corresponding cache lines (especially for - * any corresponding instruction cache). - * - * clean_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(clean_dcache_range) - li r5,CACHE_LINE_SIZE-1 - andc r3,r3,r5 /* align r3 down to cache line */ - subf r4,r3,r4 /* r4 = offset of stop from start of cache line */ - add r4,r4,r5 /* r4 += cache_line_size-1 */ - srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */ - beqlr /* if r4 == 0 return */ - mtctr r4 /* ctr = r4 */ - - sync -1: dcbst 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync /* wait for dcbst's to get to ram */ - blr - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(flush_dcache_range) - li r5,CACHE_LINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,LG_CACHE_LINE_SIZE - beqlr - mtctr r4 - - sync -1: dcbf 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync /* wait for dcbf's to get to ram */ - blr - -/* - * Like above, but invalidate the D-cache. This is used by the 8xx - * to invalidate the cache so the PPC core doesn't get stale data - * from the CPM (no cache snooping here :-). - * - * invalidate_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(invalidate_dcache_range) - li r5,CACHE_LINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,LG_CACHE_LINE_SIZE - beqlr - mtctr r4 - - sync -1: dcbi 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync /* wait for dcbi's to get to ram */ - blr - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * This is a no-op on the 601 which has a unified cache. - * - * void __flush_page_to_ram(void *page) - */ -_GLOBAL(__flush_page_to_ram) - mfspr r5,PVR - rlwinm r5,r5,16,16,31 - cmpi 0,r5,1 - beqlr /* for 601, do nothing */ - rlwinm r3,r3,0,0,19 /* Get page base address */ - li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */ - mtctr r4 - mr r6,r3 -0: dcbst 0,r3 /* Write line to ram */ - addi r3,r3,CACHE_LINE_SIZE - bdnz 0b - sync - mtctr r4 -1: icbi 0,r6 - addi r6,r6,CACHE_LINE_SIZE - bdnz 1b - sync - isync - blr - -/* - * Flush a particular page from the instruction cache. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * This is a no-op on the 601 which has a unified cache. - * - * void __flush_icache_page(void *page) - */ -_GLOBAL(__flush_icache_page) - mfspr r5,PVR - rlwinm r5,r5,16,16,31 - cmpi 0,r5,1 - beqlr /* for 601, do nothing */ - li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */ - mtctr r4 -1: icbi 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync - isync - blr - -/* - * Clear a page using the dcbz instruction, which doesn't cause any - * memory traffic (except to write out any cache lines which get - * displaced). This only works on cacheable memory. - */ -_GLOBAL(clear_page) - li r0,4096/CACHE_LINE_SIZE - mtctr r0 -1: dcbz 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - blr - -/* - * Enable L1 Instruction cache - */ -_GLOBAL(icache_enable) - mfspr r3, HID0 - li r5, HID0_ICFI|HID0_ILOCK - andc r3, r3, r5 - ori r3, r3, HID0_ICE - ori r5, r3, HID0_ICFI - mtspr HID0, r5 - mtspr HID0, r3 - isync - blr - -/* - * Disable L1 Instruction cache - */ -_GLOBAL(icache_disable) - mflr r4 - bl invalidate_l1_instruction_cache /* uses r3 */ - sync - mtlr r4 - mfspr r3, HID0 - li r5, 0 - ori r5, r5, HID0_ICE - andc r3, r3, r5 - mtspr HID0, r3 - isync - blr - -/* - * Is instruction cache enabled? - */ -_GLOBAL(icache_status) - mfspr r3, HID0 - andi. r3, r3, HID0_ICE - blr - - -_GLOBAL(l1dcache_enable) - mfspr r3, HID0 - li r5, HID0_DCFI|HID0_DLOCK - andc r3, r3, r5 - mtspr HID0, r3 /* no invalidate, unlock */ - ori r3, r3, HID0_DCE - ori r5, r3, HID0_DCFI - mtspr HID0, r5 /* enable + invalidate */ - mtspr HID0, r3 /* enable */ - sync - blr - -/* - * Enable data cache(s) - L1 and optionally L2 - * Calls l2cache_enable. LR saved in r5 - */ -_GLOBAL(dcache_enable) - mfspr r3, HID0 - li r5, HID0_DCFI|HID0_DLOCK - andc r3, r3, r5 - mtspr HID0, r3 /* no invalidate, unlock */ - ori r3, r3, HID0_DCE - ori r5, r3, HID0_DCFI - mtspr HID0, r5 /* enable + invalidate */ - mtspr HID0, r3 /* enable */ - sync -#ifdef CONFIG_SYS_L2 - mflr r5 - bl l2cache_enable /* uses r3 and r4 */ - sync - mtlr r5 -#endif - blr - - -/* - * Disable data cache(s) - L1 and optionally L2 - * Calls flush_dcache and l2cache_disable_no_flush. - * LR saved in r4 - */ -_GLOBAL(dcache_disable) - mflr r4 /* save link register */ - bl flush_dcache /* uses r3 and r5 */ - sync - mfspr r3, HID0 - li r5, HID0_DCFI|HID0_DLOCK - andc r3, r3, r5 - mtspr HID0, r3 /* no invalidate, unlock */ - li r5, HID0_DCE|HID0_DCFI - andc r3, r3, r5 /* no enable, no invalidate */ - mtspr HID0, r3 - sync -#ifdef CONFIG_SYS_L2 - bl l2cache_disable_no_flush /* uses r3 */ -#endif - mtlr r4 /* restore link register */ - blr - -/* - * Is data cache enabled? - */ -_GLOBAL(dcache_status) - mfspr r3, HID0 - andi. r3, r3, HID0_DCE - blr - -/* - * Invalidate L2 cache using L2I and polling L2IP or L2I - */ -_GLOBAL(l2cache_invalidate) - sync - mfspr r3, l2cr - oris r3, r3, L2CR_L2I@h - sync - mtspr l2cr, r3 - sync - mfspr r3, PVR - sync - rlwinm r3, r3, 16,16,31 - cmpli 0,r3,0x8000 /* 7451, 7441 */ - beq 0,inv_7450 - cmpli 0,r3,0x8001 /* 7455, 7445 */ - beq 0,inv_7450 - cmpli 0,r3,0x8002 /* 7457, 7447 */ - beq 0,inv_7450 - cmpli 0,r3,0x8003 /* 7447A */ - beq 0,inv_7450 - cmpli 0,r3,0x8004 /* 7448 */ - beq 0,inv_7450 -invl2: - mfspr r3, l2cr - andi. r3, r3, L2CR_L2IP - bne invl2 - /* turn off the global invalidate bit */ - mfspr r3, l2cr - rlwinm r3, r3, 0, 11, 9 - sync - mtspr l2cr, r3 - sync - blr -inv_7450: - mfspr r3, l2cr - andis. r3, r3, L2CR_L2I@h - bne inv_7450 - blr - -/* - * Enable L2 cache - * Calls l2cache_invalidate. LR is saved in r4 - */ -_GLOBAL(l2cache_enable) - mflr r4 /* save link register */ - bl l2cache_invalidate /* uses r3 */ - sync - lis r3, L2_ENABLE@h - ori r3, r3, L2_ENABLE@l - mtspr l2cr, r3 - isync - mtlr r4 /* restore link register */ - blr - -/* - * Disable L2 cache - * Calls flush_dcache. LR is saved in r4 - */ -_GLOBAL(l2cache_disable) - mflr r4 /* save link register */ - bl flush_dcache /* uses r3 and r5 */ - sync - mtlr r4 /* restore link register */ -l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */ - lis r3, L2_INIT@h - ori r3, r3, L2_INIT@l - mtspr l2cr, r3 - isync - blr diff --git a/arch/powerpc/cpu/74xx_7xx/config.mk b/arch/powerpc/cpu/74xx_7xx/config.mk deleted file mode 100644 index 4cd1a26..0000000 --- a/arch/powerpc/cpu/74xx_7xx/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001 -# Josh Huber , Mission Critical Linux, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mstring diff --git a/arch/powerpc/cpu/74xx_7xx/cpu.c b/arch/powerpc/cpu/74xx_7xx/cpu.c deleted file mode 100644 index 6cd54bf..0000000 --- a/arch/powerpc/cpu/74xx_7xx/cpu.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * cpu.c - * - * CPU specific code - * - * written or collected and sometimes rewritten by - * Magnus Damm - * - * minor modifications by - * Wolfgang Denk - * - * more modifications by - * Josh Huber - * added support for the 74xx series of cpus - * added support for the 7xx series of cpus - * made the code a little less hard-coded, and more auto-detectish - */ - -#include -#include -#include <74xx_7xx.h> -#include - -#if defined(CONFIG_OF_LIBFDT) -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -cpu_t -get_cpu_type(void) -{ - uint pvr = get_pvr(); - cpu_t type; - - type = CPU_UNKNOWN; - - switch (PVR_VER(pvr)) { - case 0x000c: - type = CPU_7400; - break; - case 0x0008: - type = CPU_750; - - if (((pvr >> 8) & 0xff) == 0x01) { - type = CPU_750CX; /* old CX (80100 and 8010x?)*/ - } else if (((pvr >> 8) & 0xff) == 0x22) { - type = CPU_750CX; /* CX (82201,82202) and CXe (82214) */ - } else if (((pvr >> 8) & 0xff) == 0x33) { - type = CPU_750CX; /* CXe (83311) */ - } else if (((pvr >> 12) & 0xF) == 0x3) { - type = CPU_755; - } - break; - - case 0x7000: - type = CPU_750FX; - break; - - case 0x7002: - type = CPU_750GX; - break; - - case 0x800C: - type = CPU_7410; - break; - - case 0x8000: - type = CPU_7450; - break; - - case 0x8001: - type = CPU_7455; - break; - - case 0x8002: - type = CPU_7457; - break; - - case 0x8003: - type = CPU_7447A; - break; - - case 0x8004: - type = CPU_7448; - break; - - default: - break; - } - - return type; -} - -/* ------------------------------------------------------------------------- */ - -#if !defined(CONFIG_BAB7xx) -int checkcpu (void) -{ - uint type = get_cpu_type(); - uint pvr = get_pvr(); - ulong clock = gd->cpu_clk; - char buf[32]; - char *str; - - puts ("CPU: "); - - switch (type) { - case CPU_750CX: - printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"", - (pvr>>8) & 0xf, - pvr & 0xf); - goto PR_CLK; - - case CPU_750: - str = "750"; - break; - - case CPU_750FX: - str = "750FX"; - break; - - case CPU_750GX: - str = "750GX"; - break; - - case CPU_755: - str = "755"; - break; - - case CPU_7400: - str = "MPC7400"; - break; - - case CPU_7410: - str = "MPC7410"; - break; - - case CPU_7447A: - str = "MPC7447A"; - break; - - case CPU_7448: - str = "MPC7448"; - break; - - case CPU_7450: - str = "MPC7450"; - break; - - case CPU_7455: - str = "MPC7455"; - break; - - case CPU_7457: - str = "MPC7457"; - break; - - default: - printf("Unknown CPU -- PVR: 0x%08x\n", pvr); - return -1; - } - - printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF); -PR_CLK: - printf (" @ %s MHz\n", strmhz(buf, clock)); - - return (0); -} -#endif -/* these two functions are unimplemented currently [josh] */ - -/* -------------------------------------------------------------------- */ -/* L1 i-cache */ - -int -checkicache(void) -{ - return 0; /* XXX */ -} - -/* -------------------------------------------------------------------- */ -/* L1 d-cache */ - -int -checkdcache(void) -{ - return 0; /* XXX */ -} - -/* -------------------------------------------------------------------- */ - -static inline void -soft_restart(unsigned long addr) -{ - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - - __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr)); - __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4"); - __asm__ __volatile__ ("mtspr 27, 4"); - __asm__ __volatile__ ("rfi"); - - while(1); /* not reached */ -} - - -#if !defined(CONFIG_BAB7xx) && \ - !defined(CONFIG_ELPPC) && \ - !defined(CONFIG_PPMC7XX) -/* no generic way to do board reset. simply call soft_reset. */ -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr; - /* flush and disable I/D cache */ - __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); - __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); - __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4"); - __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 4"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 5"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - -#ifdef CONFIG_SYS_RESET_ADDRESS - addr = CONFIG_SYS_RESET_ADDRESS; -#else - /* - * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, - * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid - * address. Better pick an address known to be invalid on your - * system and assign it to CONFIG_SYS_RESET_ADDRESS. - */ - addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong); -#endif - soft_restart(addr); - - /* not reached */ - while(1) - ; - - return 1; -} -#endif - -/* ------------------------------------------------------------------------- */ - -/* - * For the 7400 the TB clock runs at 1/4 the cpu bus speed. - */ -#ifndef CONFIG_SYS_BUS_CLK -#define CONFIG_SYS_BUS_CLK gd->bus_clk -#endif - -unsigned long get_tbclk(void) -{ - return CONFIG_SYS_BUS_CLK / 4; -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_WATCHDOG) -#if !defined(CONFIG_BAB7xx) -void -watchdog_reset(void) -{ - -} -#endif /* !CONFIG_BAB7xx */ -#endif /* CONFIG_WATCHDOG */ - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_OF_LIBFDT -void ft_cpu_setup(void *blob, bd_t *bd) -{ - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", bd->bi_busfreq / 4, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); - - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); - - fdt_fixup_ethernet(blob); -} -#endif -/* ------------------------------------------------------------------------- */ diff --git a/arch/powerpc/cpu/74xx_7xx/cpu_init.c b/arch/powerpc/cpu/74xx_7xx/cpu_init.c deleted file mode 100644 index a6a8788..0000000 --- a/arch/powerpc/cpu/74xx_7xx/cpu_init.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * cpu_init.c - low level cpu init - * - * there's really nothing going on here yet. future work area? - */ - -#include -#include <74xx_7xx.h> - -/* - * Breath some life into the CPU... - * - * there's basically nothing to do here since the memory controller - * isn't on the CPU in this case. - */ -void -cpu_init_f (void) -{ - switch (get_cpu_type()) { - case CPU_7450: - case CPU_7455: - case CPU_7457: - case CPU_7447A: - case CPU_7448: - /* enable the timebase bit in HID0 */ - set_hid0(get_hid0() | 0x4000000); - break; - default: - /* do nothing */ - break; - } -} - -/* - * initialize higher level parts of CPU like timers - */ -int cpu_init_r (void) -{ - return (0); -} diff --git a/arch/powerpc/cpu/74xx_7xx/interrupts.c b/arch/powerpc/cpu/74xx_7xx/interrupts.c deleted file mode 100644 index a906243..0000000 --- a/arch/powerpc/cpu/74xx_7xx/interrupts.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * interrupts.c - just enough support for the decrementer/timer - */ - -#include -#include -#include -#include -#include -#include - -int interrupt_init_cpu (unsigned *decrementer_count) -{ - debug("interrupt_init: GT main cause reg: %08x:%08x\n", - GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER), - GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER)); - debug("interrupt_init: ethernet cause regs: %08x %08x %08x\n", - GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER), - GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER), - GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER)); - debug("interrupt_init: ethernet mask regs: %08x %08x %08x\n", - GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER), - GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER), - GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER)); - debug("interrupt_init: setting decrementer_count\n"); - - *decrementer_count = get_tbclk() / CONFIG_SYS_HZ; - - return (0); -} - -/****************************************************************************/ - -/* - * Handle external interrupts - */ -void -external_interrupt(struct pt_regs *regs) -{ - puts("external_interrupt (oops!)\n"); -} - -volatile ulong timestamp = 0; - -/* - * timer_interrupt - gets called when the decrementer overflows, - * with interrupts disabled. - * Trivial implementation - no need to be really accurate. - */ -void -timer_interrupt_cpu (struct pt_regs *regs) -{ - /* nothing to do here */ - return; -} - -/****************************************************************************/ - -/* - * Install and free a interrupt handler. - */ - -void -irq_install_handler(int vec, interrupt_handler_t *handler, void *arg) -{ - -} - -void -irq_free_handler(int vec) -{ - -} - -/****************************************************************************/ - -void -do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[]) -{ - puts("IRQ related functions are unimplemented currently.\n"); -} diff --git a/arch/powerpc/cpu/74xx_7xx/io.S b/arch/powerpc/cpu/74xx_7xx/io.S deleted file mode 100644 index 3b4b08a..0000000 --- a/arch/powerpc/cpu/74xx_7xx/io.S +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek - * Copyright (C) 1999 Magnus Damm - * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH - * Andreas Heppel - * Copyright (C) 2002 Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -/* ------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16 */ -/* Description: Input 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in16 -in16: - lhz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16r */ -/* Description: Input 16 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in16r -in16r: - lhbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0(3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32r */ -/* Description: Input 32 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in32r -in32r: - lwbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16 */ -/* Description: Output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16 -out16: - sth r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16r */ -/* Description: Byte reverse and output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16r -out16r: - sthbrx r4,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32r */ -/* Description: Byte reverse and output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32r -out32r: - stwbrx r4,0,r3 - sync - blr diff --git a/arch/powerpc/cpu/74xx_7xx/kgdb.S b/arch/powerpc/cpu/74xx_7xx/kgdb.S deleted file mode 100644 index 42b3a76..0000000 --- a/arch/powerpc/cpu/74xx_7xx/kgdb.S +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (C) 2000 Murray Jensen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include <74xx_7xx.h> -#include - -#include -#include - -#include -#include - -#if defined(CONFIG_CMD_KGDB) - - /* - * cache flushing routines for kgdb - */ - - .globl kgdb_flush_cache_all -kgdb_flush_cache_all: - lis r3,0 - addis r4,r0,0x0040 -kgdb_flush_loop: - lwz r5,0(r3) - addi r3,r3,CONFIG_SYS_CACHELINE_SIZE - cmp 0,0,r3,r4 - bne kgdb_flush_loop - SYNC - mfspr r3,1008 - ori r3,r3,0x8800 - mtspr 1008,r3 - sync - blr - - .globl kgdb_flush_cache_range -kgdb_flush_cache_range: - li r5,CONFIG_SYS_CACHELINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT - beqlr - mtctr r4 - mr r6,r3 -1: dcbst 0,r3 - addi r3,r3,CONFIG_SYS_CACHELINE_SIZE - bdnz 1b - sync /* wait for dcbst's to get to ram */ - mtctr r4 -2: icbi 0,r6 - addi r6,r6,CONFIG_SYS_CACHELINE_SIZE - bdnz 2b - SYNC - blr - -#endif diff --git a/arch/powerpc/cpu/74xx_7xx/speed.c b/arch/powerpc/cpu/74xx_7xx/speed.c deleted file mode 100644 index 5ffa41c..0000000 --- a/arch/powerpc/cpu/74xx_7xx/speed.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include <74xx_7xx.h> -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern unsigned long get_board_bus_clk (void); - -static const int hid1_multipliers_x_10[] = { - 25, /* 0000 - 2.5x */ - 75, /* 0001 - 7.5x */ - 70, /* 0010 - 7x */ - 10, /* 0011 - bypass */ - 20, /* 0100 - 2x */ - 65, /* 0101 - 6.5x */ - 100, /* 0110 - 10x */ - 45, /* 0111 - 4.5x */ - 30, /* 1000 - 3x */ - 55, /* 1001 - 5.5x */ - 40, /* 1010 - 4x */ - 50, /* 1011 - 5x */ - 80, /* 1100 - 8x */ - 60, /* 1101 - 6x */ - 35, /* 1110 - 3.5x */ - 0 /* 1111 - off */ -}; - -/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */ -static const int hid1_74xx_multipliers_x_10[] = { - 115, /* 00000 - 11.5x */ - 170, /* 00001 - 17x */ - 75, /* 00010 - 7.5x */ - 150, /* 00011 - 15x */ - 70, /* 00100 - 7x */ - 180, /* 00101 - 18x */ - 10, /* 00110 - bypass */ - 200, /* 00111 - 20x */ - 20, /* 01000 - 2x */ - 210, /* 01001 - 21x */ - 65, /* 01010 - 6.5x */ - 130, /* 01011 - 13x */ - 85, /* 01100 - 8.5x */ - 240, /* 01101 - 24x */ - 95, /* 01110 - 9.5x */ - 90, /* 01111 - 9x */ - 30, /* 10000 - 3x */ - 105, /* 10001 - 10.5x */ - 55, /* 10010 - 5.5x */ - 110, /* 10011 - 11x */ - 40, /* 10100 - 4x */ - 100, /* 10101 - 10x */ - 50, /* 10110 - 5x */ - 120, /* 10111 - 12x */ - 80, /* 11000 - 8x */ - 140, /* 11001 - 14x */ - 60, /* 11010 - 6x */ - 160, /* 11011 - 16x */ - 135, /* 11100 - 13.5x */ - 280, /* 11101 - 28x */ - 0, /* 11110 - off */ - 125 /* 11111 - 12.5x */ -}; - -static const int hid1_fx_multipliers_x_10[] = { - 00, /* 0000 - off */ - 00, /* 0001 - off */ - 10, /* 0010 - bypass */ - 10, /* 0011 - bypass */ - 20, /* 0100 - 2x */ - 25, /* 0101 - 2.5x */ - 30, /* 0110 - 3x */ - 35, /* 0111 - 3.5x */ - 40, /* 1000 - 4x */ - 45, /* 1001 - 4.5x */ - 50, /* 1010 - 5x */ - 55, /* 1011 - 5.5x */ - 60, /* 1100 - 6x */ - 65, /* 1101 - 6.5x */ - 70, /* 1110 - 7x */ - 75, /* 1111 - 7.5 */ - 80, /* 10000 - 8x */ - 85, /* 10001 - 8.5x */ - 90, /* 10010 - 9x */ - 95, /* 10011 - 9.5x */ - 100, /* 10100 - 10x */ - 110, /* 10101 - 11x */ - 120, /* 10110 - 12x */ -}; - - -/* ------------------------------------------------------------------------- */ - -/* - * Measure CPU clock speed (core clock GCLK1, GCLK2) - * - * (Approx. GCLK frequency in Hz) - */ - -int get_clocks (void) -{ - ulong clock = 0; - -#ifdef CONFIG_SYS_BUS_CLK - gd->bus_clk = CONFIG_SYS_BUS_CLK; /* bus clock is a fixed frequency */ -#else - gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */ -#endif - - /* calculate the clock frequency based upon the CPU type */ - switch (get_cpu_type()) { - case CPU_7447A: - case CPU_7448: - case CPU_7455: - case CPU_7457: - /* - * Make sure division is done before multiplication to prevent 32-bit - * arithmetic overflows which will cause a negative number - */ - clock = (gd->bus_clk / 10) * - hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F]; - break; - - case CPU_750GX: - case CPU_750FX: - clock = (gd->bus_clk / 10) * - hid1_fx_multipliers_x_10[get_hid1 () >> 27]; - break; - - case CPU_7450: - case CPU_740: - case CPU_740P: - case CPU_745: - case CPU_750CX: - case CPU_750: - case CPU_750P: - case CPU_755: - case CPU_7400: - case CPU_7410: - /* - * Make sure division is done before multiplication to prevent 32-bit - * arithmetic overflows which will cause a negative number - */ - clock = (gd->bus_clk / 10) * - hid1_multipliers_x_10[get_hid1 () >> 28]; - break; - - case CPU_UNKNOWN: - printf ("get_gclk_freq(): unknown CPU type\n"); - clock = 0; - return (1); - } - - gd->cpu_clk = clock; - - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S deleted file mode 100644 index 8393781..0000000 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ /dev/null @@ -1,829 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek - * Copyright (C) 1999 Magnus Damm - * Copyright (C) 2000,2001,2002 Wolfgang Denk - * Copyright (C) 2001 Josh Huber - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* U-Boot - Startup Code for PowerPC based Embedded Boards - * - * - * The processor starts at 0xfff00100 and the code is executed - * from flash. The code is organized to be at an other address - * in memory, but as long we don't jump around before relocating. - * board_init lies at a quite high address and when the cpu has - * jumped there, everything is ok. - */ -#include -#include -#include <74xx_7xx.h> -#include - -#include -#include - -#include -#include -#include - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -/* Machine Check and Recoverable Interr. */ -#define MSR_KERNEL ( MSR_ME | MSR_RI ) - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * r3 - 1st arg to board_init(): IMMP pointer - * r4 - 2nd arg to board_init(): boot flag - */ - .text - .long 0x27051956 /* U-Boot Magic Number */ - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - - . = EXC_OFF_SYS_RESET - .globl _start -_start: - b boot_cold - - /* the boot code is located below the exception table */ - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. "Never" generated on the 860. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. "Never" generated on the 860. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - /* No FPU on MPC8xx. This exception is not supposed to happen. - */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - /* - * On the MPC8xx, this is a software emulation interrupt. It - * occurs for all unimplemented and illegal instructions. - */ - STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException) - - STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) - STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) - STD_EXCEPTION(0x1400, DataTLBError, UnknownException) - - STD_EXCEPTION(0x1500, Reserved5, UnknownException) - STD_EXCEPTION(0x1600, Reserved6, UnknownException) - STD_EXCEPTION(0x1700, Reserved7, UnknownException) - STD_EXCEPTION(0x1800, Reserved8, UnknownException) - STD_EXCEPTION(0x1900, Reserved9, UnknownException) - STD_EXCEPTION(0x1a00, ReservedA, UnknownException) - STD_EXCEPTION(0x1b00, ReservedB, UnknownException) - - STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) - STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) - STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) - STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x2000 - -boot_cold: - /* disable everything */ - li r0, 0 - mtspr HID0, r0 - sync - mtmsr 0 - bl invalidate_bats - sync - -#ifdef CONFIG_SYS_L2 - /* init the L2 cache */ - addis r3, r0, L2_INIT@h - ori r3, r3, L2_INIT@l - sync - mtspr l2cr, r3 -#endif -#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx) - .long 0x7e00066c - /* - * dssall instruction, gas doesn't have it yet - * ...for altivec, data stream stop all this probably - * isn't needed unless we warm (software) reboot U-Boot - */ -#endif - -#ifdef CONFIG_SYS_L2 - /* invalidate the L2 cache */ - bl l2cache_invalidate - sync -#endif -#ifdef CONFIG_SYS_BOARD_ASM_INIT - /* do early init */ - bl board_asm_init -#endif - - /* - * Calculate absolute address in FLASH and jump there - *------------------------------------------------------*/ - lis r3, CONFIG_SYS_MONITOR_BASE@h - ori r3, r3, CONFIG_SYS_MONITOR_BASE@l - addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET - mtlr r3 - blr - -in_flash: - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*------------------------------------------------------*/ - - /* perform low-level init */ - /* sdram init, galileo init, etc */ - /* r3: NHR bit from HID0 */ - - /* setup the bats */ - bl setup_bats - sync - - /* - * Cache must be enabled here for stack-in-cache trick. - * This means we need to enable the BATS. - * This means: - * 1) for the EVB, original gt regs need to be mapped - * 2) need to have an IBAT for the 0xf region, - * we are running there! - * Cache should be turned on after BATs, since by default - * everything is write-through. - * The init-mem BAT can be reused after reloc. The old - * gt-regs BAT can be reused after board_init_f calls - * board_early_init_f (EVB only). - */ -#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx) - /* enable address translation */ - bl enable_addr_trans - sync - - /* enable and invalidate the data cache */ - bl l1dcache_enable - sync -#endif -#ifdef CONFIG_SYS_INIT_RAM_LOCK - bl lock_ram_in_cache - sync -#endif - - /* set up the stack pointer in our newly created - * cache-ram (r1) */ - lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h - ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l - - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - GET_GOT /* initialize GOT access */ - - /* run low-level CPU init code (from Flash) */ - bl cpu_init_f - sync - - /* run 1st part of board init code (from Flash) */ - bl board_init_f - sync - - /* NOTREACHED - board_init_f() does not return */ - - .globl invalidate_bats -invalidate_bats: - /* invalidate BATs */ - mtspr IBAT0U, r0 - mtspr IBAT1U, r0 - mtspr IBAT2U, r0 - mtspr IBAT3U, r0 -#ifdef CONFIG_HIGH_BATS - mtspr IBAT4U, r0 - mtspr IBAT5U, r0 - mtspr IBAT6U, r0 - mtspr IBAT7U, r0 -#endif - isync - mtspr DBAT0U, r0 - mtspr DBAT1U, r0 - mtspr DBAT2U, r0 - mtspr DBAT3U, r0 -#ifdef CONFIG_HIGH_BATS - mtspr DBAT4U, r0 - mtspr DBAT5U, r0 - mtspr DBAT6U, r0 - mtspr DBAT7U, r0 -#endif - isync - sync - blr - - /* setup_bats - set them up to some initial state */ - .globl setup_bats -setup_bats: - addis r0, r0, 0x0000 - - /* IBAT 0 */ - addis r4, r0, CONFIG_SYS_IBAT0L@h - ori r4, r4, CONFIG_SYS_IBAT0L@l - addis r3, r0, CONFIG_SYS_IBAT0U@h - ori r3, r3, CONFIG_SYS_IBAT0U@l - mtspr IBAT0L, r4 - mtspr IBAT0U, r3 - isync - - /* DBAT 0 */ - addis r4, r0, CONFIG_SYS_DBAT0L@h - ori r4, r4, CONFIG_SYS_DBAT0L@l - addis r3, r0, CONFIG_SYS_DBAT0U@h - ori r3, r3, CONFIG_SYS_DBAT0U@l - mtspr DBAT0L, r4 - mtspr DBAT0U, r3 - isync - - /* IBAT 1 */ - addis r4, r0, CONFIG_SYS_IBAT1L@h - ori r4, r4, CONFIG_SYS_IBAT1L@l - addis r3, r0, CONFIG_SYS_IBAT1U@h - ori r3, r3, CONFIG_SYS_IBAT1U@l - mtspr IBAT1L, r4 - mtspr IBAT1U, r3 - isync - - /* DBAT 1 */ - addis r4, r0, CONFIG_SYS_DBAT1L@h - ori r4, r4, CONFIG_SYS_DBAT1L@l - addis r3, r0, CONFIG_SYS_DBAT1U@h - ori r3, r3, CONFIG_SYS_DBAT1U@l - mtspr DBAT1L, r4 - mtspr DBAT1U, r3 - isync - - /* IBAT 2 */ - addis r4, r0, CONFIG_SYS_IBAT2L@h - ori r4, r4, CONFIG_SYS_IBAT2L@l - addis r3, r0, CONFIG_SYS_IBAT2U@h - ori r3, r3, CONFIG_SYS_IBAT2U@l - mtspr IBAT2L, r4 - mtspr IBAT2U, r3 - isync - - /* DBAT 2 */ - addis r4, r0, CONFIG_SYS_DBAT2L@h - ori r4, r4, CONFIG_SYS_DBAT2L@l - addis r3, r0, CONFIG_SYS_DBAT2U@h - ori r3, r3, CONFIG_SYS_DBAT2U@l - mtspr DBAT2L, r4 - mtspr DBAT2U, r3 - isync - - /* IBAT 3 */ - addis r4, r0, CONFIG_SYS_IBAT3L@h - ori r4, r4, CONFIG_SYS_IBAT3L@l - addis r3, r0, CONFIG_SYS_IBAT3U@h - ori r3, r3, CONFIG_SYS_IBAT3U@l - mtspr IBAT3L, r4 - mtspr IBAT3U, r3 - isync - - /* DBAT 3 */ - addis r4, r0, CONFIG_SYS_DBAT3L@h - ori r4, r4, CONFIG_SYS_DBAT3L@l - addis r3, r0, CONFIG_SYS_DBAT3U@h - ori r3, r3, CONFIG_SYS_DBAT3U@l - mtspr DBAT3L, r4 - mtspr DBAT3U, r3 - isync - -#ifdef CONFIG_HIGH_BATS - /* IBAT 4 */ - addis r4, r0, CONFIG_SYS_IBAT4L@h - ori r4, r4, CONFIG_SYS_IBAT4L@l - addis r3, r0, CONFIG_SYS_IBAT4U@h - ori r3, r3, CONFIG_SYS_IBAT4U@l - mtspr IBAT4L, r4 - mtspr IBAT4U, r3 - isync - - /* DBAT 4 */ - addis r4, r0, CONFIG_SYS_DBAT4L@h - ori r4, r4, CONFIG_SYS_DBAT4L@l - addis r3, r0, CONFIG_SYS_DBAT4U@h - ori r3, r3, CONFIG_SYS_DBAT4U@l - mtspr DBAT4L, r4 - mtspr DBAT4U, r3 - isync - - /* IBAT 5 */ - addis r4, r0, CONFIG_SYS_IBAT5L@h - ori r4, r4, CONFIG_SYS_IBAT5L@l - addis r3, r0, CONFIG_SYS_IBAT5U@h - ori r3, r3, CONFIG_SYS_IBAT5U@l - mtspr IBAT5L, r4 - mtspr IBAT5U, r3 - isync - - /* DBAT 5 */ - addis r4, r0, CONFIG_SYS_DBAT5L@h - ori r4, r4, CONFIG_SYS_DBAT5L@l - addis r3, r0, CONFIG_SYS_DBAT5U@h - ori r3, r3, CONFIG_SYS_DBAT5U@l - mtspr DBAT5L, r4 - mtspr DBAT5U, r3 - isync - - /* IBAT 6 */ - addis r4, r0, CONFIG_SYS_IBAT6L@h - ori r4, r4, CONFIG_SYS_IBAT6L@l - addis r3, r0, CONFIG_SYS_IBAT6U@h - ori r3, r3, CONFIG_SYS_IBAT6U@l - mtspr IBAT6L, r4 - mtspr IBAT6U, r3 - isync - - /* DBAT 6 */ - addis r4, r0, CONFIG_SYS_DBAT6L@h - ori r4, r4, CONFIG_SYS_DBAT6L@l - addis r3, r0, CONFIG_SYS_DBAT6U@h - ori r3, r3, CONFIG_SYS_DBAT6U@l - mtspr DBAT6L, r4 - mtspr DBAT6U, r3 - isync - - /* IBAT 7 */ - addis r4, r0, CONFIG_SYS_IBAT7L@h - ori r4, r4, CONFIG_SYS_IBAT7L@l - addis r3, r0, CONFIG_SYS_IBAT7U@h - ori r3, r3, CONFIG_SYS_IBAT7U@l - mtspr IBAT7L, r4 - mtspr IBAT7U, r3 - isync - - /* DBAT 7 */ - addis r4, r0, CONFIG_SYS_DBAT7L@h - ori r4, r4, CONFIG_SYS_DBAT7L@l - addis r3, r0, CONFIG_SYS_DBAT7U@h - ori r3, r3, CONFIG_SYS_DBAT7U@l - mtspr DBAT7L, r4 - mtspr DBAT7U, r3 - isync -#endif - - /* bats are done, now invalidate the TLBs */ - - addis r3, 0, 0x0000 - addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */ - - isync - -tlblp: - tlbie r3 - sync - addi r3, r3, 0x1000 - cmp 0, 0, r3, r5 - blt tlblp - - blr - - .globl enable_addr_trans -enable_addr_trans: - /* enable address translation */ - mfmsr r5 - ori r5, r5, (MSR_IR | MSR_DR) - mtmsr r5 - isync - blr - - .globl disable_addr_trans -disable_addr_trans: - /* disable address translation */ - mflr r4 - mfmsr r3 - andi. r0, r3, (MSR_IR | MSR_DR) - beqlr - andc r3, r3, r0 - mtspr SRR0, r4 - mtspr SRR1, r3 - rfi - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - mtspr SPRG2,r22 /* r1 is now kernel sp */ - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - - .globl dc_read -dc_read: - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -/*-----------------------------------------------------------------------*/ -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ -#ifdef CONFIG_ECC - bl board_relocate_rom - sync - mr r3, r10 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ -#else - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b -#endif -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: -#ifdef CONFIG_ECC - bl board_init_ecc -#endif - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -/* clear_bss: */ - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - mr r3, r10 /* Destination Address */ -#if defined(CONFIG_PPMC7XX) - mr r4, r9 /* Use RAM copy of the global data */ -#endif - bl after_reloc - - /* not reached - end relocate_code */ -/*-----------------------------------------------------------------------*/ - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - /* enable execptions from RAM vectors */ - mfmsr r7 - li r8,MSR_IP - andc r7,r7,r8 - mtmsr r7 - - mtlr r4 /* restore link register */ - blr - -#ifdef CONFIG_SYS_INIT_RAM_LOCK -lock_ram_in_cache: - /* Allocate Initial RAM in data cache. - */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ - (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 - mtctr r4 -1: - dcbz r0, r3 - addi r3, r3, 32 - bdnz 1b - - /* Lock the data cache */ - mfspr r0, HID0 - ori r0, r0, 0x1000 - sync - mtspr HID0, r0 - sync - blr - -.globl unlock_ram_in_cache -unlock_ram_in_cache: - /* invalidate the INIT_RAM section */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ - (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 - mtctr r4 -1: icbi r0, r3 - addi r3, r3, 32 - bdnz 1b - sync /* Wait for all icbi to complete on bus */ - isync - - /* Unlock the data cache and invalidate it */ - mfspr r0, HID0 - li r3,0x1000 - andc r0,r0,r3 - li r3,0x0400 - or r0,r0,r3 - sync - mtspr HID0, r0 - sync - blr -#endif diff --git a/arch/powerpc/cpu/74xx_7xx/traps.c b/arch/powerpc/cpu/74xx_7xx/traps.c deleted file mode 100644 index 111c86c..0000000 --- a/arch/powerpc/cpu/74xx_7xx/traps.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * linux/arch/powerpc/kernel/traps.c - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file handles the architecture-dependent parts of hardware exceptions - */ - -#include -#include -#include -#include - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* THIS NEEDS CHANGING to use the board info structure. -*/ -#define END_OF_MEM 0x02000000 - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - printf("\n"); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS:" - " %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP:" - " %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, - regs->msr&MSR_IR ? 1 : 0, - regs->msr&MSR_DR ? 1 : 0); - - printf("\n"); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) - { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) - { - printf("\n"); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); -} - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup; - - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. - */ - if ((fixup = search_exception_table(regs->nip)) != 0) { - regs->nip = fixup; - return; - } - -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - printf("Machine check in kernel mode.\n"); - printf("Caused by (from msr): "); - printf("regs %p ",regs); - switch( regs->msr & 0x000F0000) { - case (0x80000000>>12): - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000>>13): - printf("Transfer error ack signal\n"); - break; - case (0x80000000>>14): - printf("Data parity signal\n"); - break; - case (0x80000000>>15): - printf("Address parity signal\n"); - break; - default: - printf("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ - unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL; - int i, j; - -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - - p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0); - p -= 32; - for (i = 0; i < 256; i+=16) { - printf("%08x: ", (unsigned int)p+i); - for (j = 0; j < 16; j++) { - printf("%02x ", p[i+j]); - } - printf("\n"); - } - - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Software Emulation Exception"); -} - -void UnknownException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -/* Probe an address by reading. If not present, return -1, otherwise - * return 0. - */ -int addr_probe(uint *addr) -{ -#if 0 - int retval; - - __asm__ __volatile__( \ - "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); - - return (retval); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds deleted file mode 100644 index c099849..0000000 --- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2010 Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - .text : - { - arch/powerpc/cpu/74xx_7xx/start.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} -- cgit v1.1