From 5df572f0131cf5e0abd8ce4e8f57841b790c40d4 Mon Sep 17 00:00:00 2001 From: Ying Zhang Date: Mon, 20 May 2013 14:07:23 +0800 Subject: powerpc/mpc85xx: support application without resetvec segment in the linker script For SD/SPI 2-stage bootloader, the On-Chip Rom code loads the SPL into L2 SRAM, then jump to it to begin execution. After that, the SPL loads the final uboot image into DDR, then jump to it to begin execution. The segment .resetvec in the SPL and in final U-boot is useless. So, add new symbols CONFIG_SYS_MPC85XX_NO_RESETVEC for this application. If CONFIG_SYS_MPC85XX_NO_RESETVEC is set, the segment .resetvec is excluded and the segment .bootpg is placed in the previous 4K of the segment .text. Signed-off-by: Ying Zhang Signed-off-by: Andy Fleming --- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 14 ++++++++++++++ arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 ++++++++ 2 files changed, 22 insertions(+) (limited to 'arch/powerpc/cpu') diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index cf6fa7c..4591760 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -26,6 +26,13 @@ #include "config.h" /* CONFIG_BOARDDIR */ OUTPUT_ARCH(powerpc) +#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} +#endif SECTIONS { . = CONFIG_SPL_TEXT_BASE; @@ -68,9 +75,16 @@ SECTIONS #else #error unknown NAND controller #endif +#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC + .bootpg ADDR(.text) - 0x1000 : + { + KEEP(*(.bootpg)) + } :text = 0xffff +#else .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : { KEEP(*(.resetvec)) } = 0xffff +#endif /* * Make sure that the bss segment isn't linked at 0x0, otherwise its diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index 0503dce..2643563 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -95,6 +95,13 @@ SECTIONS . = ALIGN(256); __init_end = .; +#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC + .bootpg ADDR(.text) - 0x1000 : + { + KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg)) + } :text = 0xffff + . = ADDR(.text) + 0x80000; +#else .bootpg RESET_VECTOR_ADDRESS - 0xffc : { arch/powerpc/cpu/mpc85xx/start.o (.bootpg) @@ -117,6 +124,7 @@ SECTIONS #if (RESET_VECTOR_ADDRESS == 0xfffffffc) . |= 0x10; #endif +#endif __bss_start = .; .bss (NOLOAD) : -- cgit v1.1