From 3c016704d9c5418479e68e4690759cb2be6f90d3 Mon Sep 17 00:00:00 2001 From: ken kuo Date: Sat, 8 Jun 2013 11:14:09 +0800 Subject: nds32: Enable two banks of SDRAM on Andes board The original adp-ag101/adp-ag101p initialize only one bank(64MB) by default at boot time, but it is not enough for some application, so increasing to two banks(128M). Signed-off-by: Kuan-Yu Kuo Cc: Macpaul Lin --- arch/nds32/cpu/n1213/ag101/lowlevel_init.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/nds32/cpu/n1213/ag101/lowlevel_init.S') diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S index 29c93fe..55985cf 100644 --- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S @@ -38,6 +38,7 @@ #define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1) #define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2) #define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR) +#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR) #define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1 #define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2 @@ -45,6 +46,7 @@ #define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2 #define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR +#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR /* * parameters for the static memory controller @@ -167,12 +169,12 @@ relo_base: */ led 0x1a write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001100 + write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001140 /* clear empty BSR registers */ led 0x1b li $r4, CONFIG_FTSDMC021_BASE li $r5, 0x0 - swi $r5, [$r4 + FTSDMC021_BANK1_BSR] swi $r5, [$r4 + FTSDMC021_BANK2_BSR] swi $r5, [$r4 + FTSDMC021_BANK3_BSR] @@ -223,6 +225,8 @@ relo_base: * - after remap: flash/rom 0x80000000, sdram: 0x00000000 */ led 0x1c + write32 SDMC_B0_BSR_A, 0x00001000 + write32 SDMC_B1_BSR_A, 0x00001040 setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1 #endif /* #ifdef CONFIG_MEM_REMAP */ -- cgit v1.1