From fa8a485d06188e38abc9c46fbd1be916fe16fb7a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 9 Jul 2016 17:31:14 +0200 Subject: sunxi: Sync sun8i-h3-orangepi-plus.dts with upstream This enables extra USB controllers which enable use of the 3rd USB port on the new Orange Pi Plus 2E variant. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 127 +++++++------------------------- arch/arm/dts/sun8i-h3.dtsi | 10 +++ 2 files changed, 37 insertions(+), 100 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 900ec4f..28f74f6 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -40,26 +40,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ +#include "sun8i-h3-orangepi-2.dts" / { - model = "Xunlong Orange Pi Plus"; + model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -71,75 +58,42 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>; - - status_led { - label = "status:red:user"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_r_opc>; - - tx { - label = "pwr:green:user"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - r_gpio_keys { - compatible = "gpio-keys"; - input-name = "sw4"; - - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; +&ehci2 { + status = "okay"; +}; - sw4@0 { - label = "sw4"; - linux,code = ; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; +&ehci3 { + status = "okay"; }; -&pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; }; -&r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = ; + /* eMMC is missing pull-ups */ + allwinner,pull = ; +}; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; +&ohci1 { + status = "okay"; }; -&ehci1 { +&ohci2 { status = "okay"; }; -&ehci3 { +&ohci3 { status = "okay"; }; @@ -152,33 +106,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; -}; - &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; usb3_vbus-supply = <®_usb3_vbus>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index 6ca5e34..72c0920 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -541,6 +541,16 @@ allwinner,drive = ; allwinner,pull = ; }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ahb_rst: reset@01c202c0 { -- cgit v1.1