From a7e36fc95fa2c915bb95e845c8945ca926575f5b Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:27 +0530 Subject: mtd: nand: omap: remove unused #defines from common omap_gpmc.h OMAP NAND driver can detect Page-size and OOB-size of NAND device from ONFI params or nand_id[] table. And based on that it defines ECC layout. This patch 1) removes following board configs used for defining NAND ECC layout - GPMC_NAND_ECC_LP_x16_LAYOUT (for large page x16 NAND) - GPMC_NAND_ECC_LP_x8_LAYOUT (for large page x8 NAND) - GPMC_NAND_ECC_SP_x16_LAYOUT (for small page x16 NAND) - GPMC_NAND_ECC_SP_x8_LAYOUT (for small page x8 NAND) 2) removes unused #defines in common omap_gpmc.h depending on above configs Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/omap_gpmc.h | 47 ---------------------------------------- 1 file changed, 47 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index 5250109..3caaed8 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -12,53 +12,6 @@ #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1 -/* Generic ECC Layouts */ -/* Large Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ - 9, 10, 11, 12},\ - .oobfree = {\ - {.offset = 13,\ - .length = 51 } } \ -} -#endif - -/* Large Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13},\ - .oobfree = {\ - {.offset = 14,\ - .length = 50 } } \ -} -#endif - -/* Small Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {1, 2, 3},\ - .oobfree = {\ - {.offset = 4,\ - .length = 12 } } \ -} -#endif - -/* Small Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {2, 3, 4},\ - .oobfree = {\ - {.offset = 5,\ - .length = 11 } } \ -} -#endif - enum omap_ecc { /* 1-bit ECC calculation by Software, Error detection by Software */ OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */ -- cgit v1.1