From 1c27b7dcd06e605ed042d928665d26edab8429e4 Mon Sep 17 00:00:00 2001 From: Jens Kuske Date: Tue, 17 Nov 2015 15:12:58 +0100 Subject: sunxi: Add basic H3 support Add initial sun8i H3 support, only uart + mmc are supported for now. Signed-off-by: Jens Kuske Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/board.c | 4 ++++ arch/arm/cpu/armv7/sunxi/cpu_info.c | 2 ++ arch/arm/include/asm/arch-sunxi/gpio.h | 1 + 3 files changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 794b829..0f26cb0 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -72,6 +72,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3) + sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0); + sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I) sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0); diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 05fef32..1e73332 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -69,6 +69,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner A23 (SUN8I)\n"); #elif defined CONFIG_MACH_SUN8I_A33 puts("CPU: Allwinner A33 (SUN8I)\n"); +#elif defined CONFIG_MACH_SUN8I_H3 + puts("CPU: Allwinner H3 (SUN8I)\n"); #elif defined CONFIG_MACH_SUN9I puts("CPU: Allwinner A80 (SUN9I)\n"); #else diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 8382101..7af5e29 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -147,6 +147,7 @@ enum sunxi_gpio_number { #define SUN7I_GPA_GMAC 5 #define SUN6I_GPA_SDC2 5 #define SUN6I_GPA_SDC3 4 +#define SUN8I_H3_GPA_UART0 2 #define SUN4I_GPB_TWI0 2 #define SUN4I_GPB_TWI1 2 -- cgit v1.1 From 0404d53f2f2024312b108a1b692bf668545b772b Mon Sep 17 00:00:00 2001 From: Jens Kuske Date: Tue, 17 Nov 2015 15:12:59 +0100 Subject: sunxi: Add H3 DRAM initialization support Based on existing A23/A33 code and the original H3 boot0. Signed-off-by: Jens Kuske Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c | 469 ++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 3 + arch/arm/include/asm/arch-sunxi/dram.h | 2 + arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h | 185 ++++++++++ 5 files changed, 660 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 459d5d8..33c76ef 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -49,5 +49,6 @@ obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o +obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c new file mode 100644 index 0000000..b721d60 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c @@ -0,0 +1,469 @@ +/* + * sun8i H3 platform dram controller init + * + * (C) Copyright 2007-2015 Allwinner Technology Co. + * Jerry Wang + * (C) Copyright 2015 Vishnu Patekar + * (C) Copyright 2015 Hans de Goede + * (C) Copyright 2015 Jens Kuske + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include + +struct dram_para { + u32 read_delays; + u32 write_delays; + u16 page_size; + u8 bus_width; + u8 dual_rank; + u8 row_bits; +}; + +static inline int ns_to_t(int nanoseconds) +{ + const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2; + + return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000); +} + +static u32 bin_to_mgray(int val) +{ + static const u8 lookup_table[32] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, + 0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, + 0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d, + 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11, + }; + + return lookup_table[clamp(val, 0, 31)]; +} + +static int mgray_to_bin(u32 val) +{ + static const u8 lookup_table[32] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, + 0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b, + 0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b, + 0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15, + }; + + return lookup_table[val & 0x1f]; +} + +static void mctl_phy_init(u32 val) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + writel(val | PIR_INIT, &mctl_ctl->pir); + mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1); +} + +static void mctl_dq_delay(u32 read, u32 write) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + int i, j; + u32 val; + + for (i = 0; i < 4; i++) { + val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) | + DATX_IOCR_READ_DELAY((read >> (i * 4)) & 0xf); + + for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++) + setbits_le32(&mctl_ctl->datx[i].iocr[j], val); + } + + clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26); + + for (i = 0; i < 4; i++) { + val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) | + DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf); + + setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQS], val); + setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN], val); + } + + setbits_le32(&mctl_ctl->pgcr[0], 1 << 26); + + udelay(1); +} + +static void mctl_set_master_priority(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + /* enable bandwidth limit windows and set windows size 1us */ + writel(0x00010190, &mctl_com->bwcr); + + /* set cpu high priority */ + writel(0x00000001, &mctl_com->mapr); + + writel(0x0200000d, &mctl_com->mcr[0][0]); + writel(0x00800100, &mctl_com->mcr[0][1]); + writel(0x06000009, &mctl_com->mcr[1][0]); + writel(0x01000400, &mctl_com->mcr[1][1]); + writel(0x0200000d, &mctl_com->mcr[2][0]); + writel(0x00600100, &mctl_com->mcr[2][1]); + writel(0x0100000d, &mctl_com->mcr[3][0]); + writel(0x00200080, &mctl_com->mcr[3][1]); + writel(0x07000009, &mctl_com->mcr[4][0]); + writel(0x01000640, &mctl_com->mcr[4][1]); + writel(0x0100000d, &mctl_com->mcr[5][0]); + writel(0x00200080, &mctl_com->mcr[5][1]); + writel(0x01000009, &mctl_com->mcr[6][0]); + writel(0x00400080, &mctl_com->mcr[6][1]); + writel(0x0100000d, &mctl_com->mcr[7][0]); + writel(0x00400080, &mctl_com->mcr[7][1]); + writel(0x0100000d, &mctl_com->mcr[8][0]); + writel(0x00400080, &mctl_com->mcr[8][1]); + writel(0x04000009, &mctl_com->mcr[9][0]); + writel(0x00400100, &mctl_com->mcr[9][1]); + writel(0x2000030d, &mctl_com->mcr[10][0]); + writel(0x04001800, &mctl_com->mcr[10][1]); + writel(0x04000009, &mctl_com->mcr[11][0]); + writel(0x00400120, &mctl_com->mcr[11][1]); +} + +static void mctl_set_timing_params(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + u8 tccd = 2; + u8 tfaw = ns_to_t(50); + u8 trrd = max(ns_to_t(10), 4); + u8 trcd = ns_to_t(15); + u8 trc = ns_to_t(53); + u8 txp = max(ns_to_t(8), 3); + u8 twtr = max(ns_to_t(8), 4); + u8 trtp = max(ns_to_t(8), 4); + u8 twr = max(ns_to_t(15), 3); + u8 trp = ns_to_t(15); + u8 tras = ns_to_t(38); + u16 trefi = ns_to_t(7800) / 32; + u16 trfc = ns_to_t(350); + + u8 tmrw = 0; + u8 tmrd = 4; + u8 tmod = 12; + u8 tcke = 3; + u8 tcksrx = 5; + u8 tcksre = 5; + u8 tckesr = 4; + u8 trasmax = 24; + + u8 tcl = 6; /* CL 12 */ + u8 tcwl = 4; /* CWL 8 */ + u8 t_rdata_en = 4; + u8 wr_latency = 2; + + u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */ + u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */ + u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ + u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ + + u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */ + u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */ + u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */ + + /* set mode register */ + writel(0x1c70, &mctl_ctl->mr[0]); /* CL=11, WR=12 */ + writel(0x40, &mctl_ctl->mr[1]); + writel(0x18, &mctl_ctl->mr[2]); /* CWL=8 */ + writel(0x0, &mctl_ctl->mr[3]); + + /* set DRAM timing */ + writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) | + DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras), + &mctl_ctl->dramtmg[0]); + writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc), + &mctl_ctl->dramtmg[1]); + writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) | + DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd), + &mctl_ctl->dramtmg[2]); + writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod), + &mctl_ctl->dramtmg[3]); + writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) | + DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]); + writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) | + DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke), + &mctl_ctl->dramtmg[5]); + + /* set two rank timing */ + clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0), + (0x66 << 8) | (0x10 << 0)); + + /* set PHY interface timing, write latency and read latency configure */ + writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) | + (wr_latency << 0), &mctl_ctl->pitmg[0]); + + /* set PHY timing, PTR0-2 use default */ + writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]); + writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]); + + /* set refresh timing */ + writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg); +} + +static void mctl_zq_calibration(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + int i; + u16 zq_val[6]; + u8 val; + + writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]); + + for (i = 0; i < 6; i++) { + u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf; + + writel((zq << 20) | (zq << 16) | (zq << 12) | + (zq << 8) | (zq << 4) | (zq << 0), + &mctl_ctl->zqcr); + + writel(PIR_CLRSR, &mctl_ctl->pir); + mctl_phy_init(PIR_ZCAL); + + zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff; + writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]); + + writel(PIR_CLRSR, &mctl_ctl->pir); + mctl_phy_init(PIR_ZCAL); + + val = readl(&mctl_ctl->zqdr[0]) >> 24; + zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8; + } + + writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]); + writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]); + writel((zq_val[5] << 16) | zq_val[4], &mctl_ctl->zqdr[2]); +} + +static void mctl_set_cr(struct dram_para *para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + writel(MCTL_CR_BL8 | MCTL_CR_2T | MCTL_CR_DDR3 | MCTL_CR_INTERLEAVED | + MCTL_CR_EIGHT_BANKS | MCTL_CR_BUS_WIDTH(para->bus_width) | + (para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) | + MCTL_CR_PAGE_SIZE(para->page_size) | + MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr); +} + +static void mctl_sys_init(struct dram_para *para) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE); + clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET); + clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN); + udelay(10); + + clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST); + udelay(1000); + + clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false); + clrsetbits_le32(&ccm->dram_clk_cfg, + CCM_DRAMCLK_CFG_DIV_MASK | CCM_DRAMCLK_CFG_SRC_MASK, + CCM_DRAMCLK_CFG_DIV(1) | CCM_DRAMCLK_CFG_SRC_PLL5 | + CCM_DRAMCLK_CFG_UPD); + mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0); + + setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET); + setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE); + + setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST); + udelay(10); + + writel(0xc00e, &mctl_ctl->clken); + udelay(500); +} + +static int mctl_channel_init(struct dram_para *para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + unsigned int i; + + mctl_set_cr(para); + mctl_set_timing_params(para); + mctl_set_master_priority(); + + /* setting VTC, default disable all VT */ + clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f); + clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26); + + /* increase DFI_PHY_UPD clock */ + writel(PROTECT_MAGIC, &mctl_com->protect); + udelay(100); + clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16); + writel(0x0, &mctl_com->protect); + udelay(100); + + /* set dramc odt */ + for (i = 0; i < 4; i++) + clrsetbits_le32(&mctl_ctl->datx[i].gcr, (0x3 << 4) | + (0x1 << 1) | (0x3 << 2) | (0x3 << 12) | + (0x3 << 14), + IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x2); + + /* AC PDR should always ON */ + setbits_le32(&mctl_ctl->aciocr, 0x1 << 1); + + /* set DQS auto gating PD mode */ + setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6); + + /* dx ddr_clk & hdr_clk dynamic mode */ + clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12)); + + /* dphy & aphy phase select 270 degree */ + clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8), + (0x1 << 10) | (0x2 << 8)); + + /* set half DQ */ + if (para->bus_width != 32) { + writel(0x0, &mctl_ctl->datx[2].gcr); + writel(0x0, &mctl_ctl->datx[3].gcr); + } + + /* data training configuration */ + clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, + (para->dual_rank ? 0x3 : 0x1) << 24); + + + if (para->read_delays || para->write_delays) { + mctl_dq_delay(para->read_delays, para->write_delays); + udelay(50); + } + + mctl_zq_calibration(para); + + mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST | PIR_DRAMRST | + PIR_DRAMINIT | PIR_QSGATE); + + /* detect ranks and bus width */ + if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) { + /* only one rank */ + if (((readl(&mctl_ctl->datx[0].gsr[0]) >> 24) & 0x2) || + ((readl(&mctl_ctl->datx[1].gsr[0]) >> 24) & 0x2)) { + clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24); + para->dual_rank = 0; + } + + /* only half DQ width */ + if (((readl(&mctl_ctl->datx[2].gsr[0]) >> 24) & 0x1) || + ((readl(&mctl_ctl->datx[3].gsr[0]) >> 24) & 0x1)) { + writel(0x0, &mctl_ctl->datx[2].gcr); + writel(0x0, &mctl_ctl->datx[3].gcr); + para->bus_width = 16; + } + + mctl_set_cr(para); + udelay(20); + + /* re-train */ + mctl_phy_init(PIR_QSGATE); + if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) + return 1; + } + + /* check the dramc status */ + mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1); + + /* liuke added for refresh debug */ + setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31); + udelay(10); + clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31); + udelay(10); + + /* set PGCR3, CKE polarity */ + writel(0x00aa0060, &mctl_ctl->pgcr[3]); + + /* power down zq calibration module for power save */ + setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN); + + /* enable master access */ + writel(0xffffffff, &mctl_com->maer); + + return 0; +} + +static void mctl_auto_detect_dram_size(struct dram_para *para) +{ + /* detect row address bits */ + para->page_size = 512; + para->row_bits = 16; + mctl_set_cr(para); + + for (para->row_bits = 11; para->row_bits < 16; para->row_bits++) + if (mctl_mem_matches((1 << (para->row_bits + 3)) * para->page_size)) + break; + + /* detect page size */ + para->page_size = 8192; + mctl_set_cr(para); + + for (para->page_size = 512; para->page_size < 8192; para->page_size *= 2) + if (mctl_mem_matches(para->page_size)) + break; +} + +unsigned long sunxi_dram_init(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + struct dram_para para = { + .read_delays = 0x00007979, + .write_delays = 0x6aaa0000, + .dual_rank = 0, + .bus_width = 32, + .row_bits = 15, + .page_size = 4096, + }; + + mctl_sys_init(¶); + if (mctl_channel_init(¶)) + return 0; + + if (para.dual_rank) + writel(0x00000303, &mctl_ctl->odtmap); + else + writel(0x00000201, &mctl_ctl->odtmap); + udelay(1); + + /* odt delay */ + writel(0x0c000400, &mctl_ctl->odtcfg); + + /* clear credit value */ + setbits_le32(&mctl_com->cccr, 1 << 31); + udelay(10); + + mctl_auto_detect_dram_size(¶); + mctl_set_cr(¶); + + return (1 << (para.row_bits + 3)) * para.page_size * + (para.dual_rank ? 2 : 1); +} diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 9b7b90c..584d351 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -282,6 +282,9 @@ struct sunxi_ccm_reg { #define CCM_DRAMCLK_CFG_DIV_MASK (0xf << 0) #define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) #define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8) +#define CCM_DRAMCLK_CFG_SRC_PLL5 (0x0 << 20) +#define CCM_DRAMCLK_CFG_SRC_PLL6x2 (0x1 << 20) +#define CCM_DRAMCLK_CFG_SRC_MASK (0x3 << 20) #define CCM_DRAMCLK_CFG_UPD (0x1 << 16) #define CCM_DRAMCLK_CFG_RST (0x1 << 31) diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index 273f80f..b3c1688 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -22,6 +22,8 @@ #include #elif defined(CONFIG_MACH_SUN8I_A33) #include +#elif defined(CONFIG_MACH_SUN8I_H3) +#include #else #include #endif diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h new file mode 100644 index 0000000..d0f2b8a --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h @@ -0,0 +1,185 @@ +/* + * sun8i H3 platform dram controller register and constant defines + * + * (C) Copyright 2007-2015 Allwinner Technology Co. + * Jerry Wang + * (C) Copyright 2015 Vishnu Patekar + * (C) Copyright 2014-2015 Hans de Goede + * (C) Copyright 2015 Jens Kuske + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_SUN8I_H3_H +#define _SUNXI_DRAM_SUN8I_H3_H + +struct sunxi_mctl_com_reg { + u32 cr; /* 0x00 control register */ + u8 res0[0xc]; /* 0x04 */ + u32 mcr[16][2]; /* 0x10 */ + u32 bwcr; /* 0x90 bandwidth control register */ + u32 maer; /* 0x94 master enable register */ + u32 mapr; /* 0x98 master priority register */ + u32 mcgcr; /* 0x9c */ + u32 cpu_bwcr; /* 0xa0 */ + u32 gpu_bwcr; /* 0xa4 */ + u32 ve_bwcr; /* 0xa8 */ + u32 disp_bwcr; /* 0xac */ + u32 other_bwcr; /* 0xb0 */ + u32 total_bwcr; /* 0xb4 */ + u8 res1[0x8]; /* 0xb8 */ + u32 swonr; /* 0xc0 */ + u32 swoffr; /* 0xc4 */ + u8 res2[0x8]; /* 0xc8 */ + u32 cccr; /* 0xd0 */ + u8 res3[0x72c]; /* 0xd4 */ + u32 protect; /* 0x800 */ +}; + +#define MCTL_CR_BL8 (0x4 << 20) + +#define MCTL_CR_1T (0x1 << 19) +#define MCTL_CR_2T (0x0 << 19) + +#define MCTL_CR_LPDDR3 (0x7 << 16) +#define MCTL_CR_LPDDR2 (0x6 << 16) +#define MCTL_CR_DDR3 (0x3 << 16) +#define MCTL_CR_DDR2 (0x2 << 16) + +#define MCTL_CR_SEQUENTIAL (0x1 << 15) +#define MCTL_CR_INTERLEAVED (0x0 << 15) + +#define MCTL_CR_32BIT (0x1 << 12) +#define MCTL_CR_16BIT (0x0 << 12) +#define MCTL_CR_BUS_WIDTH(x) ((x) == 32 ? MCTL_CR_32BIT : MCTL_CR_16BIT) + +#define MCTL_CR_PAGE_SIZE(x) ((fls(x) - 4) << 8) +#define MCTL_CR_ROW_BITS(x) (((x) - 1) << 4) +#define MCTL_CR_EIGHT_BANKS (0x1 << 2) +#define MCTL_CR_FOUR_BANKS (0x0 << 2) +#define MCTL_CR_DUAL_RANK (0x1 << 0) +#define MCTL_CR_SINGLE_RANK (0x0 << 0) + +#define PROTECT_MAGIC (0x94be6fa3) + +struct sunxi_mctl_ctl_reg { + u32 pir; /* 0x00 PHY initialization register */ + u32 pwrctl; /* 0x04 */ + u32 mrctrl; /* 0x08 */ + u32 clken; /* 0x0c */ + u32 pgsr[2]; /* 0x10 PHY general status registers */ + u32 statr; /* 0x18 */ + u8 res1[0x14]; /* 0x1c */ + u32 mr[4]; /* 0x30 mode registers */ + u32 pllgcr; /* 0x40 */ + u32 ptr[5]; /* 0x44 PHY timing registers */ + u32 dramtmg[9]; /* 0x58 DRAM timing registers */ + u32 odtcfg; /* 0x7c */ + u32 pitmg[2]; /* 0x80 PHY interface timing registers */ + u8 res2[0x4]; /* 0x88 */ + u32 rfshctl0; /* 0x8c */ + u32 rfshtmg; /* 0x90 refresh timing */ + u32 rfshctl1; /* 0x94 */ + u32 pwrtmg; /* 0x98 */ + u8 res3[0x20]; /* 0x9c */ + u32 dqsgmr; /* 0xbc */ + u32 dtcr; /* 0xc0 */ + u32 dtar[4]; /* 0xc4 */ + u32 dtdr[2]; /* 0xd4 */ + u32 dtmr[2]; /* 0xdc */ + u32 dtbmr; /* 0xe4 */ + u32 catr[2]; /* 0xe8 */ + u32 dtedr[2]; /* 0xf0 */ + u8 res4[0x8]; /* 0xf8 */ + u32 pgcr[4]; /* 0x100 PHY general configuration registers */ + u32 iovcr[2]; /* 0x110 */ + u32 dqsdr; /* 0x118 */ + u32 dxccr; /* 0x11c */ + u32 odtmap; /* 0x120 */ + u32 zqctl[2]; /* 0x124 */ + u8 res6[0x14]; /* 0x12c */ + u32 zqcr; /* 0x140 ZQ control register */ + u32 zqsr; /* 0x144 ZQ status register */ + u32 zqdr[3]; /* 0x148 ZQ data registers */ + u8 res7[0x6c]; /* 0x154 */ + u32 sched; /* 0x1c0 */ + u32 perfhpr[2]; /* 0x1c4 */ + u32 perflpr[2]; /* 0x1cc */ + u32 perfwr[2]; /* 0x1d4 */ + u8 res8[0x2c]; /* 0x1dc */ + u32 aciocr; /* 0x208 */ + u8 res9[0xf4]; /* 0x20c */ + struct { /* 0x300 DATX8 modules*/ + u32 mdlr; /* 0x00 */ + u32 lcdlr[3]; /* 0x04 */ + u32 iocr[11]; /* 0x10 IO configuration register */ + u32 bdlr6; /* 0x3c */ + u32 gtr; /* 0x40 */ + u32 gcr; /* 0x44 */ + u32 gsr[3]; /* 0x48 */ + u8 res0[0x2c]; /* 0x54 */ + } datx[4]; + u8 res10[0x388]; /* 0x500 */ + u32 upd2; /* 0x888 */ +}; + +#define PTR3_TDINIT1(x) ((x) << 20) +#define PTR3_TDINIT0(x) ((x) << 0) + +#define PTR4_TDINIT3(x) ((x) << 20) +#define PTR4_TDINIT2(x) ((x) << 0) + +#define DRAMTMG0_TWTP(x) ((x) << 24) +#define DRAMTMG0_TFAW(x) ((x) << 16) +#define DRAMTMG0_TRAS_MAX(x) ((x) << 8) +#define DRAMTMG0_TRAS(x) ((x) << 0) + +#define DRAMTMG1_TXP(x) ((x) << 16) +#define DRAMTMG1_TRTP(x) ((x) << 8) +#define DRAMTMG1_TRC(x) ((x) << 0) + +#define DRAMTMG2_TCWL(x) ((x) << 24) +#define DRAMTMG2_TCL(x) ((x) << 16) +#define DRAMTMG2_TRD2WR(x) ((x) << 8) +#define DRAMTMG2_TWR2RD(x) ((x) << 0) + +#define DRAMTMG3_TMRW(x) ((x) << 16) +#define DRAMTMG3_TMRD(x) ((x) << 12) +#define DRAMTMG3_TMOD(x) ((x) << 0) + +#define DRAMTMG4_TRCD(x) ((x) << 24) +#define DRAMTMG4_TCCD(x) ((x) << 16) +#define DRAMTMG4_TRRD(x) ((x) << 8) +#define DRAMTMG4_TRP(x) ((x) << 0) + +#define DRAMTMG5_TCKSRX(x) ((x) << 24) +#define DRAMTMG5_TCKSRE(x) ((x) << 16) +#define DRAMTMG5_TCKESR(x) ((x) << 8) +#define DRAMTMG5_TCKE(x) ((x) << 0) + +#define RFSHTMG_TREFI(x) ((x) << 16) +#define RFSHTMG_TRFC(x) ((x) << 0) + +#define PIR_CLRSR (0x1 << 27) /* clear status registers */ +#define PIR_QSGATE (0x1 << 10) /* Read DQS gate training */ +#define PIR_DRAMINIT (0x1 << 8) /* DRAM initialization */ +#define PIR_DRAMRST (0x1 << 7) /* DRAM reset */ +#define PIR_PHYRST (0x1 << 6) /* PHY reset */ +#define PIR_DCAL (0x1 << 5) /* DDL calibration */ +#define PIR_PLLINIT (0x1 << 4) /* PLL initialization */ +#define PIR_ZCAL (0x1 << 1) /* ZQ calibration */ +#define PIR_INIT (0x1 << 0) /* PHY initialization trigger */ + +#define PGSR_INIT_DONE (0x1 << 0) /* PHY init done */ + +#define ZQCR_PWRDOWN (0x1 << 31) /* ZQ power down */ + +#define DATX_IOCR_DQ(x) (x) /* DQ0-7 IOCR index */ +#define DATX_IOCR_DM (8) /* DM IOCR index */ +#define DATX_IOCR_DQS (9) /* DQS IOCR index */ +#define DATX_IOCR_DQSN (10) /* DQSN IOCR index */ + +#define DATX_IOCR_WRITE_DELAY(x) ((x) << 8) +#define DATX_IOCR_READ_DELAY(x) ((x) << 0) + +#endif /* _SUNXI_DRAM_SUN8I_H3_H */ -- cgit v1.1 From 52d093112a307b2dd1ae46f8bd6ba7904760ac57 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Fri, 20 Nov 2015 07:07:48 +0200 Subject: sunxi: clock: Set AHB1 clock frequency to 200MHz on Allwinner H3 The 3.4 kernel from the Allwinner SDK is clocking AHB1 at 200MHz on Allwinner H3 and using PLL6 as the clock source (PLL6/3). This can be verified by reading the value of the AHB1_APB1_CFG_REG register via /dev/mem. It always reads as 0x3180 regardless of the current cpufreq operating point. So this configuration should be safe for use in U-Boot too. PLL6 also needs to be configured before it is used as the clock source, according to the "CCU / Programming Guidelines" section of the Allwinner manual. The current low AHB1 clock speed is limiting the USB transfer speed when booting via FEL. This patch can increase the FEL USB transfer speed from ~510 KB/s to ~950 KB/s. Signed-off-by: Siarhei Siamashka Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 6 ++++-- arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 7 ++++++- 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 3ab3b31..916ee48 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -34,9 +34,11 @@ void clock_init_safe(void) clock_set_pll1(408000000); - writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); - writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); + while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_CTRL_LOCK)) + ; + + writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 584d351..09337a1 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -201,6 +201,7 @@ struct sunxi_ccm_reg { #define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) #define CCM_PLL6_CTRL_K_SHIFT 4 #define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) +#define CCM_PLL6_CTRL_LOCK (1 << 28) #define CCM_MIPI_PLL_CTRL_M_SHIFT 0 #define CCM_MIPI_PLL_CTRL_M_MASK (0xf << CCM_MIPI_PLL_CTRL_M_SHIFT) @@ -219,7 +220,11 @@ struct sunxi_ccm_reg { #define CCM_PLL11_CTRL_UPD (0x1 << 30) #define CCM_PLL11_CTRL_EN (0x1 << 31) -#define AHB1_ABP1_DIV_DEFAULT 0x00002020 +#if defined CONFIG_MACH_SUN8I_H3 +#define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */ +#else +#define AHB1_ABP1_DIV_DEFAULT 0x00002020 /* AHB1=AXI/4, APB1=AHB1/2 */ +#endif #define AXI_GATE_OFFSET_DRAM 0 -- cgit v1.1 From d6e6d4b3a93d15d1fc5b40d9d204e60290ff9087 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 20 Nov 2015 16:03:56 +0100 Subject: sunxi: Add H3 dts[i] files These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede --- arch/arm/dts/Makefile | 3 + arch/arm/dts/sun8i-h3-orangepi-pc.dts | 106 ++++++ arch/arm/dts/sun8i-h3-orangepi-plus.dts | 121 +++++++ arch/arm/dts/sun8i-h3.dtsi | 595 ++++++++++++++++++++++++++++++++ 4 files changed, 825 insertions(+) create mode 100644 arch/arm/dts/sun8i-h3-orangepi-pc.dts create mode 100644 arch/arm/dts/sun8i-h3-orangepi-plus.dts create mode 100644 arch/arm/dts/sun8i-h3.dtsi (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9542fff..ca9c196 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -170,6 +170,9 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb +dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-orangepi-pc.dtb \ + sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts new file mode 100644 index 0000000..4b25dcc --- /dev/null +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2015 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Xunlong Orange Pi PC"; + compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts new file mode 100644 index 0000000..1cb6c66 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2015 Jens Kuske + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Xunlong Orange Pi Plus"; + compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_pin_a>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&pio { + usb3_vbus_pin_a: usb3_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb3_vbus-supply = <®_usb3_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi new file mode 100644 index 0000000..0faa38a --- /dev/null +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -0,0 +1,595 @@ +/* + * Copyright (C) 2015 Jens Kuske + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include +#include + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll5: pll5_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2", "pll6d2"; + }; + + pll8: clk@01c20044 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20044 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8", "pll8x2"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + ahb2: ahb2_clk@01c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6 2>; + clock-output-names = "ahb2"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + apb2: apb2_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2"; + }; + + bus_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-h3-bus-gates-clk"; + reg = <0x01c20060 0x14>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <5>, <6>, <8>, + <9>, <10>, <13>, + <14>, <17>, <18>, + <19>, <20>, + <21>, <23>, + <24>, <25>, + <26>, <27>, + <28>, <29>, + <30>, <31>, <32>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <52>, <53>, + <54>, <64>, + <65>, <69>, <72>, + <76>, <77>, <78>, + <96>, <97>, <98>, + <112>, <113>, + <114>, <115>, <116>, + <128>, <135>; + clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0", + "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand", + "ahb1_sdram", "ahb2_gmac", "ahb1_ts", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", + "ahb1_otg_ehci0", "ahb1_ehic1", + "ahb1_ehic2", "ahb1_ehic3", + "ahb1_otg_ohci0", "ahb2_ohic1", + "ahb2_ohic2", "ahb2_ohic3", "ahb1_ve", + "ahb1_lcd0", "ahb1_lcd1", "ahb1_deint", + "ahb1_csi", "ahb1_tve", "ahb1_hdmi", + "ahb1_de", "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "apb1_codec", + "apb1_spdif", "apb1_pio", "apb1_ths", + "apb1_i2s0", "apb1_i2s1", "apb1_i2s2", + "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", "apb2_scr", + "ahb1_ephy", "ahb1_dbg"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", + "usb_phy2", "usb_phy3", + "usb_ohci0", "usb_ohci1", + "usb_ohci2", "usb_ohci3"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&bus_gates 6>; + resets = <&bus_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&bus_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&bus_rst 8>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&bus_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&bus_rst 9>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&bus_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&bus_rst 10>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&usb_clk 8>, + <&usb_clk 9>, + <&usb_clk 10>, + <&usb_clk 11>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>, + <&usb_clk 2>, + <&usb_clk 3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = ; + clocks = <&bus_gates 25>, <&bus_gates 29>; + resets = <&bus_rst 25>, <&bus_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = ; + clocks = <&bus_gates 29>, <&bus_gates 25>, + <&usb_clk 17>; + resets = <&bus_rst 29>, <&bus_rst 25>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@01c1c000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = ; + clocks = <&bus_gates 26>, <&bus_gates 30>; + resets = <&bus_rst 26>, <&bus_rst 30>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = ; + clocks = <&bus_gates 30>, <&bus_gates 26>, + <&usb_clk 18>; + resets = <&bus_rst 30>, <&bus_rst 26>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci3: usb@01c1d000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1d000 0x100>; + interrupts = ; + clocks = <&bus_gates 27>, <&bus_gates 31>; + resets = <&bus_rst 27>, <&bus_rst 31>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@01c1d400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1d400 0x100>; + interrupts = ; + clocks = <&bus_gates 31>, <&bus_gates 27>, + <&usb_clk 19>; + resets = <&bus_rst 31>, <&bus_rst 27>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-h3-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = , + ; + clocks = <&bus_gates 69>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PF6"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + + bus_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun8i-h3-bus-reset"; + reg = <0x01c202c0 0x1c>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 112>; + resets = <&bus_rst 144>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 113>; + resets = <&bus_rst 145>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 114>; + resets = <&bus_rst 146>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&bus_gates 115>; + resets = <&bus_rst 147>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = , + ; + }; + }; +}; -- cgit v1.1 From aa56cb374de8ae83f3280fdd6c280724228b86d7 Mon Sep 17 00:00:00 2001 From: Jelle de Jong Date: Sun, 18 Oct 2015 16:34:13 +0200 Subject: sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun7i-a20-lamobo-r1.dts | 297 +++++++++++++++++++++++++++++++++++ 2 files changed, 298 insertions(+) create mode 100644 arch/arm/dts/sun7i-a20-lamobo-r1.dts (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ca9c196..65e76ac 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -147,6 +147,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-m5.dtb \ sun7i-a20-mk808c.dtb \ diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts new file mode 100644 index 0000000..975b0b2 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -0,0 +1,297 @@ +/* + * Copyright 2015 Jelle de Jong + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Lamobo R1"; + compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_lamobo_r1>; + + green { + label = "lamobo_r1:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PB3"; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1350000 + 720000 1250000 + 528000 1150000 + 312000 1100000 + 144000 1050000 + >; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_lamobo_r1: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 1 3 0>; /* PB3 */ + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.1