From f5f1f614bda83fae868d5634f86e0098162ceb3b Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Tue, 19 Nov 2013 11:02:15 +0530 Subject: mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes chip->ecc.hwctl() is used for preparing the H/W controller before read/write NAND accesses (like assigning data-buf, enabling ECC scheme configs, etc.) Though all ECC schemes in OMAP NAND driver use GPMC controller for generating ECC syndrome (for both Read/Write accesses). But but in current code HAM1_ECC and BCHx_ECC schemes implement individual function to achieve this. This patch (1) removes omap_hwecc_init() and omap_hwecc_init_bch() as chip->ecc.hwctl will re-initializeGPMC before every read/write call. omap_hwecc_init_bch() -> omap_enable_ecc_bch() (2) merges the GPMC configuration code for all ECC schemes into single omap_enable_hwecc(), thus adding scalability for future ECC schemes. omap_enable_hwecc() + omap_enable_ecc_bch() -> omap_enable_hwecc() Signed-off-by: Pekon Gupta --- arch/arm/include/asm/omap_gpmc.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index d4143ec..6ce5e65 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -14,13 +14,6 @@ #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1 -#define ECCCLEAR (0x1 << 8) -#define ECCRESULTREG1 (0x1 << 0) -#define ECCSIZE512BYTE 0xFF -#define ECCSIZE1 (ECCSIZE512BYTE << 22) -#define ECCSIZE0 (ECCSIZE512BYTE << 12) -#define ECCSIZE0SEL (0x000 << 0) - /* Generic ECC Layouts */ /* Large Page x8 NAND device Layout */ #ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -- cgit v1.1 From 345d3c0f01172995da749fb9ac57faa8b639cfdc Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 24 Feb 2014 11:16:31 +0100 Subject: mmc: zynq: Add OF initialization support Enable initialize sdhci from DTB. Signed-off-by: Michal Simek --- arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 0a2ba05..a68e1b3 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -19,5 +19,6 @@ extern void zynq_ddrc_init(void); /* Driver extern functions */ extern int zynq_sdhci_init(u32 regbase); +extern int zynq_sdhci_of_init(const void *blob); #endif /* _SYS_PROTO_H_ */ -- cgit v1.1 From 1ace4022394eacbdae12e7275c445699f8ad4833 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 26 Feb 2014 17:47:58 +0400 Subject: sizes.h - consolidate for all architectures Copied from Linux sources "include/linux/sizes.h" commit 413541dd66d51f791a0b169d9b9014e4f56be13c Signed-off-by: Alexey Brodkin Cc: Vineet Gupta Cc: Tom Rini Cc: Stefan Roese Cc: Albert Aribaud Acked-by: Tom Rini Acked-by: Stefan Roese [trini: Add bcm Kona platforms to the patch] Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/kona-common/hwinit-common.c | 2 +- arch/arm/cpu/armv7/omap-common/hwinit-common.c | 2 +- arch/arm/cpu/armv7/omap4/hwinit.c | 2 +- arch/arm/cpu/armv7/omap5/hwinit.c | 2 +- arch/arm/cpu/at91-common/phy.c | 2 +- arch/arm/include/asm/arch-davinci/hardware.h | 2 +- arch/arm/include/asm/arch-mb86r0x/hardware.h | 2 +- arch/arm/include/asm/arch-tnetv107x/hardware.h | 2 +- arch/arm/include/asm/sizes.h | 39 -------------------------- 9 files changed, 8 insertions(+), 47 deletions(-) delete mode 100644 arch/arm/include/asm/sizes.h (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/kona-common/hwinit-common.c b/arch/arm/cpu/armv7/kona-common/hwinit-common.c index f8b1e06..2b3a840 100644 --- a/arch/arm/cpu/armv7/kona-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/kona-common/hwinit-common.c @@ -5,7 +5,7 @@ */ #include -#include +#include #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index ade744e..8ebc0ce 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index b0598a0..db16548 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 737d23c..93feb16 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/cpu/at91-common/phy.c b/arch/arm/cpu/at91-common/phy.c index 3b6c60c..2cba716 100644 --- a/arch/arm/cpu/at91-common/phy.c +++ b/arch/arm/cpu/at91-common/phy.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 27b1844..98fe56e 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -15,7 +15,7 @@ #define __ASM_ARCH_HARDWARE_H #include -#include +#include #define REG(addr) (*(volatile unsigned int *)(addr)) #define REG_P(addr) ((volatile unsigned int *)(addr)) diff --git a/arch/arm/include/asm/arch-mb86r0x/hardware.h b/arch/arm/include/asm/arch-mb86r0x/hardware.h index c0e3f20..42a52bc 100644 --- a/arch/arm/include/asm/arch-mb86r0x/hardware.h +++ b/arch/arm/include/asm/arch-mb86r0x/hardware.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include +#include #include #endif diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h index aed6c46..2a7ca4e 100644 --- a/arch/arm/include/asm/arch-tnetv107x/hardware.h +++ b/arch/arm/include/asm/arch-tnetv107x/hardware.h @@ -9,7 +9,7 @@ #ifndef __ASSEMBLY__ -#include +#include #define ASYNC_EMIF_NUM_CS 4 #define ASYNC_EMIF_MODE_NOR 0 diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h deleted file mode 100644 index 28cf5ea..0000000 --- a/arch/arm/include/asm/sizes.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_32K 0x00008000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_31M 0x01F00000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ -- cgit v1.1 From a86cf89c765d99c39b397abe3d9926ab3593f57a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 27 Feb 2014 22:40:34 +0900 Subject: kbuild: consolidate PLATFORM_LIBS We had switched to Kbuild so now we can specify PLATFORM_LIBS/PLATFORM_LIBGCC with relative path. Signed-off-by: Masahiro Yamada Acked-by: Tom Rini Acked-by: Simon Glass Tested-by: Simon Glass --- arch/arm/config.mk | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 17b7408..1db80be 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -67,13 +67,8 @@ ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) # times. Also, the prefix needs to be different based on whether # CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry # before adding the correct one. -ifdef CONFIG_SPL_BUILD -PLATFORM_LIBS := $(SPLTREE)/arch/arm/lib/eabi_compat.o \ - $(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) -else -PLATFORM_LIBS := $(OBJTREE)/arch/arm/lib/eabi_compat.o \ - $(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) -endif +PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \ + $(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) endif # needed for relocation -- cgit v1.1 From 9b6e2c363f2686d6f7bf61fbe58b7591b71d3e8b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 28 Feb 2014 14:33:30 +0900 Subject: kbuild: fix CROSS_COMPILE settings in config.mk The syntax CROSS_COMIPLE ?= does not work because config.mk is parsed after exporting CROSS_COMPILE. Like Linux Kernel's arch/$(ARCH)/Makefile, we must write as follows: ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := endif Signed-off-by: Masahiro Yamada --- arch/arm/config.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 1db80be..792cb43 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -5,7 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -CROSS_COMPILE ?= arm-linux- +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := arm-linux- +endif ifndef CONFIG_STANDALONE_LOAD_ADDR ifneq ($(CONFIG_OMAP_COMMON),) -- cgit v1.1 From 50899183c933e31b1a43de1c4cc7a9085a417d96 Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:26 +0530 Subject: mtd: nand: omap: remove redundant platform specific header: arch-xx/omap_gpmc.h Currently there are two sets of omap_gpmc.h header files (a) arch/arm/include/asm/omap_gpmc.h common header file for all platforms, containing defines and declarations used by GPMC NAND driver. (b) arch/arm/include/asm/arch-xx/omap_gpmc.h SoC platform specific header file containing defines like ECC layout. This patch removes platform specific arch-xx/omap_gpmc.c because: - GPMC hardware engine is common for all SoC platforms hence only (a) is enough - ECC layout is now defined in omap_nand.c driver itself based on ecc-scheme selected. Hence all ECC layout declarations in (b) are redundant. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 48 ---------------------------- arch/arm/include/asm/arch-omap3/mem.h | 10 ++++++ arch/arm/include/asm/arch-omap3/omap_gpmc.h | 36 --------------------- arch/arm/include/asm/omap_gpmc.h | 2 -- 4 files changed, 10 insertions(+), 86 deletions(-) delete mode 100644 arch/arm/include/asm/arch-am33xx/omap_gpmc.h delete mode 100644 arch/arm/include/asm/arch-omap3/omap_gpmc.h (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h deleted file mode 100644 index 00ad1d0..0000000 --- a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2004-2008 Texas Instruments, - * Rohit Choraria - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASM_ARCH_OMAP_GPMC_H -#define __ASM_ARCH_OMAP_GPMC_H - -/* These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines are based on AM33xx ELM */ -#define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\ - .eccbytes = 32,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ - 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ - 28, 29, 30, 31, 32, 33},\ - .oobfree = {\ - {.offset = 34,\ - .length = 30 } } \ -} - -#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\ - .eccbytes = 56,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ - 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ - 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ - 52, 53, 54, 55, 56, 57},\ - .oobfree = {\ - {.offset = 58,\ - .length = 6 } } \ -} - -#define GPMC_NAND_HW_BCH16_ECC_LAYOUT {\ - .eccbytes = 104,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ - 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ - 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ - 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ - 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ - 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ - 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ - 100, 101, 102, 103, 104, 105},\ - .oobfree = {\ - {.offset = 106,\ - .length = 8 } } \ -} -#endif /* __ASM_ARCH_OMAP_GPMC_H */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index bcc22c4..1804191 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -419,6 +419,16 @@ enum { #define NET_GPMC_CONFIG6 0x00000FCF #define NET_GPMC_CONFIG7 0x00000f6c +/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */ +#define NET_LAN9221_GPMC_CONFIG1 0x00001000 +#define NET_LAN9221_GPMC_CONFIG2 0x00060700 +#define NET_LAN9221_GPMC_CONFIG3 0x00020201 +#define NET_LAN9221_GPMC_CONFIG4 0x06000700 +#define NET_LAN9221_GPMC_CONFIG5 0x0006090A +#define NET_LAN9221_GPMC_CONFIG6 0x87030000 +#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c + + /* max number of GPMC Chip Selects */ #define GPMC_MAX_CS 8 /* max number of GPMC regs */ diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h deleted file mode 100644 index bf23219..0000000 --- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2004-2008 Texas Instruments, - * Rohit Choraria - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASM_ARCH_OMAP_GPMC_H -#define __ASM_ARCH_OMAP_GPMC_H - -/* - * These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines using the BCH library. - * The OOB layout was first defined by linx kernel in commit - * 0e618ef0a6a33cf7ef96c2c824402088dd8ef48c, we have to reuse it here cause - * we want to be compatible. - */ -#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\ - .eccbytes = 56,\ - .eccpos = {12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,\ - 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,\ - 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50,\ - 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63},\ - .oobfree = {\ - {.offset = 2,\ - .length = 10 } } \ -} - -/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */ -#define NET_LAN9221_GPMC_CONFIG1 0x00001000 -#define NET_LAN9221_GPMC_CONFIG2 0x00060700 -#define NET_LAN9221_GPMC_CONFIG3 0x00020201 -#define NET_LAN9221_GPMC_CONFIG4 0x06000700 -#define NET_LAN9221_GPMC_CONFIG5 0x0006090A -#define NET_LAN9221_GPMC_CONFIG6 0x87030000 -#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c - -#endif /* __ASM_ARCH_OMAP_GPMC_H */ diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index 6ce5e65..5250109 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -9,8 +9,6 @@ #ifndef __ASM_OMAP_GPMC_H #define __ASM_OMAP_GPMC_H -#include - #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1 -- cgit v1.1 From a7e36fc95fa2c915bb95e845c8945ca926575f5b Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:27 +0530 Subject: mtd: nand: omap: remove unused #defines from common omap_gpmc.h OMAP NAND driver can detect Page-size and OOB-size of NAND device from ONFI params or nand_id[] table. And based on that it defines ECC layout. This patch 1) removes following board configs used for defining NAND ECC layout - GPMC_NAND_ECC_LP_x16_LAYOUT (for large page x16 NAND) - GPMC_NAND_ECC_LP_x8_LAYOUT (for large page x8 NAND) - GPMC_NAND_ECC_SP_x16_LAYOUT (for small page x16 NAND) - GPMC_NAND_ECC_SP_x8_LAYOUT (for small page x8 NAND) 2) removes unused #defines in common omap_gpmc.h depending on above configs Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/omap_gpmc.h | 47 ---------------------------------------- 1 file changed, 47 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index 5250109..3caaed8 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -12,53 +12,6 @@ #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1 -/* Generic ECC Layouts */ -/* Large Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ - 9, 10, 11, 12},\ - .oobfree = {\ - {.offset = 13,\ - .length = 51 } } \ -} -#endif - -/* Large Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 12,\ - .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13},\ - .oobfree = {\ - {.offset = 14,\ - .length = 50 } } \ -} -#endif - -/* Small Page x8 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {1, 2, 3},\ - .oobfree = {\ - {.offset = 4,\ - .length = 12 } } \ -} -#endif - -/* Small Page x16 NAND device Layout */ -#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT -#define GPMC_NAND_HW_ECC_LAYOUT {\ - .eccbytes = 3,\ - .eccpos = {2, 3, 4},\ - .oobfree = {\ - {.offset = 5,\ - .length = 11 } } \ -} -#endif - enum omap_ecc { /* 1-bit ECC calculation by Software, Error detection by Software */ OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */ -- cgit v1.1 From 51d192c40daa2b58cfc96c772799d9c632df33e3 Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:28 +0530 Subject: mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers into common omap_gpmc.h Each SoC platform (AM33xx, OMAP3, OMAP4, OMAP5) has its own copy of GPMC related defines and declarations scattered in SoC platform specific header files like include/asm/arch-xx/cpu.h However, GPMC hardware remains same across all platforms thus this patch merges GPMC data scattered across different arch-xx specific header files into single header file include/asm/arch/omap_gpmc.h Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/arch-am33xx/cpu.h | 51 -------------------------- arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 + arch/arm/include/asm/arch-omap3/cpu.h | 54 +--------------------------- arch/arm/include/asm/arch-omap3/sys_proto.h | 1 + arch/arm/include/asm/arch-omap4/cpu.h | 45 ----------------------- arch/arm/include/asm/arch-omap4/sys_proto.h | 1 + arch/arm/include/asm/arch-omap5/cpu.h | 45 ----------------------- arch/arm/include/asm/arch-omap5/sys_proto.h | 1 + arch/arm/include/asm/omap_gpmc.h | 53 +++++++++++++++++++++++++++ 9 files changed, 58 insertions(+), 194 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 71bed4e..d9f0306 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -78,58 +78,7 @@ #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ -struct gpmc_cs { - u32 config1; /* 0x00 */ - u32 config2; /* 0x04 */ - u32 config3; /* 0x08 */ - u32 config4; /* 0x0C */ - u32 config5; /* 0x10 */ - u32 config6; /* 0x14 */ - u32 config7; /* 0x18 */ - u32 nand_cmd; /* 0x1C */ - u32 nand_adr; /* 0x20 */ - u32 nand_dat; /* 0x24 */ - u8 res[8]; /* blow up to 0x30 byte */ -}; - -struct bch_res_0_3 { - u32 bch_result_x[4]; -}; - -struct gpmc { - u8 res1[0x10]; - u32 sysconfig; /* 0x10 */ - u8 res2[0x4]; - u32 irqstatus; /* 0x18 */ - u32 irqenable; /* 0x1C */ - u8 res3[0x20]; - u32 timeout_control; /* 0x40 */ - u8 res4[0xC]; - u32 config; /* 0x50 */ - u32 status; /* 0x54 */ - u8 res5[0x8]; /* 0x58 */ - struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ - u8 res6[0x14]; /* 0x1E0 */ - u32 ecc_config; /* 0x1F4 */ - u32 ecc_control; /* 0x1F8 */ - u32 ecc_size_config; /* 0x1FC */ - u32 ecc1_result; /* 0x200 */ - u32 ecc2_result; /* 0x204 */ - u32 ecc3_result; /* 0x208 */ - u32 ecc4_result; /* 0x20C */ - u32 ecc5_result; /* 0x210 */ - u32 ecc6_result; /* 0x214 */ - u32 ecc7_result; /* 0x218 */ - u32 ecc8_result; /* 0x21C */ - u32 ecc9_result; /* 0x220 */ - u8 res7[12]; /* 0x224 */ - u32 testmomde_ctrl; /* 0x230 */ - u8 res8[12]; /* 0x234 */ - struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ -}; -/* Used for board specific gpmc initialization */ -extern struct gpmc *gpmc_cfg; #ifndef CONFIG_AM43XX /* Encapsulating core pll registers */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 2e5c356..f73e285 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -10,6 +10,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +#include #include #define BOARD_REV_ID 0x0 diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 61ec8f2..4d06ef8 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -77,59 +77,7 @@ struct ctrl_id { #define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0) #ifndef __KERNEL_STRICT_NAMES -#ifndef __ASSEMBLY__ -struct gpmc_cs { - u32 config1; /* 0x00 */ - u32 config2; /* 0x04 */ - u32 config3; /* 0x08 */ - u32 config4; /* 0x0C */ - u32 config5; /* 0x10 */ - u32 config6; /* 0x14 */ - u32 config7; /* 0x18 */ - u32 nand_cmd; /* 0x1C */ - u32 nand_adr; /* 0x20 */ - u32 nand_dat; /* 0x24 */ - u8 res[8]; /* blow up to 0x30 byte */ -}; - -struct bch_res_0_3 { - u32 bch_result_x[4]; -}; - -struct gpmc { - u8 res1[0x10]; - u32 sysconfig; /* 0x10 */ - u8 res2[0x4]; - u32 irqstatus; /* 0x18 */ - u32 irqenable; /* 0x1C */ - u8 res3[0x20]; - u32 timeout_control; /* 0x40 */ - u8 res4[0xC]; - u32 config; /* 0x50 */ - u32 status; /* 0x54 */ - u8 res5[0x8]; /* 0x58 */ - struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ - u8 res6[0x14]; /* 0x1E0 */ - u32 ecc_config; /* 0x1F4 */ - u32 ecc_control; /* 0x1F8 */ - u32 ecc_size_config; /* 0x1FC */ - u32 ecc1_result; /* 0x200 */ - u32 ecc2_result; /* 0x204 */ - u32 ecc3_result; /* 0x208 */ - u32 ecc4_result; /* 0x20C */ - u32 ecc5_result; /* 0x210 */ - u32 ecc6_result; /* 0x214 */ - u32 ecc7_result; /* 0x218 */ - u32 ecc8_result; /* 0x21C */ - u32 ecc9_result; /* 0x220 */ - u8 res7[0x1C]; /* fill up to 0x240 */ - struct bch_res_0_3 bch_result_0_3[7]; /* 0x240 */ -}; - -/* Used for board specific gpmc initialization */ -extern struct gpmc *gpmc_cfg; - -#else /* __ASSEMBLY__ */ +#ifdef __ASSEMBLY__ #define GPMC_CONFIG1 0x00 #define GPMC_CONFIG2 0x04 #define GPMC_CONFIG3 0x08 diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 43b54f7..83d7f11 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -7,6 +7,7 @@ */ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +#include typedef struct { u32 mtype; diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index 545d9d9..c21fb54 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -14,51 +14,6 @@ #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ -struct gpmc_cs { - u32 config1; /* 0x00 */ - u32 config2; /* 0x04 */ - u32 config3; /* 0x08 */ - u32 config4; /* 0x0C */ - u32 config5; /* 0x10 */ - u32 config6; /* 0x14 */ - u32 config7; /* 0x18 */ - u32 nand_cmd; /* 0x1C */ - u32 nand_adr; /* 0x20 */ - u32 nand_dat; /* 0x24 */ - u8 res[8]; /* blow up to 0x30 byte */ -}; - -struct gpmc { - u8 res1[0x10]; - u32 sysconfig; /* 0x10 */ - u8 res2[0x4]; - u32 irqstatus; /* 0x18 */ - u32 irqenable; /* 0x1C */ - u8 res3[0x20]; - u32 timeout_control; /* 0x40 */ - u8 res4[0xC]; - u32 config; /* 0x50 */ - u32 status; /* 0x54 */ - u8 res5[0x8]; /* 0x58 */ - struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ - u8 res6[0x14]; /* 0x1E0 */ - u32 ecc_config; /* 0x1F4 */ - u32 ecc_control; /* 0x1F8 */ - u32 ecc_size_config; /* 0x1FC */ - u32 ecc1_result; /* 0x200 */ - u32 ecc2_result; /* 0x204 */ - u32 ecc3_result; /* 0x208 */ - u32 ecc4_result; /* 0x20C */ - u32 ecc5_result; /* 0x210 */ - u32 ecc6_result; /* 0x214 */ - u32 ecc7_result; /* 0x218 */ - u32 ecc8_result; /* 0x21C */ - u32 ecc9_result; /* 0x220 */ -}; - -/* Used for board specific gpmc initialization */ -extern struct gpmc *gpmc_cfg; - struct gptimer { u32 tidr; /* 0x00 r */ u8 res[0xc]; diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index fc94725..ea8b72c 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -12,6 +12,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index fb5a568..5f1d745 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -16,51 +16,6 @@ #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ -struct gpmc_cs { - u32 config1; /* 0x00 */ - u32 config2; /* 0x04 */ - u32 config3; /* 0x08 */ - u32 config4; /* 0x0C */ - u32 config5; /* 0x10 */ - u32 config6; /* 0x14 */ - u32 config7; /* 0x18 */ - u32 nand_cmd; /* 0x1C */ - u32 nand_adr; /* 0x20 */ - u32 nand_dat; /* 0x24 */ - u8 res[8]; /* blow up to 0x30 byte */ -}; - -struct gpmc { - u8 res1[0x10]; - u32 sysconfig; /* 0x10 */ - u8 res2[0x4]; - u32 irqstatus; /* 0x18 */ - u32 irqenable; /* 0x1C */ - u8 res3[0x20]; - u32 timeout_control; /* 0x40 */ - u8 res4[0xC]; - u32 config; /* 0x50 */ - u32 status; /* 0x54 */ - u8 res5[0x8]; /* 0x58 */ - struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ - u8 res6[0x14]; /* 0x1E0 */ - u32 ecc_config; /* 0x1F4 */ - u32 ecc_control; /* 0x1F8 */ - u32 ecc_size_config; /* 0x1FC */ - u32 ecc1_result; /* 0x200 */ - u32 ecc2_result; /* 0x204 */ - u32 ecc3_result; /* 0x208 */ - u32 ecc4_result; /* 0x20C */ - u32 ecc5_result; /* 0x210 */ - u32 ecc6_result; /* 0x214 */ - u32 ecc7_result; /* 0x218 */ - u32 ecc8_result; /* 0x21C */ - u32 ecc9_result; /* 0x220 */ -}; - -/* Used for board specific gpmc initialization */ -extern struct gpmc *gpmc_cfg; - struct gptimer { u32 tidr; /* 0x00 r */ u8 res1[0xc]; diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 43011a4..4247473 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -12,6 +12,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index 3caaed8..22f6573 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -28,4 +28,57 @@ enum omap_ecc { OMAP_ECC_BCH8_CODE_HW, }; +struct gpmc_cs { + u32 config1; /* 0x00 */ + u32 config2; /* 0x04 */ + u32 config3; /* 0x08 */ + u32 config4; /* 0x0C */ + u32 config5; /* 0x10 */ + u32 config6; /* 0x14 */ + u32 config7; /* 0x18 */ + u32 nand_cmd; /* 0x1C */ + u32 nand_adr; /* 0x20 */ + u32 nand_dat; /* 0x24 */ + u8 res[8]; /* blow up to 0x30 byte */ +}; + +struct bch_res_0_3 { + u32 bch_result_x[4]; +}; + +struct gpmc { + u8 res1[0x10]; + u32 sysconfig; /* 0x10 */ + u8 res2[0x4]; + u32 irqstatus; /* 0x18 */ + u32 irqenable; /* 0x1C */ + u8 res3[0x20]; + u32 timeout_control; /* 0x40 */ + u8 res4[0xC]; + u32 config; /* 0x50 */ + u32 status; /* 0x54 */ + u8 res5[0x8]; /* 0x58 */ + struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ + u8 res6[0x14]; /* 0x1E0 */ + u32 ecc_config; /* 0x1F4 */ + u32 ecc_control; /* 0x1F8 */ + u32 ecc_size_config; /* 0x1FC */ + u32 ecc1_result; /* 0x200 */ + u32 ecc2_result; /* 0x204 */ + u32 ecc3_result; /* 0x208 */ + u32 ecc4_result; /* 0x20C */ + u32 ecc5_result; /* 0x210 */ + u32 ecc6_result; /* 0x214 */ + u32 ecc7_result; /* 0x218 */ + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ + u8 res7[12]; /* 0x224 */ + u32 testmomde_ctrl; /* 0x230 */ + u8 res8[12]; /* 0x234 */ + struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ +}; + +/* Used for board specific gpmc initialization */ +extern struct gpmc *gpmc_cfg; + #endif /* __ASM_OMAP_GPMC_H */ -- cgit v1.1 From 6aff05098864233caf9d24cb020e67b00ada4e3e Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:29 +0530 Subject: mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nand omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +- arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +- arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +- arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +- arch/arm/include/asm/omap_gpmc.h | 84 ---------------------------- 5 files changed, 4 insertions(+), 88 deletions(-) delete mode 100644 arch/arm/include/asm/omap_gpmc.h (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index f73e285..91ff2ad 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -10,7 +10,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#include +#include #include #define BOARD_REV_ID 0x0 diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 83d7f11..44fa66f 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -7,7 +7,7 @@ */ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#include +#include typedef struct { u32 mtype; diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index ea8b72c..b338a15 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 4247473..9e007c8 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h deleted file mode 100644 index 22f6573..0000000 --- a/arch/arm/include/asm/omap_gpmc.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * (C) Copyright 2004-2008 Texas Instruments, - * Rohit Choraria - * - * (C) Copyright 2013 Andreas Bießmann - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASM_OMAP_GPMC_H -#define __ASM_OMAP_GPMC_H - -#define GPMC_BUF_EMPTY 0 -#define GPMC_BUF_FULL 1 - -enum omap_ecc { - /* 1-bit ECC calculation by Software, Error detection by Software */ - OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */ - /* 1-bit ECC calculation by GPMC, Error detection by Software */ - /* ECC layout compatible to legacy ROMCODE. */ - OMAP_ECC_HAM1_CODE_HW, - /* 4-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, - /* 4-bit ECC calculation by GPMC, Error detection by ELM */ - OMAP_ECC_BCH4_CODE_HW, - /* 8-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, - /* 8-bit ECC calculation by GPMC, Error detection by ELM */ - OMAP_ECC_BCH8_CODE_HW, -}; - -struct gpmc_cs { - u32 config1; /* 0x00 */ - u32 config2; /* 0x04 */ - u32 config3; /* 0x08 */ - u32 config4; /* 0x0C */ - u32 config5; /* 0x10 */ - u32 config6; /* 0x14 */ - u32 config7; /* 0x18 */ - u32 nand_cmd; /* 0x1C */ - u32 nand_adr; /* 0x20 */ - u32 nand_dat; /* 0x24 */ - u8 res[8]; /* blow up to 0x30 byte */ -}; - -struct bch_res_0_3 { - u32 bch_result_x[4]; -}; - -struct gpmc { - u8 res1[0x10]; - u32 sysconfig; /* 0x10 */ - u8 res2[0x4]; - u32 irqstatus; /* 0x18 */ - u32 irqenable; /* 0x1C */ - u8 res3[0x20]; - u32 timeout_control; /* 0x40 */ - u8 res4[0xC]; - u32 config; /* 0x50 */ - u32 status; /* 0x54 */ - u8 res5[0x8]; /* 0x58 */ - struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ - u8 res6[0x14]; /* 0x1E0 */ - u32 ecc_config; /* 0x1F4 */ - u32 ecc_control; /* 0x1F8 */ - u32 ecc_size_config; /* 0x1FC */ - u32 ecc1_result; /* 0x200 */ - u32 ecc2_result; /* 0x204 */ - u32 ecc3_result; /* 0x208 */ - u32 ecc4_result; /* 0x20C */ - u32 ecc5_result; /* 0x210 */ - u32 ecc6_result; /* 0x214 */ - u32 ecc7_result; /* 0x218 */ - u32 ecc8_result; /* 0x21C */ - u32 ecc9_result; /* 0x220 */ - u8 res7[12]; /* 0x224 */ - u32 testmomde_ctrl; /* 0x230 */ - u8 res8[12]; /* 0x234 */ - struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ -}; - -/* Used for board specific gpmc initialization */ -extern struct gpmc *gpmc_cfg; - -#endif /* __ASM_OMAP_GPMC_H */ -- cgit v1.1 From 2eda892f00fbcf46143326f72e8ac5b472bd225a Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 22 Nov 2013 16:53:30 +0530 Subject: mtd: nand: omap: move omap_elm.h from arch/arm/include/asm to drivers/mtd/nand omap_elm.h is a generic header used by OMAP ELM driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta --- arch/arm/include/asm/omap_elm.h | 77 ----------------------------------------- 1 file changed, 77 deletions(-) delete mode 100644 arch/arm/include/asm/omap_elm.h (limited to 'arch/arm') diff --git a/arch/arm/include/asm/omap_elm.h b/arch/arm/include/asm/omap_elm.h deleted file mode 100644 index 45454ea..0000000 --- a/arch/arm/include/asm/omap_elm.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2010-2011 Texas Instruments, - * Mansoor Ahamed - * - * Derived from work done by Rohit Choraria for omap3 - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASM_ARCH_ELM_H -#define __ASM_ARCH_ELM_H -/* - * ELM Module Registers - */ - -/* ELM registers bit fields */ -#define ELM_SYSCONFIG_SOFTRESET_MASK (0x2) -#define ELM_SYSCONFIG_SOFTRESET (0x2) -#define ELM_SYSSTATUS_RESETDONE_MASK (0x1) -#define ELM_SYSSTATUS_RESETDONE (0x1) -#define ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK (0x3) -#define ELM_LOCATION_CONFIG_ECC_SIZE_MASK (0x7FF0000) -#define ELM_LOCATION_CONFIG_ECC_SIZE_POS (16) -#define ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID (0x00010000) -#define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100) -#define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F) - -#ifndef __ASSEMBLY__ - -enum bch_level { - BCH_4_BIT = 0, - BCH_8_BIT, - BCH_16_BIT -}; - - -/* BCH syndrome registers */ -struct syndrome { - u32 syndrome_fragment_x[7]; /* 0x400, 0x404.... 0x418 */ - u8 res1[36]; /* 0x41c */ -}; - -/* BCH error status & location register */ -struct location { - u32 location_status; /* 0x800 */ - u8 res1[124]; /* 0x804 */ - u32 error_location_x[16]; /* 0x880.... */ - u8 res2[64]; /* 0x8c0 */ -}; - -/* BCH ELM register map - do not try to allocate memmory for this structure. - * We have used plenty of reserved variables to fill the slots in the ELM - * register memory map. - * Directly initialize the struct pointer to ELM base address. - */ -struct elm { - u32 rev; /* 0x000 */ - u8 res1[12]; /* 0x004 */ - u32 sysconfig; /* 0x010 */ - u32 sysstatus; /* 0x014 */ - u32 irqstatus; /* 0x018 */ - u32 irqenable; /* 0x01c */ - u32 location_config; /* 0x020 */ - u8 res2[92]; /* 0x024 */ - u32 page_ctrl; /* 0x080 */ - u8 res3[892]; /* 0x084 */ - struct syndrome syndrome_fragments[8]; /* 0x400 */ - u8 res4[512]; /* 0x600 */ - struct location error_location[8]; /* 0x800 */ -}; - -int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, - u32 *error_locations); -int elm_config(enum bch_level level); -void elm_reset(void); -void elm_init(void); -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_ELM_H */ -- cgit v1.1 From cd7efc2a947b30a2047b248f66ddfa8b182fda64 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 3 Feb 2014 14:03:24 -0700 Subject: ARM: tegra: move CONFIG_TEGRAnn needs to use CONFIG_TEGRA* to conditionalize some definitions, since some modules moved between generations. Move the definition of CONFIG_TEGRAnn to a header that's included earlier, so that it's set by the time tegra.h needs to use it. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/include/asm/arch-tegra114/tegra.h | 2 ++ arch/arm/include/asm/arch-tegra124/tegra.h | 2 ++ arch/arm/include/asm/arch-tegra20/tegra.h | 2 ++ arch/arm/include/asm/arch-tegra30/tegra.h | 2 ++ 4 files changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h index 5d426b5..705ca57 100644 --- a/arch/arm/include/asm/arch-tegra114/tegra.h +++ b/arch/arm/include/asm/arch-tegra114/tegra.h @@ -17,6 +17,8 @@ #ifndef _TEGRA114_H_ #define _TEGRA114_H_ +#define CONFIG_TEGRA114 + #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */ #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ diff --git a/arch/arm/include/asm/arch-tegra124/tegra.h b/arch/arm/include/asm/arch-tegra124/tegra.h index db3d837..86ebd19 100644 --- a/arch/arm/include/asm/arch-tegra124/tegra.h +++ b/arch/arm/include/asm/arch-tegra124/tegra.h @@ -8,6 +8,8 @@ #ifndef _TEGRA124_H_ #define _TEGRA124_H_ +#define CONFIG_TEGRA124 + #define NV_PA_SDRAM_BASE 0x80000000 #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ #define NV_PA_MC_BASE 0x70019000 /* Mem Ctlr regs (MCB, etc.) */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index 18856ac..6a4b40e 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -8,6 +8,8 @@ #ifndef _TEGRA20_H_ #define _TEGRA20_H_ +#define CONFIG_TEGRA20 + #define NV_PA_SDRAM_BASE 0x00000000 #include diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index c02c5d8..4ad8b1c 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -17,6 +17,8 @@ #ifndef _TEGRA30_H_ #define _TEGRA30_H_ +#define CONFIG_TEGRA30 + #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T30 */ #include -- cgit v1.1 From f3026c16836b0bdc2b4a170f29005d834a748c5e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 3 Feb 2014 14:03:25 -0700 Subject: ARM: tegra: fix pmc_pwrgate_timer_mult register definition Register pmc_pwrgate_timer_mult has a different layout on Tegra114 and Tegra124. Reflect this in pmc.h. Also, simply write the whole of the register in start_cpu() rather than doing a read-modify-write; the register is simple enough that the code can easily construct the entire desired value. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/cpu/arm720t/tegra124/cpu.c | 4 ++-- arch/arm/include/asm/arch-tegra/pmc.h | 11 +++++++++++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c index c03aaf1..97f5928 100644 --- a/arch/arm/cpu/arm720t/tegra124/cpu.c +++ b/arch/arm/cpu/arm720t/tegra124/cpu.c @@ -252,8 +252,8 @@ void start_cpu(u32 reset_vector) tegra124_init_clocks(); /* Set power-gating timer multiplier */ - clrbits_le32(&pmc->pmc_pwrgate_timer_mult, TIMER_MULT_MASK); - setbits_le32(&pmc->pmc_pwrgate_timer_mult, MULT_8); + writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT), + &pmc->pmc_pwrgate_timer_mult); enable_cpu_power_rail(); enable_cpu_clocks(); diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h index 4c3264b..1dd3154 100644 --- a/arch/arm/include/asm/arch-tegra/pmc.h +++ b/arch/arm/include/asm/arch-tegra/pmc.h @@ -298,14 +298,25 @@ struct pmc_ctlr { #define PMC_XOFS_SHIFT 1 #define PMC_XOFS_MASK (0x3F << PMC_XOFS_SHIFT) +#if defined(CONFIG_TEGRA114) #define TIMER_MULT_SHIFT 0 #define TIMER_MULT_MASK (3 << TIMER_MULT_SHIFT) #define TIMER_MULT_CPU_SHIFT 2 #define TIMER_MULT_CPU_MASK (3 << TIMER_MULT_CPU_SHIFT) +#elif defined(CONFIG_TEGRA124) +#define TIMER_MULT_SHIFT 0 +#define TIMER_MULT_MASK (7 << TIMER_MULT_SHIFT) +#define TIMER_MULT_CPU_SHIFT 3 +#define TIMER_MULT_CPU_MASK (7 << TIMER_MULT_CPU_SHIFT) +#endif + #define MULT_1 0 #define MULT_2 1 #define MULT_4 2 #define MULT_8 3 +#if defined(CONFIG_TEGRA124) +#define MULT_16 4 +#endif #define AMAP_WRITE_SHIFT 20 #define AMAP_WRITE_ON (1 << AMAP_WRITE_SHIFT) -- cgit v1.1 From 87fb553b90ab191fd643afa64d0fafd266a808c5 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 3 Feb 2014 14:03:26 -0700 Subject: ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124 Tegra124 moved the CSITE block's base address. Fix U-Boot to use the correct address. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/include/asm/arch-tegra/tegra.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index 5fe19ae..d63af0e 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -34,7 +34,12 @@ #define NV_PA_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) #define NV_PA_EMC_BASE (NV_PA_APB_MISC_BASE + 0xF400) #define NV_PA_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) +#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \ + defined(CONFIG_TEGRA114) #define NV_PA_CSITE_BASE 0x70040000 +#else +#define NV_PA_CSITE_BASE 0x70800000 +#endif #define TEGRA_USB_ADDR_MASK 0xFFFFC000 #define NV_PA_SDRC_CS0 NV_PA_SDRAM_BASE -- cgit v1.1 From 716ff5ce1df460f75f32009b85e77962c993290c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 3 Feb 2014 14:03:27 -0700 Subject: ARM: tegra: simplify halt_avp() In order to completely halt the AVP processor, we should simply write FLOW_MODE_STOP without any extra options that allow wakeup. Amend the code to do this. I believe that enabling FIQ_1 and IRQ_1 allow the CPU to be awoken by interrupts. We don't want this; if later SW wishes to use the AVP, it should be reset and booted from scratch. Related, the bits that were previously IRQ_1 and FIQ_1 have a slightly different definition starting with Tegra114, so the values we're writing don't entirely make sense there anyway. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/cpu/arm720t/tegra-common/cpu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c index 2c5cd63..168f525 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.c +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c @@ -378,8 +378,7 @@ void clock_enable_coresight(int enable) void halt_avp(void) { for (;;) { - writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ - | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), - FLOW_CTLR_HALT_COP_EVENTS); + writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29), + FLOW_CTLR_HALT_COP_EVENTS); } } -- cgit v1.1 From cd2e46cb38d5aeada2b2c2f881cdc6baa672dc09 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 5 Mar 2014 16:59:38 +0900 Subject: kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC Before this commit, USE_PRIVATE_LIBGCC was defined in arch-specific config.mk and referenced in arch/$(ARCH)/lib/Makefile. We are not happy about parsing config.mk again and again. We have to keep the same behavior with a different way. By adding "CONFIG_" prefix, this macro appears in include/autoconf.mk, include/spl-autoconf.mk. (And treating USE_PRIVATE_LIBGCC as CONFIG macro is reasonable enough.) Tegra SoC family defined USE_PRIVATE_LIBGCC as "yes" in arch/arm/cpu/arm720t/tegra*/config.mk, whereas did not define it in arch/arm/cpu/armv7/tegra*/config.mk. It means Tegra enables PRIVATE_LIBGCC only for SPL. We can describe the same behavior by adding #ifdef CONFIG_SPL_BUILD # define CONFIG_USE_PRIVATE_LIBGCC #endif to include/configs/tegra-common.h. Signed-off-by: Masahiro Yamada Cc: Tom Warren Cc: Simon Glass Acked-by: Stephen Warren --- arch/arm/cpu/arm720t/tegra114/config.mk | 19 ------------------- arch/arm/cpu/arm720t/tegra124/config.mk | 7 ------- arch/arm/cpu/arm720t/tegra20/config.mk | 10 ---------- arch/arm/cpu/arm720t/tegra30/config.mk | 19 ------------------- arch/arm/lib/Makefile | 13 ++----------- 5 files changed, 2 insertions(+), 66 deletions(-) delete mode 100644 arch/arm/cpu/arm720t/tegra114/config.mk delete mode 100644 arch/arm/cpu/arm720t/tegra124/config.mk delete mode 100644 arch/arm/cpu/arm720t/tegra20/config.mk delete mode 100644 arch/arm/cpu/arm720t/tegra30/config.mk (limited to 'arch/arm') diff --git a/arch/arm/cpu/arm720t/tegra114/config.mk b/arch/arm/cpu/arm720t/tegra114/config.mk deleted file mode 100644 index 7947b50..0000000 --- a/arch/arm/cpu/arm720t/tegra114/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra124/config.mk b/arch/arm/cpu/arm720t/tegra124/config.mk deleted file mode 100644 index 5e10701..0000000 --- a/arch/arm/cpu/arm720t/tegra124/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2010-2013 -# NVIDIA Corporation -# -# SPDX-License-Identifier: GPL-2.0+ -#/ -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra20/config.mk b/arch/arm/cpu/arm720t/tegra20/config.mk deleted file mode 100644 index e073345..0000000 --- a/arch/arm/cpu/arm720t/tegra20/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2010,2011 -# NVIDIA Corporation -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# -# SPDX-License-Identifier: GPL-2.0+ -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra30/config.mk b/arch/arm/cpu/arm720t/tegra30/config.mk deleted file mode 100644 index 2388c56..0000000 --- a/arch/arm/cpu/arm720t/tegra30/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 45febcf..9fc81cd 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -5,17 +5,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -# Build private libgcc only when asked for -ifdef USE_PRIVATE_LIBGCC -lib-y += _ashldi3.o -lib-y += _ashrdi3.o -lib-y += _divsi3.o -lib-y += _lshrdi3.o -lib-y += _modsi3.o -lib-y += _udivsi3.o -lib-y += _umodsi3.o -lib-y += div0.o -endif +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \ + _lshrdi3.o _modsi3.o _udivsi3.o _umodsi3.o div0.o ifdef CONFIG_ARM64 obj-y += crt0_64.o -- cgit v1.1 From 388b2e520b07cc857c03a152fc6006763f78b9d6 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 5 Mar 2014 17:49:22 +0900 Subject: kbuild: move "checkthumb" to ARM archprepare "checkthumb" makes sense only for ARM architecture. Move it to arch/arm/config.mk. To make sure gcc supports THUMB mode before beginning build, run "checkthumb" during "archprepare". Signed-off-by: Masahiro Yamada --- arch/arm/config.mk | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 792cb43..f4c2d81 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -41,7 +41,17 @@ endif # Only test once ifneq ($(CONFIG_SPL_BUILD),y) -ALL-$(CONFIG_SYS_THUMB_BUILD) += checkthumb +ifeq ($(CONFIG_SYS_THUMB_BUILD),y) +archprepare: checkthumb + +checkthumb: + @if test "$(call cc-version)" -lt "0404"; then \ + echo -n '*** Your GCC does not produce working '; \ + echo 'binaries in THUMB mode.'; \ + echo '*** Your board is configured for THUMB mode.'; \ + false; \ + fi +endif endif # Try if EABI is supported, else fall back to old API, -- cgit v1.1 From 81724e09a018cf002be1bbb1a89b4b25e5b6f5c4 Mon Sep 17 00:00:00 2001 From: Andreas Henriksson Date: Mon, 27 Jan 2014 19:18:59 +0100 Subject: at91sam9263ek: add mmc support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for using the Atmel MCI driver on at91sam9263ek. This change is modeled after the existing at91sam9260ek support. Please note that this hooks up slot1 (MCI1) for SD. Not both. Tested with at91bootstrap and u-boot on dataflash in slot 0 and fat-formatted 8GB SDHC in slot 1 on first revision at91sam9263ek (which must use dataflash in slot0 to boot). CONFIG_ATMEL_MCI_PORTB not tested. Signed-off-by: Andreas Henriksson [remove empty line] Signed-off-by: Andreas Bießmann --- arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 25 +++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c index 99a3913..6b51d5f 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c @@ -143,6 +143,31 @@ void at91_spi1_hw_init(unsigned long cs_mask) } #endif +#if defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI1, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */ + +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* MCI1_CDB */ + at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* MCI1_DB0 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, PUP); /* MCI1_DB1 */ + at91_set_a_periph(AT91_PIO_PORTA, 24, PUP); /* MCI1_DB2 */ + at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* MCI1_DB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCI1_CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCI1_DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCI1_DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCI1_DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCI1_DA3 */ +#endif +} +#endif + #ifdef CONFIG_MACB void at91_macb_hw_init(void) { -- cgit v1.1 From 3ed7c4875d1c50a6515ac3653b84f2f51e96fd03 Mon Sep 17 00:00:00 2001 From: Andreas Henriksson Date: Thu, 30 Jan 2014 19:20:07 +0100 Subject: at91 gpio: fix typo in compatibility macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's called _pio_ in the version that was added to git. Apparently it got renamed without updating the macros before it was applied, c.f. http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-3-9-V3-add-a-new-AT91-GPIO-driver-td75922.html Signed-off-by: Andreas Henriksson Signed-off-by: Andreas Bießmann --- arch/arm/include/asm/arch-at91/gpio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-at91/gpio.h b/arch/arm/include/asm/arch-at91/gpio.h index ff6142b..7121388 100644 --- a/arch/arm/include/asm/arch-at91/gpio.h +++ b/arch/arm/include/asm/arch-at91/gpio.h @@ -214,7 +214,7 @@ static inline unsigned pin_to_mask(unsigned pin) /* The following macros are need for backward compatibility */ #define at91_set_GPIO_periph(x, y) \ - at91_set_gpio_periph((x - PIN_BASE) / 32,(x % 32), y) + at91_set_pio_periph((x - PIN_BASE) / 32,(x % 32), y) #define at91_set_A_periph(x, y) \ at91_set_a_periph((x - PIN_BASE) / 32,(x % 32), y) #define at91_set_B_periph(x, y) \ -- cgit v1.1 From 8a45b0ba87649b1bad459fb235a843f5588a8251 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 3 Mar 2014 14:47:15 +0800 Subject: arm: atmel: sama5d3: add spi spl boot support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add SPI SPL boot support for sama5d3xek board. Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- arch/arm/cpu/at91-common/spl.c | 2 ++ arch/arm/include/asm/arch-at91/spl.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 37c0cc4..2598e09 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -52,6 +52,8 @@ u32 spl_boot_device(void) { #ifdef CONFIG_SYS_USE_MMC return BOOT_DEVICE_MMC1; +#elif CONFIG_SYS_USE_SERIALFLASH + return BOOT_DEVICE_SPI; #endif return BOOT_DEVICE_NONE; } diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h index 68c5349..f4ced49 100644 --- a/arch/arm/include/asm/arch-at91/spl.h +++ b/arch/arm/include/asm/arch-at91/spl.h @@ -14,6 +14,8 @@ enum { BOOT_DEVICE_MMC1, BOOT_DEVICE_MMC2, BOOT_DEVICE_MMC2_2, +#elif CONFIG_SYS_USE_SERIALFLASH + BOOT_DEVICE_SPI, #endif }; -- cgit v1.1 From 27019e4a949fc3be2e895ac20839c4d4d119f902 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 3 Mar 2014 14:47:17 +0800 Subject: arm: atmel: sama5d3: add nand spl boot support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add NAND SPL boot support with hardware PMECC. Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- arch/arm/cpu/at91-common/spl.c | 2 ++ arch/arm/include/asm/arch-at91/spl.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 2598e09..7f4debb 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -52,6 +52,8 @@ u32 spl_boot_device(void) { #ifdef CONFIG_SYS_USE_MMC return BOOT_DEVICE_MMC1; +#elif CONFIG_SYS_USE_NANDFLASH + return BOOT_DEVICE_NAND; #elif CONFIG_SYS_USE_SERIALFLASH return BOOT_DEVICE_SPI; #endif diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h index f4ced49..d8a87da 100644 --- a/arch/arm/include/asm/arch-at91/spl.h +++ b/arch/arm/include/asm/arch-at91/spl.h @@ -14,6 +14,8 @@ enum { BOOT_DEVICE_MMC1, BOOT_DEVICE_MMC2, BOOT_DEVICE_MMC2_2, +#elif CONFIG_SYS_USE_NANDFLASH + BOOT_DEVICE_NAND, #elif CONFIG_SYS_USE_SERIALFLASH BOOT_DEVICE_SPI, #endif -- cgit v1.1 From c6f3d50b9bbe33541b3cd47a4f35efc4f4ae0fa7 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 7 Mar 2014 01:20:56 +0000 Subject: ahci-plat: Provide a weak scsi_init hook This allow the platform to register the platform ahci device. Signed-off-by: Ian Campbell --- arch/arm/lib/board.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index e9a7708..92e85c4 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -593,6 +594,11 @@ void board_init_r(gd_t *id, ulong dest_addr) mmc_initialize(gd->bd); #endif +#ifdef CONFIG_CMD_SCSI + puts("SCSI: "); + scsi_init(); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); -- cgit v1.1 From b8dfcdb7d3e3442ba9f5a593ecaac7d8bc5fa921 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:38 +0100 Subject: exynos4:pinmux:fdt: decode peripheral id This patch adds api to decode peripheral id based on interrupt number. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- arch/arm/cpu/armv7/exynos/pinmux.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 645c497..8d6e5c1 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -741,6 +741,21 @@ int exynos_pinmux_config(int peripheral, int flags) } #ifdef CONFIG_OF_CONTROL +static int exynos4_pinmux_decode_periph_id(const void *blob, int node) +{ + int err; + u32 cell[3]; + + err = fdtdec_get_int_array(blob, node, "interrupts", cell, + ARRAY_SIZE(cell)); + if (err) { + debug(" invalid peripheral id\n"); + return PERIPH_ID_NONE; + } + + return cell[1]; +} + static int exynos5_pinmux_decode_periph_id(const void *blob, int node) { int err; @@ -758,6 +773,8 @@ int pinmux_decode_periph_id(const void *blob, int node) { if (cpu_is_exynos5()) return exynos5_pinmux_decode_periph_id(blob, node); + else if (cpu_is_exynos4()) + return exynos4_pinmux_decode_periph_id(blob, node); else return PERIPH_ID_NONE; } -- cgit v1.1 From de461c526ee7a489710d2c431acdb4d7fa677577 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:39 +0100 Subject: video:mipidsim:fdt: Add DT support for mipi dsim driver This patch enables parsing mipi data from device tree. Non device tree case is still supported. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- arch/arm/include/asm/arch-exynos/mipi_dsim.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 40aca71..50e5c25 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -12,6 +12,7 @@ #include #include +#include #define PANEL_NAME_SIZE (32) @@ -368,8 +369,12 @@ int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev); void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd); +void exynos_init_dsim_platform_data(vidinfo_t *vid); /* panel driver init based on mipi dsi interface */ void s6e8ax0_init(void); +#ifdef CONFIG_OF_CONTROL +extern int mipi_power(void); +#endif #endif /* _DSIM_H */ -- cgit v1.1 From 3577fe8be9dc8c8aa027361d6424efba9f97f553 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:41 +0100 Subject: drivers:mmc:sdhci: enable support for DT This patch enables support for device tree for sdhci driver. Non DT case is still supported. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- arch/arm/include/asm/arch-exynos/mmc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h index 98d6530..0fb6461 100644 --- a/arch/arm/include/asm/arch-exynos/mmc.h +++ b/arch/arm/include/asm/arch-exynos/mmc.h @@ -53,6 +53,8 @@ #define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) #define SDHCI_CTRL4_DRIVE_SHIFT (16) +#define SDHCI_MAX_HOSTS 4 + int s5p_sdhci_init(u32 regbase, int index, int bus_width); static inline int s5p_mmc_init(int index, int bus_width) @@ -62,4 +64,9 @@ static inline int s5p_mmc_init(int index, int bus_width) return s5p_sdhci_init(base, index, bus_width); } + +#ifdef CONFIG_OF_CONTROL +int exynos_mmc_init(const void *blob); +#endif + #endif -- cgit v1.1 From 8e5e1e6a92acfa465d993ab099ca1c54c4cadc8d Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:43 +0100 Subject: arm:exynos: add common DTS file for exynos 4 This patch adds common dtsi file and config header for all Exynos 4 based boards. Patch additionaly adds board specific (weak) functions for board_early_init_f and board_power_init functions. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- arch/arm/dts/exynos4.dtsi | 138 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/board.h | 12 +++ 2 files changed, 150 insertions(+) create mode 100644 arch/arm/dts/exynos4.dtsi (limited to 'arch/arm') diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi new file mode 100644 index 0000000..71dc7eb --- /dev/null +++ b/arch/arm/dts/exynos4.dtsi @@ -0,0 +1,138 @@ +/* + * Samsung's Exynos4 SoC common device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x3c>; + id = <0>; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x3c>; + id = <1>; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x3c>; + id = <2>; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x3c>; + id = <3>; + }; + + serial@13840000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13840000 0x3c>; + id = <4>; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <0 0 0>; + }; + + i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <1 1 0>; + }; + + i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <2 2 0>; + }; + + i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <3 3 0>; + }; + + i2c@138a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <4 4 0>; + }; + + i2c@138b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <5 5 0>; + }; + + i2c@138c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <6 6 0>; + }; + + i2c@138d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + interrupts = <7 7 0>; + }; + + sdhci@12510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-mmc"; + reg = <0x12510000 0x1000>; + interrupts = <0 75 0>; + }; + + sdhci@12520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-mmc"; + reg = <0x12520000 0x1000>; + interrupts = <0 76 0>; + }; + + sdhci@12530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-mmc"; + reg = <0x12530000 0x1000>; + interrupts = <0 77 0>; + }; + + sdhci@12540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-mmc"; + reg = <0x12540000 0x1000>; + interrupts = <0 78 0>; + }; + + gpio: gpio { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/include/asm/arch-exynos/board.h b/arch/arm/include/asm/arch-exynos/board.h index 243fb12..1b1cd0d 100644 --- a/arch/arm/include/asm/arch-exynos/board.h +++ b/arch/arm/include/asm/arch-exynos/board.h @@ -14,4 +14,16 @@ */ int exynos_init(void); +/* + * Exynos board specific changes for + * board_early_init_f + */ +int exynos_early_init_f(void); + +/* + * Exynos board specific changes for + * board_power_init + */ +int exynos_power_init(void); + #endif /* EXYNOS_BOARD_H */ -- cgit v1.1 From bf7716d6a35aceb5cc92330aeed31594aea06d59 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:46 +0100 Subject: board:origen: Enable device tree on Origen This patch enables to run Origen board on device tree. Uart, DRAM and MMC init functions are removed as their generic replacements form the common board file are used. The config file is modified to contain only board specific options. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Cc: Chander Kashyap Signed-off-by: Minkyu Kang --- arch/arm/dts/Makefile | 2 ++ arch/arm/dts/exynos4210-origen.dts | 45 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100644 arch/arm/dts/exynos4210-origen.dts (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2fcca5..dad03cf 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,3 +1,5 @@ +dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb + dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ exynos5250-smdk5250.dtb \ diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts new file mode 100644 index 0000000..5c9d2ae --- /dev/null +++ b/arch/arm/dts/exynos4210-origen.dts @@ -0,0 +1,45 @@ +/* + * Samsung's Exynos4210 based Origen board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "skeleton.dtsi" +/include/ "exynos4.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4210"; + compatible = "insignal,origen", "samsung,exynos4210"; + + chosen { + bootargs =""; + }; + + aliases { + serial0 = "/serial@13800000"; + console = "/serial@13820000"; + mmc2 = "sdhci@12530000"; + }; + + sdhci@12510000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12530000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpio 0x2008002 0>; + }; + + sdhci@12540000 { + status = "disabled"; + }; +}; \ No newline at end of file -- cgit v1.1 From 3f41ffe4b5b544acaa43aca52ea22a0ce76680b5 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:47 +0100 Subject: board:universal: Enable device tree on Universal This patch enables to run Universal board on device tree. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Acked-by: Przemyslaw Marczak Signed-off-by: Minkyu Kang --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos4210-universal_c210.dts | 83 ++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos4210-universal_c210.dts (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dad03cf..488aec2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,4 +1,5 @@ -dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb +dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ + exynos4210-universal_c210.dtb dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts new file mode 100644 index 0000000..1cdd981 --- /dev/null +++ b/arch/arm/dts/exynos4210-universal_c210.dts @@ -0,0 +1,83 @@ +/* + * Samsung's Exynos4210 based Universal C210 board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos4.dtsi" + +/ { + model = "Samsung Universal C210 based on Exynos4210 rev0"; + compatible = "samsung,universal_c210", "samsung,exynos4210"; + + aliases { + serial0 = "/serial@13800000"; + console = "/serial@13820000"; + mmc0 = "sdhci@12510000"; + mmc2 = "sdhci@12530000"; + }; + + sdhci@12510000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + pwr-gpios = <&gpio 0x2008002 0>; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12530000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpio 0x20c6004 0>; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + fimd@11c00000 { + compatible = "samsung,exynos-fimd"; + reg = <0x11c00000 0xa4>; + + samsung,vl-freq = <60>; + samsung,vl-col = <480>; + samsung,vl-row = <800>; + samsung,vl-width = <480>; + samsung,vl-height = <800>; + + samsung,vl-clkp = <0>; + samsung,vl-oep = <0>; + samsung,vl-hsp = <1>; + samsung,vl-vsp = <1>; + samsung,vl-dp = <1>; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <2>; + samsung,vl-hbpd = <16>; + samsung,vl-hfpd = <16>; + samsung,vl-vspw = <2>; + samsung,vl-vbpd = <8>; + samsung,vl-vfpd = <8>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,pclk_name = <1>; + samsung,sclk_div = <1>; + + samsung,winid = <0>; + samsung,power-on-delay = <10000>; + samsung,interface-mode = <1>; + samsung,mipi-enabled = <0>; + samsung,dp-enabled; + samsung,dual-lcd-enabled; + + samsung,logo-on = <1>; + samsung,resolution = <0>; + samsung,rgb-mode = <0>; + }; +}; -- cgit v1.1 From fe60164792e56aba74a2c4b8170612806a50f552 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:48 +0100 Subject: board:trats: Enable device tree on Trats This patch enables to run Trats board on device tree. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park CC: Lukasz Majewski Signed-off-by: Minkyu Kang --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos4210-trats.dts | 120 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos4210-trats.dts (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 488aec2..a853ec6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ - exynos4210-universal_c210.dtb + exynos4210-universal_c210.dtb \ + exynos4210-trats.dtb dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts new file mode 100644 index 0000000..992e023 --- /dev/null +++ b/arch/arm/dts/exynos4210-trats.dts @@ -0,0 +1,120 @@ +/* + * Samsung's Exynos4210 based Trats board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos4.dtsi" + +/ { + model = "Samsung Trats based on Exynos4210"; + compatible = "samsung,trats", "samsung,exynos4210"; + + config { + samsung,dsim-device-name = "s6e8ax0"; + }; + + aliases { + i2c0 = "/i2c@13860000"; + i2c1 = "/i2c@13870000"; + i2c2 = "/i2c@13880000"; + i2c3 = "/i2c@13890000"; + i2c4 = "/i2c@138a0000"; + i2c5 = "/i2c@138b0000"; + i2c6 = "/i2c@138c0000"; + i2c7 = "/i2c@138d0000"; + serial0 = "/serial@13800000"; + console = "/serial@13820000"; + mmc0 = "sdhci@12510000"; + mmc2 = "sdhci@12530000"; + }; + + fimd@11c00000 { + compatible = "samsung,exynos-fimd"; + reg = <0x11c00000 0xa4>; + + samsung,vl-freq = <60>; + samsung,vl-col = <720>; + samsung,vl-row = <1280>; + samsung,vl-width = <720>; + samsung,vl-height = <1280>; + + samsung,vl-clkp = <0>; + samsung,vl-oep = <0>; + samsung,vl-hsp = <1>; + samsung,vl-vsp = <1>; + samsung,vl-dp = <1>; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <5>; + samsung,vl-hbpd = <10>; + samsung,vl-hfpd = <10>; + samsung,vl-vspw = <2>; + samsung,vl-vbpd = <1>; + samsung,vl-vfpd = <13>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,power-on-delay = <30>; + samsung,interface-mode = <1>; + samsung,mipi-enabled = <1>; + samsung,dp-enabled; + samsung,dual-lcd-enabled; + + samsung,logo-on = <1>; + samsung,resolution = <0>; + samsung,rgb-mode = <0>; + }; + + mipidsi@11c80000 { + compatible = "samsung,exynos-mipi-dsi"; + reg = <0x11c80000 0x5c>; + + samsung,dsim-config-e-interface = <1>; + samsung,dsim-config-e-virtual-ch = <0>; + samsung,dsim-config-e-pixel-format = <7>; + samsung,dsim-config-e-burst-mode = <1>; + samsung,dsim-config-e-no-data-lane = <3>; + samsung,dsim-config-e-byte-clk = <0>; + samsung,dsim-config-hfp = <1>; + + samsung,dsim-config-p = <3>; + samsung,dsim-config-m = <120>; + samsung,dsim-config-s = <1>; + + samsung,dsim-config-pll-stable-time = <500>; + samsung,dsim-config-esc-clk = <20000000>; + samsung,dsim-config-stop-holding-cnt = <0x7ff>; + samsung,dsim-config-bta-timeout = <0xff>; + samsung,dsim-config-rx-timeout = <0xffff>; + + samsung,dsim-device-id = <0xffffffff>; + samsung,dsim-device-bus-id = <0>; + + samsung,dsim-device-reverse-panel = <1>; + }; + + sdhci@12510000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + pwr-gpios = <&gpio 0x2008002 0>; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12530000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpio 0x20c6004 0>; + }; + + sdhci@12540000 { + status = "disabled"; + }; +}; \ No newline at end of file -- cgit v1.1 From 1ecab0f30f9051821fdb5ec1c689b7c531b4feda Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Fri, 7 Mar 2014 14:59:49 +0100 Subject: board:trats2: Enable device tree on Trats2 This patch enables to run Trats2 board on device tree. Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos4412-trats2.dts | 434 +++++++++++++++++++++++++++++++++++++ 2 files changed, 436 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos4412-trats2.dts (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a853ec6..631a9be 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ exynos4210-universal_c210.dtb \ - exynos4210-trats.dtb + exynos4210-trats.dtb \ + exynos4412-trats2.dtb dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts new file mode 100644 index 0000000..7d32067 --- /dev/null +++ b/arch/arm/dts/exynos4412-trats2.dts @@ -0,0 +1,434 @@ +/* + * Samsung's Exynos4412 based Trats2 board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos4.dtsi" + +/ { + model = "Samsung Trats2 based on Exynos4412"; + compatible = "samsung,trats2", "samsung,exynos4412"; + + config { + samsung,dsim-device-name = "s6e8ax0"; + }; + + aliases { + i2c0 = "/i2c@13860000"; + i2c1 = "/i2c@13870000"; + i2c2 = "/i2c@13880000"; + i2c3 = "/i2c@13890000"; + i2c4 = "/i2c@138a0000"; + i2c5 = "/i2c@138b0000"; + i2c6 = "/i2c@138c0000"; + i2c7 = "/i2c@138d0000"; + serial0 = "/serial@13800000"; + console = "/serial@13820000"; + mmc0 = "sdhci@12510000"; + mmc2 = "sdhci@12530000"; + }; + + i2c@138d0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + max77686_pmic@09 { + compatible = "maxim,max77686_pmic"; + interrupts = <7 0>; + reg = <0x09 0 0>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-off; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-mem-idle; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-idle; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-mem-off; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-mem-off; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-mem-off; + }; + }; + }; + }; + + fimd@11c00000 { + compatible = "samsung,exynos-fimd"; + reg = <0x11c00000 0xa4>; + + samsung,vl-freq = <60>; + samsung,vl-col = <720>; + samsung,vl-row = <1280>; + samsung,vl-width = <720>; + samsung,vl-height = <1280>; + + samsung,vl-clkp = <0>; + samsung,vl-oep = <0>; + samsung,vl-hsp = <1>; + samsung,vl-vsp = <1>; + samsung,vl-dp = <1>; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <5>; + samsung,vl-hbpd = <10>; + samsung,vl-hfpd = <10>; + samsung,vl-vspw = <2>; + samsung,vl-vbpd = <1>; + samsung,vl-vfpd = <13>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <0>; + samsung,power-on-delay = <30>; + samsung,interface-mode = <1>; + samsung,mipi-enabled = <1>; + samsung,dp-enabled; + samsung,dual-lcd-enabled; + + samsung,logo-on = <1>; + samsung,resolution = <0>; + samsung,rgb-mode = <0>; + }; + + mipidsi@11c80000 { + compatible = "samsung,exynos-mipi-dsi"; + reg = <0x11c80000 0x5c>; + + samsung,dsim-config-e-interface = <1>; + samsung,dsim-config-e-virtual-ch = <0>; + samsung,dsim-config-e-pixel-format = <7>; + samsung,dsim-config-e-burst-mode = <1>; + samsung,dsim-config-e-no-data-lane = <3>; + samsung,dsim-config-e-byte-clk = <0>; + samsung,dsim-config-hfp = <1>; + + samsung,dsim-config-p = <3>; + samsung,dsim-config-m = <120>; + samsung,dsim-config-s = <1>; + + samsung,dsim-config-pll-stable-time = <500>; + samsung,dsim-config-esc-clk = <20000000>; + samsung,dsim-config-stop-holding-cnt = <0x7ff>; + samsung,dsim-config-bta-timeout = <0xff>; + samsung,dsim-config-rx-timeout = <0xffff>; + + samsung,dsim-device-id = <0xffffffff>; + samsung,dsim-device-bus-id = <0>; + + samsung,dsim-device-reverse-panel = <1>; + }; + + sdhci@12510000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + pwr-gpios = <&gpio 0x2004002 0>; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12530000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpio 0x20C6004 0>; + }; + + sdhci@12540000 { + status = "disabled"; + }; +}; -- cgit v1.1 From d73f38f7ba4d8a6309b4c35830e46935c4cd6a55 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 5 Mar 2014 14:57:47 -0500 Subject: am33xx: Rework #ifdef's around s_init for clarity The s_init function is only called on SPL or XIP cases, so lets only build it for them. This makes the #if logic within the function a bit clearer as to when we are or are not calling things, and makes it easier to see that for example preloader_console_init isn't ever called in the non-XIP full U-Boot case. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 2b15a64..fb44cc8 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -202,6 +202,7 @@ static void watchdog_disable(void) } #endif +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) void s_init(void) { /* @@ -220,22 +221,19 @@ void s_init(void) #ifdef CONFIG_SPL_BUILD save_omap_boot_params(); #endif -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) watchdog_disable(); timer_init(); set_uart_mux_conf(); setup_clocks_for_console(); uart_soft_reset(); -#endif #ifdef CONFIG_NOR_BOOT gd->baudrate = CONFIG_BAUDRATE; serial_init(); gd->have_console = 1; -#else +#elif defined(CONFIG_SPL_BUILD) gd = &gdata; preloader_console_init(); #endif -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) prcm_init(); set_mux_conf_regs(); #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) @@ -243,8 +241,8 @@ void s_init(void) rtc32k_enable(); #endif sdram_init(); -#endif } +#endif #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) -- cgit v1.1 From 07e27ce013ddb28c5c0725d65b1aa28fd95fcd87 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 11 Mar 2014 11:05:11 +0900 Subject: kbuild,mxs: use short logs for MXS images Signed-off-by: Masahiro Yamada Cc: Fabio Estevam Cc: Otavio Salvador Cc: Lauri Hintsala Acked-by: Marek Vasut --- arch/arm/cpu/arm926ejs/mxs/Makefile | 13 +++++++------ arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 4 ++-- arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 4 ++-- arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 ++-- arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 ++-- 5 files changed, 15 insertions(+), 14 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 152546e..1eee661 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -14,11 +14,12 @@ obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o endif # Specify the target for use in elftosb call -MKIMAGE_TARGET-$(CONFIG_MX23) = mx23 -MKIMAGE_TARGET-$(CONFIG_MX28) = mx28 +MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage.mx23.cfg +MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage.mx28.cfg -$(OBJTREE)/mxsimage.cfg: $(SRCTREE)/$(CPUDIR)/$(SOC)/mxsimage.$(MKIMAGE_TARGET-y).cfg - sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@ +quiet_cmd_mkimage_mxs = UIMAGE $@ +cmd_mkimage_mxs = $(objtree)/tools/mkimage -n $< -T mxsimage $@ \ + $(if $(KBUILD_VERBOSE:1=), >/dev/null) -$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/mxsimage.cfg - $(OBJTREE)/tools/mkimage -n $(OBJTREE)/mxsimage.cfg -T mxsimage $@ +u-boot.sb: $(src)/$(MKIMAGE_TARGET-y) u-boot.bin spl/u-boot-spl.bin FORCE + $(call if_changed,mkimage_mxs) diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg index c9cf4b3..8118767 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg @@ -1,6 +1,6 @@ SECTION 0x0 BOOTABLE TAG LAST - LOAD 0x0 OBJTREE/spl/u-boot-spl.bin + LOAD 0x0 spl/u-boot-spl.bin CALL 0x14 0x0 - LOAD 0x40000100 OBJTREE/u-boot.bin + LOAD 0x40000100 u-boot.bin CALL 0x40000100 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg index 676f5c8..ea772f0 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg @@ -1,8 +1,8 @@ SECTION 0x0 BOOTABLE TAG LAST - LOAD 0x0 OBJTREE/spl/u-boot-spl.bin + LOAD 0x0 spl/u-boot-spl.bin LOAD IVT 0x8000 0x14 CALL HAB 0x8000 0x0 - LOAD 0x40000100 OBJTREE/u-boot.bin + LOAD 0x40000100 u-boot.bin LOAD IVT 0x8000 0x40000100 CALL HAB 0x8000 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd index 8b6c30e..3a51879 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd @@ -4,8 +4,8 @@ options { } sources { - u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; - u_boot="OBJTREE/u-boot.bin"; + u_boot_spl="spl/u-boot-spl.bin"; + u_boot="u-boot.bin"; } section (0) { diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd index a5fa648..c60615a 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd @@ -1,6 +1,6 @@ sources { - u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; - u_boot="OBJTREE/u-boot.bin"; + u_boot_spl="spl/u-boot-spl.bin"; + u_boot="u-boot.bin"; } section (0) { -- cgit v1.1 From 4ab3fc5eba1d24f37ab33f83ea39c1f7082075d3 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 11 Mar 2014 11:05:17 +0900 Subject: kirkwood: kwbimage: refactor CONFIG_SYS_KWD_CONFIG Pull out "$(SRCTREE)/" from CONFIG_SYS_KWD_CONFIG and push it into the top Makefile. Signed-off-by: Masahiro Yamada Cc: Michael Walle Cc: Simon Guinot Cc: Dave Purdy Cc: Stefan Herbrechtsmeier Cc: Luka Perkov Cc: Valentin Longchamp Cc: Jason Cooper Cc: Siddarth Gore Cc: Prafulla Wadaskar Cc: Eric Cooper Cc: Suriyan Ramasami --- arch/arm/include/asm/arch-kirkwood/config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h index 197703b..7a688e4 100644 --- a/arch/arm/include/asm/arch-kirkwood/config.h +++ b/arch/arm/include/asm/arch-kirkwood/config.h @@ -38,7 +38,7 @@ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file */ #ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg #endif /* CONFIG_SYS_KWD_CONFIG */ /* Kirkwood has 2k of Security SRAM, use it for SP */ -- cgit v1.1 From 47c9c76b8afbcbe3d6e496dc2b0e4a72a488622a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 10 Mar 2014 20:04:31 +0100 Subject: arm: exynos: Squash bogus warnings in pinmux Squash these warnings in pinmux.c found with GCC 4.8: /arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config': /arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized] for (i = start; i < start + count; i++) { ^ /arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here int i, start, count; ^ /arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] for (i = start; i < start + count; i++) { ^ /arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here int i, start, count; ^ /arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized] s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); ^ /arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here struct s5p_gpio_bank *bank; ^ /arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config': /arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized] for (i = start; i < start + count; i++) { ^ /arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here int i, start, count; ^ /arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] for (i = start; i < start + count; i++) { ^ /arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here int i, start, count; ^ /arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized] s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); ^ /arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here struct s5p_gpio_bank *bank; ^ Note that the warning is bogus, the function can never be called with invalid 'peripheral' argument. GCC just cannot analyze this. Signed-off-by: Marek Vasut Cc: Naveen Krishna Chatradhi Cc: Akshay Saraswat Cc: Simon Glass Cc: Tom Rini Acked-by: Simon Glass Acked-by: Rajeshwari S Shinde Signed-off-by: Lukasz Majewski Signed-off-by: Minkyu Kang --- arch/arm/cpu/armv7/exynos/pinmux.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 8d6e5c1..9edb475 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -39,6 +39,9 @@ static void exynos5_uart_config(int peripheral) start = 4; count = 2; break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return; } for (i = start; i < start + count; i++) { s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); @@ -74,6 +77,9 @@ static void exynos5420_uart_config(int peripheral) start = 4; count = 2; break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return; } for (i = start; i < start + count; i++) { @@ -110,6 +116,9 @@ static int exynos5_mmc_config(int peripheral, int flags) bank = &gpio1->c4; bank_ext = NULL; break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; } if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { debug("SDMMC device %d does not support 8bit mode", @@ -683,6 +692,9 @@ static void exynos4_uart_config(int peripheral) start = 4; count = 2; break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return; } for (i = start; i < start + count; i++) { s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); -- cgit v1.1