From dee40d26d395e6f589d3c11af20c31a154d98d41 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 22 Jul 2015 18:26:13 +0200 Subject: arm: mvebu: Enable USB EHCI support on Armada XP This patch enables the USB EHCI support for the Marvell Armada XP (AXP) SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done this already in the bin_hdr (SPL U-Boot). Without this, accessing the controller registers in U-Boot or Linux will hang the CPU. Additionally, the AXP uses a different USB EHCI base address. This patch also takes care of this by runtime SoC detection in the Marvell EHCI driver. Signed-off-by: Stefan Roese Signed-off-by: Anton Schubert Cc: Marek Vasut Cc: Luka Perkov --- arch/arm/mach-mvebu/cpu.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch/arm/mach-mvebu/cpu.c') diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 38e15aa..1c5f4c3 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -179,6 +179,46 @@ static void set_cbar(u32 addr) asm("mcr p15, 4, %0, c15, c0" : : "r" (addr)); } +#define MV_USB_PHY_BASE (MVEBU_AXP_USB_BASE + 0x800) +#define MV_USB_PHY_PLL_REG(reg) (MV_USB_PHY_BASE | (((reg) & 0xF) << 2)) +#define MV_USB_X3_BASE(addr) (MVEBU_AXP_USB_BASE | BIT(11) | \ + (((addr) & 0xF) << 6)) +#define MV_USB_X3_PHY_CHANNEL(dev, reg) (MV_USB_X3_BASE((dev) + 1) | \ + (((reg) & 0xF) << 2)) + +static void setup_usb_phys(void) +{ + int dev; + + /* + * USB PLL init + */ + + /* Setup PLL frequency */ + /* USB REF frequency = 25 MHz */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(1), 0x3ff, 0x605); + + /* Power up PLL and PHY channel */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(2), 0, BIT(9)); + + /* Assert VCOCAL_START */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(1), 0, BIT(21)); + + mdelay(1); + + /* + * USB PHY init (change from defaults) specific for 40nm (78X30 78X60) + */ + + for (dev = 0; dev < 3; dev++) { + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 3), 0, BIT(15)); + + /* Assert REG_RCAL_START in channel REG 1 */ + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), 0, BIT(12)); + udelay(40); + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), BIT(12), 0); + } +} int arch_cpu_init(void) { @@ -246,6 +286,9 @@ int arch_cpu_init(void) clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0, GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN | NAND_PUP_EN | SPI_PUP_EN); + + /* Configure USB PLL and PHYs on AXP */ + setup_usb_phys(); } /* Enable NAND and NAND arbiter */ -- cgit v1.1