From 77b0e2239a13fa83a745ea9b03994bf780a9738a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 20 Sep 2013 01:36:44 +0200 Subject: ARM: mxs: Setup stack in JTAG mode In case the MX23/MX28 is switched into JTAG mode via the BootMode select switches, the BootROM bypasses the CPU core registers initialization. This in turn means that the Stack Pointer (SP) register is not set as it is in every other mode of operation, but instead is only zeroed out. To prevent U-Boot SPL from crashing in this obscure JTAG mode, configure the SP to point at the CONFIG_SYS_INIT_SP_ADDR if the SP is zeroed out. Note that in case the SP is already configured, we must preserve that exact SP value and must not modify it. This is important since in every other mode but the JTAG mode, the SPL returns into the BootROM and BootROM in turn loads U-Boot itself. If the SP were to be corrupted, the BootROM won't be able to continue it's operation after returned from SPL and the system would crash. Finally, add the JTAG mode switch identifier, so it's not recognised as Unknown mode. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Fabio Estevam Cc: Otavio Salvador --- arch/arm/include/asm/arch-mxs/sys_proto.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/include') diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 43c7dd6..09dfc90 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -46,6 +46,7 @@ static const struct mxs_pair mxs_boot_modes[] = { { 0x02, 0x1f, "SSP SPI #1, master, NOR" }, { 0x03, 0x1f, "SSP SPI #2, master, NOR" }, { 0x04, 0x1f, "NAND" }, + { 0x06, 0x1f, "JTAG" }, { 0x08, 0x1f, "SSP SPI #3, master, EEPROM" }, { 0x09, 0x1f, "SSP SD/MMC #0" }, { 0x0a, 0x1f, "SSP SD/MMC #1" }, @@ -60,6 +61,7 @@ static const struct mxs_pair mxs_boot_modes[] = { { 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" }, { 0x04, 0x1f, "NAND, 3V3" }, { 0x14, 0x1f, "NAND, 1V8" }, + { 0x06, 0x1f, "JTAG" }, { 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" }, { 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" }, { 0x09, 0x1f, "SSP SD/MMC #0, 3V3" }, -- cgit v1.1