From 20e18e051fc42774c27f07200a389edfd4606c67 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 21 Sep 2011 12:40:06 +0000 Subject: tegra2: Add more pinmux functions This adds support for changing pinmux functions of pin groups. This is done by defining a PMUX_FUNC_... enum which can be used to select the function for each group using pinmux_set_func(). It is also possible to enable pullup/pulldown, and the existing tristate functionality is retained. Also provided is a means of configuring a list of pingroups by providing a configuration table to pinmux_config_table(). Signed-off-by: Simon Glass Tested-by: Tom Warren --- arch/arm/include/asm/arch-tegra2/pinmux.h | 192 +++++++++++++++++++++++++++--- 1 file changed, 175 insertions(+), 17 deletions(-) (limited to 'arch/arm/include') diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra2/pinmux.h index e8ef632..469d742 100644 --- a/arch/arm/include/asm/arch-tegra2/pinmux.h +++ b/arch/arm/include/asm/arch-tegra2/pinmux.h @@ -24,7 +24,14 @@ #ifndef _PINMUX_H_ #define _PINMUX_H_ -/* Pin groups which we can set to tristate or normal */ +/* + * Pin groups which we adjust. There are three basic attributes of each pin + * group which use this enum: + * + * - function + * - pullup / pulldown + * - tristate or normal + */ enum pmux_pingrp { /* APB_MISC_PP_TRISTATE_REG_A_0 */ PINGRP_ATA, @@ -155,37 +162,169 @@ enum pmux_pingrp { PINGRP_UDA, PINGRP_CRTP, PINGRP_SDB, + + /* these pin groups only have pullup and pull down control */ + PINGRP_FIRST_NO_MUX, + PINGRP_CK32 = PINGRP_FIRST_NO_MUX, + PINGRP_DDRC, + PINGRP_PMCA, + PINGRP_PMCB, + PINGRP_PMCC, + PINGRP_PMCD, + PINGRP_PMCE, + PINGRP_XM2C, + PINGRP_XM2D, + + PINGRP_COUNT, +}; + +/* + * Functions which can be assigned to each of the pin groups. The values here + * bear no relation to the values programmed into pinmux registers and are + * purely a convenience. The translation is done through a table search. + */ +enum pmux_func { + PMUX_FUNC_AHB_CLK, + PMUX_FUNC_APB_CLK, + PMUX_FUNC_AUDIO_SYNC, + PMUX_FUNC_CRT, + PMUX_FUNC_DAP1, + PMUX_FUNC_DAP2, + PMUX_FUNC_DAP3, + PMUX_FUNC_DAP4, + PMUX_FUNC_DAP5, + PMUX_FUNC_DISPA, + PMUX_FUNC_DISPB, + PMUX_FUNC_EMC_TEST0_DLL, + PMUX_FUNC_EMC_TEST1_DLL, + PMUX_FUNC_GMI, + PMUX_FUNC_GMI_INT, + PMUX_FUNC_HDMI, + PMUX_FUNC_I2C, + PMUX_FUNC_I2C2, + PMUX_FUNC_I2C3, + PMUX_FUNC_IDE, + PMUX_FUNC_IRDA, + PMUX_FUNC_KBC, + PMUX_FUNC_MIO, + PMUX_FUNC_MIPI_HS, + PMUX_FUNC_NAND, + PMUX_FUNC_OSC, + PMUX_FUNC_OWR, + PMUX_FUNC_PCIE, + PMUX_FUNC_PLLA_OUT, + PMUX_FUNC_PLLC_OUT1, + PMUX_FUNC_PLLM_OUT1, + PMUX_FUNC_PLLP_OUT2, + PMUX_FUNC_PLLP_OUT3, + PMUX_FUNC_PLLP_OUT4, + PMUX_FUNC_PWM, + PMUX_FUNC_PWR_INTR, + PMUX_FUNC_PWR_ON, + PMUX_FUNC_RTCK, + PMUX_FUNC_SDIO1, + PMUX_FUNC_SDIO2, + PMUX_FUNC_SDIO3, + PMUX_FUNC_SDIO4, + PMUX_FUNC_SFLASH, + PMUX_FUNC_SPDIF, + PMUX_FUNC_SPI1, + PMUX_FUNC_SPI2, + PMUX_FUNC_SPI2_ALT, + PMUX_FUNC_SPI3, + PMUX_FUNC_SPI4, + PMUX_FUNC_TRACE, + PMUX_FUNC_TWC, + PMUX_FUNC_UARTA, + PMUX_FUNC_UARTB, + PMUX_FUNC_UARTC, + PMUX_FUNC_UARTD, + PMUX_FUNC_UARTE, + PMUX_FUNC_ULPI, + PMUX_FUNC_VI, + PMUX_FUNC_VI_SENSOR_CLK, + PMUX_FUNC_XIO, + PMUX_FUNC_SAFE, + + /* These don't have a name, but can be used in the table */ + PMUX_FUNC_RSVD1, + PMUX_FUNC_RSVD2, + PMUX_FUNC_RSVD3, + PMUX_FUNC_RSVD4, + PMUX_FUNC_RSVD, /* Not valid and should not be used */ + + PMUX_FUNC_COUNT, + + PMUX_FUNC_NONE = -1, }; +/* return 1 if a pmux_func is in range */ +#define pmux_func_isvalid(func) ((func) >= 0 && (func) < PMUX_FUNC_COUNT && \ + (func) != PMUX_FUNC_RSVD) + +/* The pullup/pulldown state of a pin group */ +enum pmux_pull { + PMUX_PULL_NORMAL = 0, + PMUX_PULL_DOWN, + PMUX_PULL_UP, +}; + +/* Defines whether a pin group is tristated or in normal operation */ +enum pmux_tristate { + PMUX_TRI_NORMAL = 0, + PMUX_TRI_TRISTATE = 1, +}; -#define TEGRA_TRISTATE_REGS 4 +/* Available power domains used by pin groups */ +enum pmux_vddio { + PMUX_VDDIO_BB = 0, + PMUX_VDDIO_LCD, + PMUX_VDDIO_VI, + PMUX_VDDIO_UART, + PMUX_VDDIO_DDR, + PMUX_VDDIO_NAND, + PMUX_VDDIO_SYS, + PMUX_VDDIO_AUDIO, + PMUX_VDDIO_SD, + + PMUX_VDDIO_NONE +}; + +enum { + PMUX_TRISTATE_REGS = 4, + PMUX_MUX_REGS = 7, + PMUX_PULL_REGS = 5, +}; /* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */ struct pmux_tri_ctlr { uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */ - uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */ + uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */ uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */ uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */ - uint pmt_tri[TEGRA_TRISTATE_REGS]; /* _TRI_STATE_REG_A/B/C/D_0 14-20 */ - uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */ + uint pmt_tri[PMUX_TRISTATE_REGS];/* _TRI_STATE_REG_A/B/C/D_0 14-20 */ + uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */ uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */ - uint pmt_ctl_a; /* _PINGRP_MUX_CTL_A_0, offset 80 */ - uint pmt_ctl_b; /* _PINGRP_MUX_CTL_B_0, offset 84 */ - uint pmt_ctl_c; /* _PINGRP_MUX_CTL_C_0, offset 88 */ - uint pmt_ctl_d; /* _PINGRP_MUX_CTL_D_0, offset 8C */ - uint pmt_ctl_e; /* _PINGRP_MUX_CTL_E_0, offset 90 */ - uint pmt_ctl_f; /* _PINGRP_MUX_CTL_F_0, offset 94 */ - uint pmt_ctl_g; /* _PINGRP_MUX_CTL_G_0, offset 98 */ + uint pmt_ctl[PMUX_MUX_REGS]; /* _PIN_MUX_CTL_A-G_0, offset 80 */ + uint pmt_reserved4; /* ABP_MISC_PP_ reserved offset 9c */ + uint pmt_pull[PMUX_PULL_REGS]; /* APB_MISC_PP_PULLUPDOWN_REG_A-E */ }; -/* Converts a pin group to a tristate register: 0=A, 1=B, 2=C, 3=D */ -#define TRISTATE_REG(id) ((id) >> 5) - -/* Mask value for a tristate (within TRISTATE_REG(id)) */ -#define TRISTATE_MASK(id) (1 << ((id) & 0x1f)) +/* + * This defines the configuration for a pin, including the function assigned, + * pull up/down settings and tristate settings. Having set up one of these + * you can call pinmux_config_pingroup() to configure a pin in one step. Also + * available is pinmux_config_table() to configure a list of pins. + */ +struct pingroup_config { + enum pmux_pingrp pingroup; /* pin group PINGRP_... */ + enum pmux_func func; /* function to assign FUNC_... */ + enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/ + enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */ +}; /* Set a pin group to tristate */ void pinmux_tristate_enable(enum pmux_pingrp pin); @@ -193,4 +332,23 @@ void pinmux_tristate_enable(enum pmux_pingrp pin); /* Set a pin group to normal (non tristate) */ void pinmux_tristate_disable(enum pmux_pingrp pin); +/* Set the pull up/down feature for a pin group */ +void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); + +/* Set the mux function for a pin group */ +void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); + +/* Set the complete configuration for a pin group */ +void pinmux_config_pingroup(struct pingroup_config *config); + +void pinmux_set_tristate(enum pmux_pingrp pin, int enable); + +/** + * Configuure a list of pin groups + * + * @param config List of config items + * @param len Number of config items in list + */ +void pinmux_config_table(struct pingroup_config *config, int len); + #endif /* PINMUX_H */ -- cgit v1.1