From dd227b6ea018e9cefc1a5a3b367e6cdec4bfb45e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Tue, 14 Aug 2012 05:19:12 +0000 Subject: mx5: Optimize lowlevel_init code size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Optimize mx5 lowlevel_init.S code size: - Compute values at compile time rather than at runtime where possible. - Assign r4 to hold the zero value rather than setting registers to 0 again and again. - Associate a function to setup_pll rather than expanding its large macro code multiple times. - Allocate constant values in section only if used. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Tested-by: Stefano Babic Acked-by: Stefano Babic --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 112 +++++++++++++++++---------------- 1 file changed, 59 insertions(+), 53 deletions(-) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index a40b84f..529e35b 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -24,6 +24,8 @@ #include #include +.section ".text.init", "x" + /* * L2CC Cache setup/invalidation/disable */ @@ -34,15 +36,14 @@ mcr 15, 0, r0, c1, c0, 1 /* reconfigure L2 cache aux control reg */ - mov r0, #0xC0 /* tag RAM */ - add r0, r0, #0x4 /* data RAM */ - orr r0, r0, #1 << 24 /* disable write allocate delay */ - orr r0, r0, #1 << 23 /* disable write allocate combine */ - orr r0, r0, #1 << 22 /* disable write allocate */ + ldr r0, =0xC0 | /* tag RAM */ \ + 0x4 | /* data RAM */ \ + 1 << 24 | /* disable write allocate delay */ \ + 1 << 23 | /* disable write allocate combine */ \ + 1 << 22 /* disable write allocate */ #if defined(CONFIG_MX51) - ldr r1, =0x0 - ldr r3, [r1, #ROM_SI_REV] + ldr r3, [r4, #ROM_SI_REV] cmp r3, #0x10 /* disable write combine for TO 2 and lower revs */ @@ -84,8 +85,7 @@ ldr r1, =0x00000203 str r1, [r0, #0x40] - ldr r1, =0x0 - str r1, [r0, #0x44] + str r4, [r0, #0x44] ldr r1, =0x00120125 str r1, [r0, #0x9C] @@ -98,20 +98,29 @@ .macro setup_pll pll, freq ldr r0, =\pll + adr r2, W_DP_\freq + bl setup_pll_func +.endm + +#define W_DP_OP 0 +#define W_DP_MFD 4 +#define W_DP_MFN 8 + +setup_pll_func: ldr r1, =0x00001232 str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ mov r1, #0x2 str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ - ldr r1, W_DP_OP_\freq + ldr r1, [r2, #W_DP_OP] str r1, [r0, #PLL_DP_OP] str r1, [r0, #PLL_DP_HFS_OP] - ldr r1, W_DP_MFD_\freq + ldr r1, [r2, #W_DP_MFD] str r1, [r0, #PLL_DP_MFD] str r1, [r0, #PLL_DP_HFS_MFD] - ldr r1, W_DP_MFN_\freq + ldr r1, [r2, #W_DP_MFN] str r1, [r0, #PLL_DP_MFN] str r1, [r0, #PLL_DP_HFS_MFN] @@ -120,12 +129,13 @@ 1: ldr r1, [r0, #PLL_DP_CTL] ands r1, r1, #0x1 beq 1b -.endm + + /* r10 saved upper lr */ + mov pc, lr .macro setup_pll_errata pll, freq ldr r2, =\pll - mov r1, #0x0 - str r1, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */ + str r4, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */ ldr r1, =0x00001236 str r1, [r2, #PLL_DP_CTL] /* Restart PLL with PLM=1 */ 1: ldr r1, [r2, #PLL_DP_CTL] /* Wait for lock */ @@ -158,10 +168,9 @@ /* Gate of clocks to the peripherals first */ ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] - ldr r1, =0x0 - str r1, [r0, #CLKCTL_CCGR1] - str r1, [r0, #CLKCTL_CCGR2] - str r1, [r0, #CLKCTL_CCGR3] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] ldr r1, =0x00030000 str r1, [r0, #CLKCTL_CCGR4] @@ -184,11 +193,10 @@ #else ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] - ldr r1, =0x0 - str r1, [r0, #CLKCTL_CCGR1] - str r1, [r0, #CLKCTL_CCGR2] - str r1, [r0, #CLKCTL_CCGR3] - str r1, [r0, #CLKCTL_CCGR7] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] + str r4, [r0, #CLKCTL_CCGR7] ldr r1, =0x00030000 str r1, [r0, #CLKCTL_CCGR4] @@ -214,8 +222,7 @@ /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR - ldr r1, =0x000010C0 - orr r1,r1,#CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] @@ -225,8 +232,7 @@ ldr r0, =CCM_BASE_ADDR ldr r1, =0x19239145 str r1, [r0, #CLKCTL_CBCDR] - ldr r1, =0x000020C0 - orr r1,r1,#CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] #endif setup_pll PLL3_BASE_ADDR, 216 @@ -240,8 +246,7 @@ #if defined(CONFIG_MX51) /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ - ldr r1, =0x0 - ldr r3, [r1, #ROM_SI_REV] + ldr r3, [r4, #ROM_SI_REV] cmp r3, #0x10 movls r1, #0x1 movhi r1, #0 @@ -251,14 +256,12 @@ str r1, [r0, #CLKCTL_CACRR] /* Switch ARM back to PLL 1 */ - mov r1, #0 - str r1, [r0, #CLKCTL_CCSR] + str r4, [r0, #CLKCTL_CCSR] #if defined(CONFIG_MX51) /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ - ldr r1, =0x000020C2 - orr r1,r1,#CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ ldr r1, =CONFIG_SYS_CLKTL_CBCDR @@ -289,7 +292,6 @@ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 orr r1, r1, #2 << 10 - orr r1, r1, #0 << 16 orr r1, r1, #1 << 19 str r1, [r0, #CLKCTL_CBCDR] @@ -310,8 +312,7 @@ cmp r1, #0x0 bne 1b - mov r1, #0x0 - str r1, [r0, #CLKCTL_CCDR] + str r4, [r0, #CLKCTL_CCDR] /* for cko - for ARM div by 8 */ mov r1, #0x000A0000 @@ -325,9 +326,10 @@ strh r1, [r0] .endm -.section ".text.init", "x" - ENTRY(lowlevel_init) + mov r10, lr + mov r4, #0 /* Fix R4 to 0 */ + #if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] @@ -346,21 +348,25 @@ ENTRY(lowlevel_init) init_clock - /* r12 saved upper lr*/ - mov pc,lr + mov pc, r10 ENDPROC(lowlevel_init) /* Board level setting value */ -W_DP_OP_864: .word DP_OP_864 -W_DP_MFD_864: .word DP_MFD_864 -W_DP_MFN_864: .word DP_MFN_864 +#if defined(CONFIG_MX51_PLL_ERRATA) +W_DP_864: .word DP_OP_864 + .word DP_MFD_864 + .word DP_MFN_864 W_DP_MFN_800_DIT: .word DP_MFN_800_DIT -W_DP_OP_800: .word DP_OP_800 -W_DP_MFD_800: .word DP_MFD_800 -W_DP_MFN_800: .word DP_MFN_800 -W_DP_OP_665: .word DP_OP_665 -W_DP_MFD_665: .word DP_MFD_665 -W_DP_MFN_665: .word DP_MFN_665 -W_DP_OP_216: .word DP_OP_216 -W_DP_MFD_216: .word DP_MFD_216 -W_DP_MFN_216: .word DP_MFN_216 +#else +W_DP_800: .word DP_OP_800 + .word DP_MFD_800 + .word DP_MFN_800 +#endif +#if defined(CONFIG_MX51) +W_DP_665: .word DP_OP_665 + .word DP_MFD_665 + .word DP_MFN_665 +#endif +W_DP_216: .word DP_OP_216 + .word DP_MFD_216 + .word DP_MFN_216 -- cgit v1.1