From 87acf194a298f65a40c659036a5e413613d458e6 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 21 May 2014 12:57:21 -0400 Subject: arm:am33xx: Make dram_init call sdram_init() in some contexts We have two contexts for booting these platforms. One is SPL which is roughly: reset, cpu_init_crit, lowlevel_init, s_init, sdram_init, _main, board_init_f from SPL, ... then U-Boot loads. The other is a memory-mapped XIP case (NOR or QSPI) where we do not run an SPL. In this case we go, roughly: reset, cpu_init_crit, lowlevel_init, s_init, _main, regular board_init_f. In the first case s_init will set a valid gd and then be able to call sdram_init which in many cases will need i2c (which needs a valid gd for gd->cur_i2c_bus). In this second case we must (and are able to and should) defer sdram_init() into dram_init() called by board_init_f as gd will have been set in _main and cleared in board_init_f. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 2 ++ arch/arm/cpu/armv7/am33xx/emif4.c | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index e5c922a..9a69b6c 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -238,7 +238,9 @@ void s_init(void) /* Enable RTC32K clock */ rtc32k_enable(); #endif +#ifdef CONFIG_SPL_BUILD sdram_init(); +#endif } #endif diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 2c67c32..a7a3e88 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -21,6 +21,10 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + sdram_init(); +#endif + /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( (void *)CONFIG_SYS_SDRAM_BASE, -- cgit v1.1