From 69a3b811411d7f7d58c1ad587412451e7d4ed412 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Fri, 17 Oct 2014 21:01:16 +0300 Subject: ARM: keystone: clock: add support for K2E SoCs For K2E and K2L SoCs clock output from PASS PLL has to be enabled after NETCP domain and PA module are enabled. So create new function for that and call it after PA module is enabled. Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/clock.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index 47fc893..d13fbc1 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -185,10 +185,6 @@ void init_pll(const struct pll_init_data *data) tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK); - /* set PLL Select (bit 13) for PASS PLL */ - if (data->pll == PASS_PLL) - tmp |= PLLCTL_PAPLL; - __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* Reset bit: bit 14 for both DDR3 & PASS PLL */ @@ -261,3 +257,16 @@ inline int get_max_arm_speed(void) return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds); } #endif + +void pass_pll_pa_clk_enable(void) +{ + u32 reg; + + reg = readl(keystone_pll_regs[PASS_PLL].reg1); + + reg |= PLLCTL_PAPLL; + writel(reg, keystone_pll_regs[PASS_PLL].reg1); + + /* wait till clock is enabled */ + sdelay(15000); +} -- cgit v1.1