From a6e50a88d8d3724fc75f1c6959b80a6c7c69cbad Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 18 Jul 2014 20:38:41 +0100 Subject: ahci: provide sunxi SATA driver using AHCI platform framework This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done for sun7i only since I don't have access to any other sunxi platforms with sata included. The PHY setup is derived from the Alwinner releases and Linux, but is mostly undocumented. The Allwinner AHCI controller also requires some magic (and, again, undocumented) DMA initialisation when starting a port. This is added under a suitable ifdef. This option is enabled for Cubieboard, Cubieboard2 and Cubietruck based on contents of Linux DTS files, including SATA power pin config taken from the DTS. All build tested, but runtime tested on Cubieboard2 and Cubietruck only. Signed-off-by: Ian Campbell Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index b8b16cf..ecbdb01 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -39,6 +39,10 @@ void clock_init_safe(void) setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA); #endif writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +#ifdef CONFIG_SUNXI_AHCI + setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA); + setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT); +#endif } #endif -- cgit v1.1 From fc703001365262b7dae6d11d2e32b2c8894a5e43 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 26 Jul 2014 17:09:13 +0200 Subject: sunxi: Add CONFIG_MACPWR option On some boards the ethernet-phy needs to be powered up through a gpio, add support for this. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- arch/arm/cpu/armv7/sunxi/board.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 8f2cef3..f2cedbb 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -129,6 +129,11 @@ int cpu_eth_init(bd_t *bis) { __maybe_unused int rc; +#ifdef CONFIG_MACPWR + gpio_direction_output(CONFIG_MACPWR, 1); + mdelay(200); +#endif + #ifdef CONFIG_SUNXI_EMAC rc = sunxi_emac_initialize(bis); if (rc < 0) { -- cgit v1.1 From d5db7024aafc5ea603f3a34f83bb29a1eaa3cbe7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 18 Jul 2014 21:06:38 +0100 Subject: sunxi: HYP/non-sec: add sun7i PSCI backend So far, only supporting the CPU_ON method. Other functions can be added later. Signed-off-by: Marc Zyngier Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/Makefile | 3 + arch/arm/cpu/armv7/sunxi/psci.S | 162 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/psci.S (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 6c70639..e9721b2 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -17,6 +17,9 @@ obj-$(CONFIG_SUN7I) += clock_sun4i.o ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o +ifdef CONFIG_ARMV7_PSCI +obj-y += psci.o +endif endif ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S new file mode 100644 index 0000000..0084c81 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/psci.S @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2013 - ARM Ltd + * Author: Marc Zyngier + * + * Based on code by Carl van Schaik . + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include + +/* + * Memory layout: + * + * SECURE_RAM to text_end : + * ._secure_text section + * text_end to ALIGN_PAGE(text_end): + * nothing + * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000) + * 1kB of stack per CPU (4 CPUs max). + */ + + .pushsection ._secure.text, "ax" + + .arch_extension sec + +#define ONE_MS (CONFIG_SYS_CLK_FREQ / 1000) +#define TEN_MS (10 * ONE_MS) + +.macro timer_wait reg, ticks + @ Program CNTP_TVAL + movw \reg, #(\ticks & 0xffff) + movt \reg, #(\ticks >> 16) + mcr p15, 0, \reg, c14, c2, 0 + isb + @ Enable physical timer, mask interrupt + mov \reg, #3 + mcr p15, 0, \reg, c14, c2, 1 + @ Poll physical timer until ISTATUS is on +1: isb + mrc p15, 0, \reg, c14, c2, 1 + ands \reg, \reg, #4 + bne 1b + @ Disable timer + mov \reg, #0 + mcr p15, 0, \reg, c14, c2, 1 + isb +.endm + +.globl psci_arch_init +psci_arch_init: + mrc p15, 0, r5, c1, c1, 0 @ Read SCR + bic r5, r5, #1 @ Secure mode + mcr p15, 0, r5, c1, c1, 0 @ Write SCR + isb + + mrc p15, 0, r4, c0, c0, 5 @ MPIDR + and r4, r4, #3 @ cpu number in cluster + mov r5, #400 @ 1kB of stack per CPU + mul r4, r4, r5 + + adr r5, text_end @ end of text + add r5, r5, #0x2000 @ Skip two pages + lsr r5, r5, #12 @ Align to start of page + lsl r5, r5, #12 + sub sp, r5, r4 @ here's our stack! + + bx lr + + @ r1 = target CPU + @ r2 = target PC +.globl psci_cpu_on +psci_cpu_on: + adr r0, _target_pc + str r2, [r0] + dsb + + movw r0, #(SUNXI_CPUCFG_BASE & 0xffff) + movt r0, #(SUNXI_CPUCFG_BASE >> 16) + + @ CPU mask + and r1, r1, #3 @ only care about first cluster + mov r4, #1 + lsl r4, r4, r1 + + adr r6, _sunxi_cpu_entry + str r6, [r0, #0x1a4] @ PRIVATE_REG (boot vector) + + @ Assert reset on target CPU + mov r6, #0 + lsl r5, r1, #6 @ 64 bytes per CPU + add r5, r5, #0x40 @ Offset from base + add r5, r5, r0 @ CPU control block + str r6, [r5] @ Reset CPU + + @ l1 invalidate + ldr r6, [r0, #0x184] + bic r6, r6, r4 + str r6, [r0, #0x184] + + @ Lock CPU + ldr r6, [r0, #0x1e4] + bic r6, r6, r4 + str r6, [r0, #0x1e4] + + @ Release power clamp + movw r6, #0x1ff + movt r6, #0 +1: lsrs r6, r6, #1 + str r6, [r0, #0x1b0] + bne 1b + + timer_wait r1, TEN_MS + + @ Clear power gating + ldr r6, [r0, #0x1b4] + bic r6, r6, #1 + str r6, [r0, #0x1b4] + + @ Deassert reset on target CPU + mov r6, #3 + str r6, [r5] + + @ Unlock CPU + ldr r6, [r0, #0x1e4] + orr r6, r6, r4 + str r6, [r0, #0x1e4] + + mov r0, #ARM_PSCI_RET_SUCCESS @ Return PSCI_RET_SUCCESS + mov pc, lr + +_target_pc: + .word 0 + +_sunxi_cpu_entry: + @ Set SMP bit + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x40 + mcr p15, 0, r0, c1, c0, 1 + isb + + bl _nonsec_init + bl psci_arch_init + + adr r0, _target_pc + ldr r0, [r0] + b _do_nonsec_entry + +text_end: + .popsection -- cgit v1.1