From fdb4b9a71c93d5bd9e04df52be4587516ade6fb1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 7 Feb 2013 07:16:27 +0000 Subject: tegra: usb: move controller init into start_port There is no need to init a USB controller before the upper layers indicate that they are actually going to use it. board_usb_init now only parses the device tree and sets up the common pll. Signed-off-by: Lucas Stach Acked-by: Simon Glass Signed-off-by: Tom Warren --- arch/arm/cpu/armv7/tegra20/usb.c | 57 ++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 28 deletions(-) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index 2007483..e4165e0 100644 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -79,6 +79,7 @@ struct fdt_usb { unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ unsigned enabled:1; /* 1 to enable, 0 to disable */ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ + unsigned initialized:1; /* has this port already been initialized? */ enum dr_mode dr_mode; /* dual role mode */ enum periph_id periph_id;/* peripheral id */ struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */ @@ -426,44 +427,36 @@ static void config_clock(const u32 timing[]) timing[PARAM_CPCON], timing[PARAM_LFCON]); } -/** - * Add a new USB port to the list of available ports. - * - * @param config USB port configuration - * @return 0 if ok, -1 if error (too many ports) - */ -static int add_port(struct fdt_usb *config) +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) { - if (port_count == USB_PORTS_MAX) { - printf("tegrausb: Cannot register more than %d ports\n", - USB_PORTS_MAX); + struct fdt_usb *config; + struct usb_ctlr *usbctlr; + + if (portnum >= port_count) return -1; - } + + config = &port[portnum]; + + /* skip init, if the port is already initialized */ + if (config->initialized) + goto success; if (config->utmi && init_utmi_usb_controller(config)) { - printf("tegrausb: Cannot init port\n"); + printf("tegrausb: Cannot init port %d\n", portnum); return -1; } if (config->ulpi && init_ulpi_usb_controller(config)) { - printf("tegrausb: Cannot init port\n"); + printf("tegrausb: Cannot init port %d\n", portnum); return -1; } - port[port_count++] = *config; - - return 0; -} - -int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) -{ - struct usb_ctlr *usbctlr; + set_host_mode(config); - if (portnum >= port_count) - return -1; - set_host_mode(&port[portnum]); + config->initialized = 1; - usbctlr = port[portnum].reg; +success: + usbctlr = config->reg; *hccr = (u32)&usbctlr->cap_length; *hcor = (u32)&usbctlr->usb_cmd; return 0; @@ -483,6 +476,8 @@ int tegrausb_stop_port(int portnum) writel(2, &usbctlr->usb_cmd); udelay(1000); + port[portnum].initialized = 0; + return 0; } @@ -546,6 +541,12 @@ int board_usb_init(const void *blob) count = fdtdec_find_aliases_for_id(blob, "usb", COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX); for (i = 0; i < count; i++) { + if (port_count == USB_PORTS_MAX) { + printf("tegrausb: Cannot register more than %d ports\n", + USB_PORTS_MAX); + return -1; + } + debug("USB %d: ", i); node = node_list[i]; if (!node) @@ -555,10 +556,10 @@ int board_usb_init(const void *blob) fdt_get_name(blob, node, NULL)); return -1; } + config.initialized = 0; - if (add_port(&config)) - return -1; - set_host_mode(&config); + /* add new USB port to the list of available ports */ + port[port_count++] = config; } return 0; -- cgit v1.1