From a896211ff11d6eba553df710168fcab2a1b2d9ec Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 26 Sep 2012 00:14:37 +0200 Subject: tegra20: port to new ehci interface EHCI interface now supports more than one controller. Wire up our usb functions to use this new interface. Signed-off-by: Lucas Stach --- arch/arm/cpu/armv7/tegra20/usb.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index cac0918..eda8e6f 100644 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -77,7 +77,6 @@ struct fdt_usb { static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ static unsigned port_count; /* Number of available ports */ -static int port_current; /* Current port (-1 = none) */ /* * This table has USB timing parameters for each Oscillator frequency we @@ -351,30 +350,25 @@ static int add_port(struct fdt_usb *config, const u32 timing[]) return 0; } -int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor) +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) { struct usb_ctlr *usbctlr; if (portnum >= port_count) return -1; - tegrausb_stop_port(); set_host_mode(&port[portnum]); usbctlr = port[portnum].reg; *hccr = (u32)&usbctlr->cap_length; *hcor = (u32)&usbctlr->usb_cmd; - port_current = portnum; return 0; } -int tegrausb_stop_port(void) +int tegrausb_stop_port(int portnum) { struct usb_ctlr *usbctlr; - if (port_current == -1) - return -1; - - usbctlr = port[port_current].reg; + usbctlr = port[portnum].reg; /* Stop controller */ writel(0, &usbctlr->usb_cmd); @@ -383,7 +377,7 @@ int tegrausb_stop_port(void) /* Initiate controller reset */ writel(2, &usbctlr->usb_cmd); udelay(1000); - port_current = -1; + return 0; } @@ -459,7 +453,6 @@ int board_usb_init(const void *blob) return -1; set_host_mode(&config); } - port_current = -1; return 0; } -- cgit v1.1